jens/HendiControlFirmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Commit Graph

  • 8e75279d17 - fixed silk screen - finalized jens 2019-03-19 21:48:18 +00:00
  • c1ff758385 - finalize jens 2019-03-19 21:34:11 +00:00
  • e0a5c8fff0 - DRC clean jens 2019-03-19 21:24:01 +00:00
  • 5638f9c5f5 - changed to non-plate mounting holes jens 2019-03-19 21:15:06 +00:00
  • 6259925298 - USB shield is connected via jumper jens 2019-03-19 20:59:07 +00:00
  • 0ebd346ded - changed values - changed silk screen jens 2019-03-18 21:30:21 +00:00
  • e04b4f6d40 - updated footprints in schematics - added order information to components jens 2019-03-18 20:45:05 +00:00
  • 43f94b572f - thicker trace for GNDD jens 2019-03-18 19:14:38 +00:00
  • 2f7ac5c534 - changed DAC VREFs - changed AREF - ADC6, ADC7 tied to GNDD jens 2019-03-18 19:06:28 +00:00
  • ea7131028b - fixed silk screen of TPs and LEDs jens 2019-03-18 16:51:43 +00:00
  • 7f9b9dc6f3 - added test point jens 2019-03-18 06:44:22 +00:00
  • 0737856e20 - routed Schmitt trgger -added test points jens 2019-03-17 18:10:35 +00:00
  • 5fd6c13e95 - added Schmitt Trigger jens 2019-03-15 17:04:55 +00:00
  • 1e2055f5c7 - re-created netlist jens 2019-03-12 18:09:53 +00:00
  • e8b8600e1e - swapped pins J1 Poti jens 2019-03-12 18:08:30 +00:00
  • d7eaa5559a - swapped pins J1 Poti jens 2019-03-12 18:06:50 +00:00
  • 094b81f485 - optimized track widths jens 2019-03-11 19:29:41 +00:00
  • 0539c9b57e - use ISO7341 as isolation - removed solder jumper for #RST and #BSEL jens 2019-03-11 16:02:08 +00:00
  • a6c361a600 - fixed paths for stimulus jens 2019-03-08 21:41:39 +00:00
  • 4db2541543 - added serial test jens 2019-03-08 21:00:08 +00:00
  • bce2a0f42e - improved simulations - addd boot reset logic with schmitt trigger jens 2019-03-08 20:59:31 +00:00
  • fe83130f22 - added symlib-table - fixed name #BOOTSEL to #BSEL jens 2019-03-08 18:05:53 +00:00
  • 9482d5f390 - reniced routing jens 2019-03-08 07:56:14 +00:00
  • 622341d0e1 - finished routing jens 2019-03-07 20:34:45 +00:00
  • 662d1461d2 - started routing jens 2019-03-07 18:55:28 +00:00
  • 603ca96990 - updated net names jens 2019-03-06 19:23:49 +00:00
  • 3a9466d04d - added copper plane vor +5VD and GNDD jens 2019-03-06 17:30:52 +00:00
  • a7d3f88304 - added copper plane vor +5VD and GNDD jens 2019-03-06 17:16:28 +00:00
  • 1d3abdc82c - added extra 100nF caps to sw_in and sw_out jens 2019-03-06 17:02:20 +00:00
  • 51a055f006 - changed values of dedicated LEDs jens 2019-03-06 16:43:07 +00:00
  • 77e6cbb742 - removed J4 (Common for LED{0..3}) jens 2019-03-06 16:35:53 +00:00
  • b38cf685f4 - added some extra LEDs - fixed silk screen jens 2019-03-06 16:07:14 +00:00
  • 57dc2bb22f - fixed footprints - new placement - fixed silk screen jens 2019-03-06 16:02:40 +00:00
  • 3414f195fc - fixed footprints - new placement jens 2019-03-06 13:58:04 +00:00
  • f35c5e96ba - fixed footprints - new placement jens 2019-03-06 07:59:26 +00:00
  • 1760a46f41 - exit remote state by switching off jens 2019-03-05 23:19:26 +00:00
  • 3460c4ba93 - fixed footprints - started PCB Layout jens 2019-03-05 23:12:06 +00:00
  • b86c3141a8 - assigned footprints jens 2019-03-05 19:24:49 +00:00
  • 8945b091a1 - fixed paths jens 2019-03-05 17:36:59 +00:00
  • 6ba9d4005f - changed Mosfet - removed caps from Boot/Reset logic jens 2019-03-05 17:20:33 +00:00
  • 6174289546 - added LTSpice sims jens 2019-03-05 17:20:04 +00:00
  • 8252d76134 - added BOM plugin jens 2019-03-05 07:45:38 +00:00
  • 3ffe43b668 - added net names jens 2019-03-05 07:40:31 +00:00
  • 31e91d7380 - changed RST and Bootsel logic jens 2019-03-05 07:38:26 +00:00
  • f5fe03340f - added suspend mode command 'X' - added timerStop() jens 2019-03-04 20:57:34 +00:00
  • 2d0b37a15d - added Heartbeat LED jens 2019-03-04 20:22:43 +00:00
  • be44dc4384 - moved parts jens 2019-03-04 20:07:12 +00:00
  • 92f6eb45fc - swapped pins jens 2019-03-04 20:06:33 +00:00
  • 1754c7dbea - changed symbol jens 2019-03-04 20:02:32 +00:00
  • c0a91e190a - replaced connectors for USB and Hendi jens 2019-03-04 19:50:47 +00:00
  • 19983a3fcb - some improvements jens 2019-03-04 19:30:16 +00:00
  • 2282ac967d - filter MCURST from FTDI jens 2019-03-04 18:59:23 +00:00
  • 84ed070c0c - replace FT232BL with FT232RL - removed EEPROM - added Isolation circuit for Reset and Bootselection using FTDI GPIO jens 2019-03-04 18:50:19 +00:00
  • cc3a619f92 - switch on power on leaving Error state jens 2019-03-04 16:39:39 +00:00
  • 5b01cd0926 [bootloader] - reduce memory footprint - bugfix writing last page jens 2019-03-04 16:38:52 +00:00
  • 349b6b606a -update jens 2019-03-03 18:03:18 +00:00
  • 8ffde0bfc2 - fixed data corruption after flash jens 2019-03-03 17:07:32 +00:00
  • e4f76ab728 - set baudrate to 9600 jens 2019-03-03 15:25:01 +00:00
  • fda682f386 -bootloader is flashing jens 2019-03-03 15:24:44 +00:00
  • 2c6927ff43 - working SREC jens 2019-03-03 12:34:46 +00:00
  • 9776a64598 - deleted jens 2019-03-03 08:59:48 +00:00
  • 665bfeaf24 - added Bootloader jens 2019-03-03 08:58:33 +00:00
  • 45c0ce7028 - added jens 2019-03-03 08:57:06 +00:00
  • b915c39801 - UART takes baudrate on init - UART calculate optimized baud prescaler jens 2019-03-03 08:39:07 +00:00
  • 62a224defa - added brewpi jens 2019-03-02 20:46:22 +00:00
  • 0d9c2ef914 - added hardware prototype jens 2019-03-02 20:40:12 +00:00
  • ff0726ddf7 - switch power off in case of error jens 2019-03-02 17:28:02 +00:00
  • e7ac943fcf - FIFO: bugfix malloc jens 2019-03-02 17:27:42 +00:00
  • a52eb0f49d - put vars on heap jens 2019-03-02 17:06:48 +00:00
  • 08187856ac - always echo chars jens 2019-03-02 16:16:44 +00:00
  • 7dacfb0124 - reenable printf jens 2019-03-02 16:08:32 +00:00
  • 6998950021 - main: no global vars - changed data types in fifo jens 2019-03-02 16:07:39 +00:00
  • 0b22e8a084 - decreased baudrate - add PRINT jens 2019-03-02 15:32:40 +00:00
  • 46d4de49e1 - some uart changes jens 2019-03-02 14:58:42 +00:00
  • c092db8909 - introduced enterCritical, exitCritial jens 2019-03-02 14:28:06 +00:00
  • a94413670a - fifo ommit memcpy - volatilize jens 2019-03-02 13:31:52 +00:00
  • f5391f55e9 - decreased fifo capscity to 16 items - increased poti samplerate to 20 Hz jens 2019-03-02 11:28:13 +00:00
  • 7f6dfc2928 - explicit disable wdt_disable - use switch for leaving error mode - use Uart with message fifo - fixed portGet, added PwrSwitch_in jens 2019-03-02 11:17:38 +00:00
  • 0bd94e6859 - no update of DAC in error state jens 2019-02-28 22:09:06 +00:00
  • 8c83ebf1fb - software timer is event based - completed main functions jens 2019-02-28 21:59:52 +00:00
  • 8a8bb762e0 - adc is event based - changed timer frequency - prepared for SW timer - added PowerSwitch_in jens 2019-02-28 19:18:40 +00:00
  • a22ffe8384 - added motor control jens 2019-02-27 19:49:14 +00:00
  • 6ab62bf658 - MAX31865: use oneshot mode jens 2019-02-27 17:31:10 +00:00
  • 97033019fd - added jens 2019-02-27 17:23:35 +00:00
  • b11b8148ae - added jens 2019-02-27 17:18:31 +00:00
  • cc40be4a57 - added jens 2019-02-25 20:19:01 +00:00
  • 1e414e42df - DRC passed jens 2019-02-21 19:03:28 +00:00
  • f6fca1e28b - fixed ports - added power switch and command - temporarly disabled command and ADC event jens 2019-02-20 22:17:14 +00:00
  • 7f5ccbfc73 -refactored jens 2019-02-20 20:01:23 +00:00
  • a794460fdc - added jens 2019-02-20 20:01:04 +00:00
  • 21dacf4be6 - added lib jens 2019-02-19 21:46:48 +00:00
  • 3aece96f53 - added mounting holes jens 2019-02-19 21:46:16 +00:00
  • d9b69949d1 - improved DAC_VREF jens 2019-02-19 21:30:58 +00:00
  • e7d9218ecf - added DAC jens 2019-02-19 21:12:13 +00:00
  • ca7ce3dce5 - added isolation - added component values - revised jens 2019-02-19 20:31:52 +00:00
  • 8886e6eeae - fixed AREF jens 2019-02-18 21:05:51 +00:00
  • 36c8bf481a - cleaned up - add MCP47x6 code jens 2019-02-18 20:43:41 +00:00
  • cef75ff414 - cleaned up - increased baudrate to 38400 jens 2019-02-18 19:52:06 +00:00
  • db04109912 - increased I2C bus speed - added message Fifo jens 2019-02-18 19:27:34 +00:00
  • 15df3f87ab - added I2C DAC jens 2019-02-14 22:18:55 +00:00