jens
2edaa4d7cb
git-svn-id: http://moon:8086/svn/vhdl/trunk@1290 cc03376c-175c-47c8-b038-4cd826a8556b
2603 lines
92 KiB
Verilog
2603 lines
92 KiB
Verilog
//////////////////////////////////////////////////////////////////////////////
|
||
// File name : s25fl064p.v
|
||
//////////////////////////////////////////////////////////////////////////////
|
||
// Copyright (C) 2012 Spansion, LLC.
|
||
//
|
||
// MODIFICATION HISTORY :
|
||
//
|
||
// version: | author: | mod date: | changes made:
|
||
// V1.0 D.Stanojkovic 08 Jan 22 Inital Release
|
||
// V1.1 D.Stanojkovic 08 Feb 20 BP bits setting corrected
|
||
// V1.2 D.Stanojkovic 08 Mar 04 MPM mode corrected
|
||
// V1.3 D.Stanojkovic 08 Mar 20 MPM mode removed
|
||
// v1.4 J.Stoickov 08 Aug 07 WEL bit corrected
|
||
// V1.5 J.Stoickov 08 Dec 10 Latest datasheet aligned
|
||
// (S25FL129 064 032P)
|
||
// Program Error bit will not be
|
||
// set after programming in
|
||
// protect memory region
|
||
// V1.6 V.Mancev 10 Sep 29 Implementation of internal pull-up
|
||
// for HOLDNeg and WPNeg pins
|
||
// V1.7 V.Mancev 12 Jan 13 Latest datasheet aligned
|
||
// (S25FL064P_00_05)
|
||
//////////////////////////////////////////////////////////////////////////////
|
||
// PART DESCRIPTION:
|
||
//
|
||
// Library: FLASH
|
||
// Technology: FLASH MEMORY
|
||
// Part: S25FL064P
|
||
//
|
||
// Description:64 Megabit Serial Flash Memory with 104 MHz SPI Bus Interface
|
||
// Comments :
|
||
// For correct simulation, simulator resolution should be set to 1 ps
|
||
//
|
||
//////////////////////////////////////////////////////////////////////////////
|
||
// Known Bugs:
|
||
//
|
||
//////////////////////////////////////////////////////////////////////////////
|
||
|
||
//////////////////////////////////////////////////////////////////////////////
|
||
// MODULE DECLARATION //
|
||
//////////////////////////////////////////////////////////////////////////////
|
||
`timescale 1 ps/1 ps
|
||
module s25fl064p
|
||
(
|
||
SCK ,
|
||
SI ,
|
||
|
||
CSNeg ,
|
||
HOLDNeg ,
|
||
WPNeg ,
|
||
SO
|
||
);
|
||
////////////////////////////////////////////////////////////////////////
|
||
// Port / Part SOIn Declarations
|
||
////////////////////////////////////////////////////////////////////////
|
||
input SCK ;
|
||
inout SI ;
|
||
|
||
input CSNeg ;
|
||
inout HOLDNeg ;
|
||
inout WPNeg ;
|
||
inout SO ;
|
||
|
||
// interconnect path delay signals
|
||
wire SCK_ipd ;
|
||
wire SI_ipd ;
|
||
|
||
wire SI_in ;
|
||
assign SI_in = SI_ipd ;
|
||
|
||
wire SI_out ;
|
||
assign SI_out = SI ;
|
||
|
||
wire CSNeg_ipd ;
|
||
wire HOLDNeg_ipd ;
|
||
wire WPNeg_ipd ;
|
||
wire SO_ipd ;
|
||
|
||
wire HOLDNeg_in ;
|
||
//Internal pull-up
|
||
assign HOLDNeg_in = (HOLDNeg_ipd === 1'bx) ? 1'b1 : HOLDNeg_ipd;
|
||
|
||
wire HOLDNeg_out ;
|
||
assign HOLDNeg_out = HOLDNeg ;
|
||
|
||
wire WPNeg_in ;
|
||
//Internal pull-up
|
||
assign WPNeg_in = (WPNeg_ipd === 1'bx) ? 1'b1 : WPNeg_ipd;
|
||
|
||
wire WPNeg_out ;
|
||
assign WPNeg_out = WPNeg ;
|
||
|
||
wire SOIn ;
|
||
assign SOIn = SO_ipd ;
|
||
|
||
wire SOut ;
|
||
assign SOut = SO ;
|
||
|
||
// internal delays
|
||
reg PP_in ;
|
||
reg PP_out ;
|
||
reg PU_in ;
|
||
reg PU_out ;
|
||
reg SE_in ;
|
||
reg SE_out ;
|
||
reg BE_in ;
|
||
reg BE_out ;
|
||
reg PE_in ;
|
||
reg PE_out ;
|
||
reg WR_in ;
|
||
reg WR_out ;
|
||
reg DP_in ;
|
||
reg DP_out ;
|
||
reg EP_in ;
|
||
reg EP_out ;
|
||
reg RES_in ;
|
||
reg RES_out ;
|
||
|
||
reg SOut_zd = 1'bZ;
|
||
reg SOut_z = 1'bZ;
|
||
|
||
wire SI_z ;
|
||
wire SO_z ;
|
||
|
||
reg SIOut_zd = 1'bZ ;
|
||
reg SIOut_z = 1'bZ ;
|
||
|
||
reg WPNegOut_zd = 1'bZ ;
|
||
reg HOLDNegOut_zd = 1'bZ ;
|
||
|
||
assign SI_z = SIOut_z;
|
||
assign SO_z = SOut_z;
|
||
|
||
parameter UserPreload = 1;
|
||
parameter mem_file_name = "none";//"s25fl064p.mem";
|
||
parameter otp_file_name = "none";//"s25fl064p_secsi.mem";
|
||
|
||
parameter TimingModel = "DefaultTimingModel";
|
||
|
||
parameter PartID = "s25fl064p";
|
||
parameter MaxData = 255;
|
||
parameter SecSize = 16'hFFFF;
|
||
parameter SecSize_4 = 4095;
|
||
parameter SecSize_8 = 8191;
|
||
parameter SecNum = 127;
|
||
parameter PageNum = 16'h7FFF;
|
||
parameter OTPSize = 511;
|
||
parameter OTPLoAddr = 9'h100;
|
||
parameter OTPHiAddr = 10'h2FF;
|
||
parameter HiAddrBit = 23;
|
||
parameter AddrRANGE = 24'h7FFFFF;
|
||
parameter BYTE = 8;
|
||
parameter Manuf_ID = 8'h01;
|
||
parameter ES = 8'h16;
|
||
parameter Jedec_ID = 8'h20; // first byte of Device ID
|
||
parameter DeviceID = 16'h0216;
|
||
parameter ExtendedBytes = 8'h4D;
|
||
parameter ReservedBytes = 8'h00;
|
||
|
||
// If speed simulation is needed uncomment following line
|
||
|
||
//`define SPEEDSIM;
|
||
|
||
// powerup
|
||
reg PoweredUp;
|
||
|
||
//FSM control signals
|
||
reg PDONE ; ////Prog. Done
|
||
reg PSTART ; ////Start Programming
|
||
|
||
reg EDONE ; ////Era. Done
|
||
reg ESTART ; ////Start Erasing
|
||
|
||
reg WDONE ; //// Writing Done
|
||
reg WSTART ; ////Start writing
|
||
|
||
//Command Register
|
||
reg write;
|
||
reg cfg_write;
|
||
reg read_out;
|
||
|
||
//Status reg.
|
||
reg[7:0] Status_reg = 8'b0;
|
||
reg[7:0] Status_reg_in = 8'b0;
|
||
reg[7:0] Sec_conf_reg = 8'b0;
|
||
reg[7:0] Sec_conf_reg_in = 8'b0;
|
||
|
||
wire FREEZE;
|
||
wire QUAD;
|
||
wire TBPARM;
|
||
wire BPNV;
|
||
wire TBPROT;
|
||
assign FREEZE = Sec_conf_reg[0];
|
||
assign QUAD = Sec_conf_reg[1];
|
||
assign TBPARM = Sec_conf_reg[2];
|
||
assign BPNV = Sec_conf_reg[3];
|
||
assign TBPROT = Sec_conf_reg[5];
|
||
|
||
wire WIP;
|
||
wire WEL;
|
||
wire [2:0]BP;
|
||
wire E_ERR;
|
||
wire P_ERR;
|
||
wire SRWD;
|
||
assign WIP = Status_reg[0];
|
||
assign WEL = Status_reg[1];
|
||
assign BP = Status_reg[4:2];
|
||
assign E_ERR = Status_reg[5];
|
||
assign P_ERR = Status_reg[6];
|
||
assign SRWD = Status_reg[7];
|
||
|
||
integer SA = 0; // 0 TO SecNum+1
|
||
integer Byte_number = 0;
|
||
integer sect;
|
||
|
||
//Address
|
||
integer Address = 0; // 0 - AddrRANGE
|
||
reg change_addr;
|
||
reg rd_fast; // = 1'b1;
|
||
reg rd_slow;
|
||
reg rd_jedec;
|
||
reg change_BP = 0;
|
||
reg rd_dual;
|
||
reg dual;
|
||
wire fast_rd;
|
||
wire rd;
|
||
wire rd_jid;
|
||
|
||
wire RD_EQU_1;
|
||
assign RD_EQU_1 = rd_slow;
|
||
|
||
wire RD_EQU_0;
|
||
assign RD_EQU_0 = ~rd_slow;
|
||
|
||
reg hold_mode;
|
||
reg mpm_mode = 0;
|
||
reg initial_config = 0;
|
||
wire hold;
|
||
|
||
//Sector Protection Status
|
||
reg [SecNum:0] Sec_Prot = 127'b0; //= SecNum'b0;
|
||
|
||
// timing check violation
|
||
reg Viol = 1'b0;
|
||
|
||
integer Mem[0:AddrRANGE];
|
||
integer OTPMem[OTPLoAddr: OTPHiAddr];
|
||
|
||
integer WByte[0:255];
|
||
integer WOTPByte;
|
||
integer AddrLo;
|
||
integer AddrHi;
|
||
|
||
reg[7:0] old_bit, new_bit;
|
||
integer old_int, new_int;
|
||
integer wr_cnt;
|
||
integer cnt;
|
||
|
||
integer read_cnt = 0;
|
||
integer read_addr = 0;
|
||
reg[7:0] data_out;
|
||
reg[647:0] ident_out;
|
||
|
||
reg oe = 1'b0;
|
||
event oe_event;
|
||
|
||
integer CFI_array[8'h07:8'h50];
|
||
reg [591:0] CFI_array_tmp;
|
||
reg [7:0] CFI_tmp;
|
||
|
||
reg[15:0] PR_LOCK1;
|
||
reg[15:0] PR_LOCK2;
|
||
reg[15:0] PR_LOCK3;
|
||
///////////////////////////////////////////////////////////////////////////////
|
||
//Interconnect Path Delay Section
|
||
///////////////////////////////////////////////////////////////////////////////
|
||
|
||
buf (SCK_ipd, SCK);
|
||
buf (SI_ipd, SI);
|
||
|
||
buf (CSNeg_ipd, CSNeg);
|
||
buf (HOLDNeg_ipd, HOLDNeg);
|
||
buf (WPNeg_ipd, WPNeg);
|
||
buf (SO_ipd, SO);
|
||
|
||
///////////////////////////////////////////////////////////////////////////////
|
||
// Propagation delay Section
|
||
///////////////////////////////////////////////////////////////////////////////
|
||
nmos (SO, SO_z , 1);
|
||
|
||
nmos (SI, SI_z , 1);
|
||
nmos (HOLDNeg, HOLDNegOut_zd , 1);
|
||
nmos (WPNeg, WPNegOut_zd , 1);
|
||
|
||
wire deg_pin;
|
||
wire deg_sin;
|
||
wire deg_holdin;
|
||
//VHDL VITAL CheckEnable equivalents
|
||
wire dual_wr;
|
||
assign dual_wr = deg_holdin && QUAD;
|
||
wire quad_wr;
|
||
assign quad_wr = SRWD && WEL ;
|
||
wire dual_rd;
|
||
assign dual_rd = dual;
|
||
wire power;
|
||
assign power = PoweredUp;
|
||
|
||
specify
|
||
// tipd delays: interconnect path delays , mapped to input port delays.
|
||
// In Verilog is not necessary to declare any tipd_ delay variables,
|
||
// they can be taken from SDF file
|
||
// With all the other delays real delays would be taken from SDF file
|
||
|
||
// tpd delays
|
||
specparam tpd_SCK_SO =1;
|
||
specparam tpd_SCK_SI =1;
|
||
specparam tpd_CSNeg_SO =1;
|
||
specparam tpd_HOLDNeg_SO =1;
|
||
|
||
specparam tsetup_SI_SCK =1; //tsuDAT /
|
||
specparam tsetup_CSNeg_SCK =1; // tCSS /
|
||
specparam tsetup_HOLDNeg_SCK =1; //tHD /
|
||
specparam tsetup_SCK_HOLDNeg =1; //tCH \
|
||
specparam tsetup_WPNeg_CSNeg =1; //tWPS \
|
||
|
||
// thold values: hold times
|
||
specparam thold_SI_SCK =1; //thdDAT /
|
||
specparam thold_CSNeg_SCK =1; //tCSH /
|
||
specparam thold_HOLDNeg_SCK =1; //tCHHH /
|
||
specparam thold_SCK_HOLDNeg =1; //tHC \
|
||
specparam thold_WPNeg_CSNeg =1; //tWPH \
|
||
|
||
// tpw values: pulse width
|
||
specparam tpw_SCK_fast_posedge =1; //tWH
|
||
specparam tpw_SCK_posedge =1; //tWH
|
||
specparam tpw_SCK_dual_posedge =1; //tWH
|
||
specparam tpw_SCK_rdid_posedge =1; //tWH
|
||
specparam tpw_SCK_fast_negedge =1; //tWL
|
||
specparam tpw_SCK_negedge =1; //tWL
|
||
specparam tpw_SCK_dual_negedge =1; //tWL
|
||
specparam tpw_SCK_rdid_negedge =1; //tWL
|
||
specparam tpw_CSNeg_read_posedge =1; //tCS
|
||
specparam tpw_CSNeg_pgm_posedge =1; //tCS
|
||
|
||
// tperiod min (calculated as 1/max freq)
|
||
specparam tperiod_SCK_rd =1; // fSCK = 40MHz
|
||
specparam tperiod_SCK_fast_rd =1; // fSCK = 104MHz
|
||
specparam tperiod_SCK_dual_fast_rd =1; // fSCK = 80MHz
|
||
specparam tperiod_SCK_rdid =1; // fSCK = 50MHz
|
||
|
||
// tdevice values: values for internal delays
|
||
`ifdef SPEEDSIM
|
||
// Page Program Operation
|
||
specparam tdevice_PP = 3e7; //30 us;
|
||
//Page Program Operation (ACC=9V))
|
||
specparam tdevice_EP = 2.4e9; //2.4 ms;
|
||
//Sector Erase Operation
|
||
specparam tdevice_SE = 2e9; //2 ms;
|
||
//Bulk Erase Operation
|
||
specparam tdevice_BE = 128e9; //128 ms;
|
||
//Write Status Register Operation
|
||
specparam tdevice_WR = 1e9; // 1 ms;
|
||
//Software Protect Mode
|
||
specparam tdevice_DP = 10000000; // 10 us;
|
||
//Release from Software Protect Mode
|
||
specparam tdevice_RES = 30000000; // 30 us;
|
||
//Parameter block erase
|
||
specparam tdevice_PE = 800e6; //800 us;
|
||
//VCC (min) to CS# Low
|
||
specparam tdevice_PU = 300000000; //300 us;
|
||
`else
|
||
// Page Program Operation
|
||
specparam tdevice_PP = 3e9; //3 ms;
|
||
//Page Program Operation (ACC=9V))
|
||
specparam tdevice_EP = 2.4e9; //2.4 ms;
|
||
//Sector Erase Operation
|
||
specparam tdevice_SE = 2e12; //2 s;
|
||
//Bulk Erase Operation
|
||
specparam tdevice_BE = 128e12; //128 sec;
|
||
//Write Status Register Operation
|
||
specparam tdevice_WR = 100e9; // 100 ms;
|
||
//Software Protect Mode
|
||
specparam tdevice_DP = 10000000; // 10 us;
|
||
//Release from Software Protect Mode
|
||
specparam tdevice_RES = 30000000; // 30 us;
|
||
//Parameter block erase
|
||
specparam tdevice_PE = 800e9; //800 ms;
|
||
//VCC (min) to CS# Low
|
||
specparam tdevice_PU = 300000000; //300 us;
|
||
`endif//SPEEDSIM
|
||
|
||
///////////////////////////////////////////////////////////////////////////////
|
||
// Input Port Delays don't require Verilog description
|
||
///////////////////////////////////////////////////////////////////////////////
|
||
// Path delays //
|
||
///////////////////////////////////////////////////////////////////////////////
|
||
if (~dual) (SCK => SO) = tpd_SCK_SO;
|
||
if (dual) (SCK => SO) = tpd_SCK_SI;
|
||
if (CSNeg)(CSNeg => SO) = tpd_CSNeg_SO;
|
||
if (~dual) (HOLDNeg => SO) = tpd_HOLDNeg_SO;
|
||
if (dual) (HOLDNeg => SO) = tpd_HOLDNeg_SO;
|
||
|
||
if (dual)(SCK => SI) = tpd_SCK_SI;
|
||
if (dual && CSNeg)(CSNeg => SI) = tpd_CSNeg_SO;
|
||
if (dual)(HOLDNeg => SI) = tpd_HOLDNeg_SO;
|
||
|
||
if (dual && QUAD)(SCK => HOLDNeg) = tpd_SCK_SI;
|
||
if (dual && CSNeg && QUAD)(CSNeg => HOLDNeg) = tpd_CSNeg_SO;
|
||
|
||
if (dual && QUAD)(SCK => WPNeg) = tpd_SCK_SI;
|
||
if (dual && CSNeg && QUAD)(CSNeg => WPNeg) = tpd_CSNeg_SO;
|
||
////////////////////////////////////////////////////////////////////////////////
|
||
// Timing Violation //
|
||
////////////////////////////////////////////////////////////////////////////////
|
||
$setup ( SI , posedge SCK &&& deg_sin,
|
||
tsetup_SI_SCK, Viol);
|
||
$setup ( negedge HOLDNeg, posedge SCK &&& dual_wr,
|
||
tsetup_HOLDNeg_SCK, Viol);
|
||
$setup ( posedge SCK , posedge HOLDNeg &&& dual_wr,
|
||
tsetup_SCK_HOLDNeg, Viol);
|
||
$setup ( CSNeg , posedge SCK &&& power,
|
||
tsetup_CSNeg_SCK, Viol);
|
||
$setup ( WPNeg , negedge CSNeg &&& WPNeg,
|
||
tsetup_WPNeg_CSNeg, Viol);
|
||
|
||
$hold ( posedge SCK , SI &&& deg_sin,
|
||
thold_SI_SCK, Viol);
|
||
$hold ( posedge HOLDNeg , posedge SCK &&& dual_wr,
|
||
thold_SCK_HOLDNeg, Viol);
|
||
$hold ( posedge SCK , CSNeg &&& power,
|
||
thold_CSNeg_SCK, Viol);
|
||
$hold ( posedge CSNeg , WPNeg &&& quad_wr,
|
||
thold_WPNeg_CSNeg, Viol);
|
||
$hold ( posedge SCK , negedge HOLDNeg &&& dual_wr,
|
||
thold_HOLDNeg_SCK, Viol);
|
||
|
||
$width (posedge SCK &&& rd , tpw_SCK_posedge);
|
||
$width (posedge SCK &&& fast_rd , tpw_SCK_fast_posedge);
|
||
$width (posedge SCK &&& dual_rd , tpw_SCK_dual_posedge);
|
||
$width (posedge SCK &&& rd_jid , tpw_SCK_rdid_posedge);
|
||
$width (negedge SCK &&& rd , tpw_SCK_negedge);
|
||
$width (negedge SCK &&& fast_rd , tpw_SCK_fast_negedge);
|
||
$width (negedge SCK &&& dual_rd , tpw_SCK_dual_negedge);
|
||
$width (negedge SCK &&& rd_jid , tpw_SCK_rdid_negedge);
|
||
|
||
$width (posedge CSNeg &&& RD_EQU_0, tpw_CSNeg_pgm_posedge);
|
||
$width (posedge CSNeg &&& RD_EQU_1, tpw_CSNeg_read_posedge);
|
||
|
||
$period (posedge SCK &&& rd, tperiod_SCK_rd);
|
||
$period (posedge SCK &&& fast_rd, tperiod_SCK_fast_rd);
|
||
$period (posedge SCK &&& dual_rd, tperiod_SCK_dual_fast_rd);
|
||
$period (posedge SCK &&& rd_jid, tperiod_SCK_rdid);
|
||
|
||
endspecify
|
||
|
||
////////////////////////////////////////////////////////////////////////////////
|
||
// Main Behavior Block //
|
||
////////////////////////////////////////////////////////////////////////////////
|
||
// FSM states
|
||
parameter IDLE =4'd0;
|
||
parameter WRITE_SR =4'd1;
|
||
parameter DP_DOWN_WAIT =4'd2;
|
||
parameter DP_DOWN =4'd3;
|
||
parameter SECTOR_ER =4'd4;
|
||
parameter BULK_ER =4'd5;
|
||
parameter PAGE_PG =4'd6;
|
||
parameter OTP_PG =4'd7;
|
||
parameter P4_ER =4'd8;
|
||
parameter P8_ER =4'd9;
|
||
|
||
reg [3:0] current_state;
|
||
reg [3:0] next_state;
|
||
|
||
// Instructions
|
||
parameter NONE =5'd0;
|
||
parameter WREN =5'd1;
|
||
parameter WRDI =5'd2;
|
||
parameter WRR =5'd3;
|
||
parameter RDSR =5'd4;
|
||
parameter READ =5'd5;
|
||
parameter READ_ID =5'd6;
|
||
parameter RDID =5'd7;
|
||
parameter FAST_READ =5'd8;
|
||
parameter DUAL_READ =5'd9;
|
||
parameter QUAD_READ =5'd10;
|
||
parameter DH_READ =5'd11;
|
||
parameter QH_READ =5'd12;
|
||
parameter SE =5'd13;
|
||
parameter BE =5'd14;
|
||
parameter PP =5'd15;
|
||
parameter QPP =5'd16;
|
||
parameter DP =5'd17;
|
||
parameter RES_READ_ES =5'd18;
|
||
parameter CLSR =5'd19;
|
||
parameter RCR =5'd20;
|
||
parameter P4E =5'd21;
|
||
parameter P8E =5'd22;
|
||
parameter OTPP =5'd23;
|
||
parameter OTPR =5'd24;
|
||
reg [4:0] Instruct;
|
||
|
||
//Bus cycle states
|
||
parameter STAND_BY =3'd0;
|
||
parameter CODE_BYTE =3'd1;
|
||
parameter ADDRESS_BYTES =3'd2;
|
||
parameter DUMMY_BYTES =3'd3;
|
||
parameter MODE_BYTE =3'd4;
|
||
parameter DATA_BYTES =3'd5;
|
||
|
||
reg [2:0] bus_cycle_state;
|
||
|
||
reg deq_pin;
|
||
always @(SOIn, SO_z)
|
||
begin
|
||
if (SOIn==SO_z)
|
||
deq_pin=1'b0;
|
||
else
|
||
deq_pin=1'b1;
|
||
end
|
||
// chech when data is generated from model to avoid setuphold check in
|
||
// those occasion
|
||
assign deg_pin=deq_pin;
|
||
|
||
reg deq_sin;
|
||
always @(SI_in, SIOut_z)
|
||
begin
|
||
if (SI_in==SIOut_z)
|
||
deq_sin=1'b0;
|
||
else
|
||
deq_sin=1'b1;
|
||
end
|
||
// chech when data is generated from model to avoid setuphold check in
|
||
// those occasion
|
||
assign deg_sin=deq_sin;
|
||
|
||
reg deq_holdin;
|
||
always @(HOLDNeg_ipd, HOLDNegOut_zd)
|
||
begin
|
||
if (HOLDNeg_ipd==HOLDNegOut_zd)
|
||
deq_holdin=1'b0;
|
||
else
|
||
deq_holdin=1'b1;
|
||
end
|
||
// check when data is generated from model to avoid setuphold check in
|
||
// this occasion
|
||
assign deg_holdin=deq_holdin;
|
||
|
||
initial
|
||
begin : Init
|
||
|
||
write = 1'b0;
|
||
cfg_write = 1'b0;
|
||
read_out = 1'b0;
|
||
Address = 0;
|
||
change_addr = 1'b0;
|
||
|
||
PDONE = 1'b1;
|
||
PSTART = 1'b0;
|
||
|
||
EDONE = 1'b1;
|
||
ESTART = 1'b0;
|
||
|
||
WDONE = 1'b1;
|
||
WSTART = 1'b0;
|
||
|
||
DP_in = 1'b0;
|
||
DP_out = 1'b0;
|
||
RES_in = 1'b0;
|
||
RES_out = 1'b0;
|
||
Instruct = NONE;
|
||
|
||
bus_cycle_state = STAND_BY;
|
||
current_state = IDLE;
|
||
next_state = IDLE;
|
||
end
|
||
|
||
//CFI
|
||
initial
|
||
begin: InitCFI
|
||
integer i;
|
||
integer j;
|
||
|
||
CFI_array[8'h07] = 8'hFF;
|
||
CFI_array[8'h08] = 8'hFF;
|
||
CFI_array[8'h09] = 8'hFF;
|
||
CFI_array[8'h0A] = 8'hFF;
|
||
CFI_array[8'h0B] = 8'hFF;
|
||
CFI_array[8'h0C] = 8'hFF;
|
||
CFI_array[8'h0D] = 8'hFF;
|
||
CFI_array[8'h0E] = 8'hFF;
|
||
CFI_array[8'h0F] = 8'hFF;
|
||
CFI_array[8'h10] = 8'h51;
|
||
CFI_array[8'h11] = 8'h52;
|
||
CFI_array[8'h12] = 8'h59;
|
||
CFI_array[8'h13] = 8'h02;
|
||
CFI_array[8'h14] = 8'h00;
|
||
CFI_array[8'h15] = 8'h40;
|
||
CFI_array[8'h16] = 8'h00;
|
||
CFI_array[8'h17] = 8'h00;
|
||
CFI_array[8'h18] = 8'h00;
|
||
CFI_array[8'h19] = 8'h00;
|
||
CFI_array[8'h1A] = 8'h00;
|
||
//System interface string
|
||
CFI_array[8'h1B] = 8'h27;
|
||
CFI_array[8'h1C] = 8'h36;
|
||
CFI_array[8'h1D] = 8'h00;
|
||
CFI_array[8'h1E] = 8'h00;
|
||
CFI_array[8'h1F] = 8'h0B;
|
||
CFI_array[8'h20] = 8'h0B;
|
||
CFI_array[8'h21] = 8'h09;
|
||
CFI_array[8'h22] = 8'h10;
|
||
CFI_array[8'h23] = 8'h01;
|
||
CFI_array[8'h24] = 8'h01;
|
||
CFI_array[8'h25] = 8'h02;
|
||
CFI_array[8'h26] = 8'h01;
|
||
//device geometry definition
|
||
CFI_array[8'h27] = 8'h17;
|
||
CFI_array[8'h28] = 8'h05;
|
||
CFI_array[8'h29] = 8'h05;
|
||
CFI_array[8'h2A] = 8'h08;
|
||
CFI_array[8'h2B] = 8'h00;
|
||
CFI_array[8'h2C] = 8'h02;
|
||
CFI_array[8'h2D] = 8'h1F;
|
||
CFI_array[8'h2E] = 8'h00;
|
||
CFI_array[8'h2F] = 8'h10;
|
||
CFI_array[8'h30] = 8'h00;
|
||
CFI_array[8'h31] = 8'h7D;
|
||
CFI_array[8'h32] = 8'h00;
|
||
CFI_array[8'h33] = 8'h00;
|
||
CFI_array[8'h34] = 8'h01;
|
||
CFI_array[8'h35] = 8'h00;
|
||
CFI_array[8'h36] = 8'h00;
|
||
CFI_array[8'h37] = 8'h00;
|
||
CFI_array[8'h38] = 8'h00;
|
||
CFI_array[8'h39] = 8'h00;
|
||
CFI_array[8'h3A] = 8'h00;
|
||
CFI_array[8'h3B] = 8'h00;
|
||
CFI_array[8'h3C] = 8'h00;
|
||
CFI_array[8'h3D] = 8'hFF;
|
||
CFI_array[8'h3E] = 8'hFF;
|
||
CFI_array[8'h3F] = 8'hFF;
|
||
//primary vendor-specific extended query
|
||
CFI_array[8'h40] = 8'h50;
|
||
CFI_array[8'h41] = 8'h52;
|
||
CFI_array[8'h42] = 8'h49;
|
||
CFI_array[8'h43] = 8'h31;
|
||
CFI_array[8'h44] = 8'h33;
|
||
CFI_array[8'h45] = 8'h15;
|
||
CFI_array[8'h46] = 8'h00;
|
||
CFI_array[8'h47] = 8'h02;
|
||
CFI_array[8'h48] = 8'h00;
|
||
CFI_array[8'h49] = 8'h05;
|
||
CFI_array[8'h4A] = 8'h00;
|
||
CFI_array[8'h4B] = 8'h01;
|
||
CFI_array[8'h4C] = 8'h03;
|
||
CFI_array[8'h4D] = 8'h85;
|
||
CFI_array[8'h4E] = 8'h95;
|
||
CFI_array[8'h4F] = 8'h07;
|
||
CFI_array[8'h50] = 8'h00;
|
||
|
||
for(i=73;i>=0;i=i-1)
|
||
begin
|
||
CFI_tmp = CFI_array[8'h07-i+73];
|
||
for(j=7;j>=0;j=j-1)
|
||
begin
|
||
CFI_array_tmp[8*i+j] = CFI_tmp[j];
|
||
end
|
||
end
|
||
end
|
||
|
||
// initialize memory
|
||
initial
|
||
begin: InitMemory
|
||
integer i;
|
||
|
||
for (i=0;i<=AddrRANGE;i=i+1)
|
||
begin
|
||
Mem[i] = MaxData;
|
||
end
|
||
|
||
if ((UserPreload) && !(mem_file_name == "none"))
|
||
begin
|
||
// Memory Preload
|
||
//s25fl064p.mem, memory preload file
|
||
// @aaaaaa - <aaaaaa> stands for address
|
||
// dd - <dd> is byte to be written at Mem(aaaaaa++)
|
||
// (aaaaaa is incremented at every load)
|
||
$readmemh(mem_file_name,Mem);
|
||
end
|
||
|
||
for (i=OTPLoAddr;i<=OTPHiAddr;i=i+1)
|
||
begin
|
||
OTPMem[i] = MaxData;
|
||
end
|
||
if (UserPreload && !(otp_file_name == "none"))
|
||
begin
|
||
//s25fl064p_secsi memory file
|
||
// / - comment
|
||
// @aaaaaa - <aaaaaa> stands for address within last defined
|
||
// sector
|
||
// dd - <dd> is byte to be written at SecSi(aaaaaa++)
|
||
// (aa is incremented at every load)
|
||
// only first 1-5 columns are loaded. NO empty lines !!!!!!!!!!!!!!!!
|
||
$readmemh(otp_file_name,OTPMem);
|
||
end
|
||
PR_LOCK1[15:8] = 16'h0;
|
||
PR_LOCK1[7:0] = OTPMem[256];
|
||
|
||
PR_LOCK2[15:8] = OTPMem[275];
|
||
PR_LOCK2[7:0] = OTPMem[274];
|
||
|
||
PR_LOCK3[15:8] = OTPMem[533];
|
||
PR_LOCK3[7:0] = OTPMem[532];
|
||
end
|
||
|
||
//Power Up time;
|
||
initial
|
||
begin
|
||
PoweredUp = 1'b0;
|
||
#tdevice_PU PoweredUp = 1'b1;
|
||
end
|
||
|
||
always @(posedge DP_in)
|
||
begin:TDPr
|
||
#tdevice_DP DP_out = DP_in;
|
||
end
|
||
always @(negedge DP_in)
|
||
begin:TDPf
|
||
#1 DP_out = DP_in;
|
||
end
|
||
|
||
always @(posedge RES_in)
|
||
begin:TRESr
|
||
#tdevice_RES RES_out = RES_in;
|
||
end
|
||
always @(negedge RES_in)
|
||
begin:TRESf
|
||
#1 RES_out = RES_in;
|
||
end
|
||
|
||
always @(next_state or PoweredUp)
|
||
begin: StateTransition
|
||
if (PoweredUp)
|
||
begin
|
||
current_state = next_state;
|
||
end
|
||
end
|
||
|
||
always @(negedge CSNeg_ipd)
|
||
begin:CheckCSOnPowerUP
|
||
if (~PoweredUp)
|
||
$display ("Device is selected during Power Up");
|
||
end
|
||
|
||
// ///////////////////////////////////////////////////////////////////////////
|
||
// // Instruction cycle decode
|
||
// ///////////////////////////////////////////////////////////////////////////
|
||
integer data_cnt = 0;
|
||
integer addr_cnt = 0;
|
||
integer code_cnt = 0;
|
||
integer mode_cnt = 0;
|
||
integer dummy_cnt = 0;
|
||
integer bit_cnt = 0;
|
||
|
||
reg[2047:0] Data_in = 2048'b0;
|
||
integer quad_data_in [0:511];
|
||
reg[3:0] quad_nybble = 4'b0;
|
||
reg[3:0] Quad_slv = 4'b0;
|
||
reg[7:0] code = 8'b0;
|
||
reg[7:0] code_in = 8'b0;
|
||
reg[7:0] Byte_slv = 8'b0;
|
||
reg[HiAddrBit:0] addr_bytes;
|
||
reg[23:0] Address_in = 8'b0;
|
||
reg[7:0] mode_bytes;
|
||
reg[7:0] mode_in;
|
||
|
||
reg rising_edge_CSNeg_ipd = 1'b0;
|
||
reg falling_edge_CSNeg_ipd = 1'b0;
|
||
reg rising_edge_SCK_ipd = 1'b0;
|
||
reg falling_edge_SCK_ipd = 1'b0;
|
||
|
||
always @(falling_edge_CSNeg_ipd or rising_edge_CSNeg_ipd
|
||
or rising_edge_SCK_ipd or falling_edge_SCK_ipd)
|
||
begin: Buscycle1
|
||
integer i;
|
||
integer j;
|
||
integer k;
|
||
if (falling_edge_CSNeg_ipd)
|
||
begin
|
||
if (bus_cycle_state==STAND_BY)
|
||
begin
|
||
bus_cycle_state = CODE_BYTE;
|
||
Instruct = NONE;
|
||
write = 1'b1;
|
||
code_cnt = 0;
|
||
addr_cnt = 0;
|
||
data_cnt = 0;
|
||
mode_cnt = 0;
|
||
dummy_cnt = 0;
|
||
end
|
||
end
|
||
|
||
if (rising_edge_SCK_ipd)
|
||
begin
|
||
if (~CSNeg_ipd)
|
||
begin
|
||
case (bus_cycle_state)
|
||
CODE_BYTE :
|
||
begin
|
||
if ((HOLDNeg_in && ~QUAD) || QUAD)
|
||
begin
|
||
code_in[code_cnt] = SI_in;
|
||
code_cnt = code_cnt + 1;
|
||
if (code_cnt == BYTE)
|
||
begin
|
||
for (i=0;i<=7;i=i+1)
|
||
begin
|
||
code[i] = code_in[7-i];
|
||
end
|
||
case(code)
|
||
8'b00000110 :
|
||
begin
|
||
Instruct = WREN;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b00000100 :
|
||
begin
|
||
Instruct = WRDI;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b00000001 :
|
||
begin
|
||
Instruct = WRR;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b00000101 :
|
||
begin
|
||
Instruct = RDSR;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b00000011 :
|
||
begin
|
||
Instruct = READ;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b00001011 :
|
||
begin
|
||
Instruct = FAST_READ;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b10011111 :
|
||
begin
|
||
Instruct = RDID;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b10010000 :
|
||
begin
|
||
Instruct = READ_ID;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b10101011 :
|
||
begin
|
||
Instruct = RES_READ_ES;
|
||
bus_cycle_state = DUMMY_BYTES;
|
||
end
|
||
8'b11011000 :
|
||
begin
|
||
Instruct = SE;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b11000111 , 8'b01100000:
|
||
begin
|
||
Instruct = BE;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b00000010 :
|
||
begin
|
||
Instruct = PP;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b00110010 :
|
||
begin
|
||
Instruct = QPP;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b10111001 :
|
||
begin
|
||
Instruct = DP;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b00110000 :
|
||
begin
|
||
Instruct = CLSR;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b00110101 :
|
||
begin
|
||
Instruct = RCR;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
8'b00100000 :
|
||
begin
|
||
Instruct = P4E;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b01000000 :
|
||
begin
|
||
Instruct = P8E;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b01000010 :
|
||
begin
|
||
Instruct = OTPP;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b01001011 :
|
||
begin
|
||
Instruct = OTPR;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b00111011 :
|
||
begin
|
||
Instruct = DUAL_READ;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b01101011 :
|
||
begin
|
||
Instruct = QUAD_READ;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b10111011 :
|
||
begin
|
||
Instruct = DH_READ;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
8'b11101011 :
|
||
begin
|
||
Instruct = QH_READ;
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
end
|
||
endcase
|
||
end
|
||
end
|
||
end
|
||
|
||
ADDRESS_BYTES :
|
||
begin
|
||
if (((Instruct == FAST_READ || Instruct == OTPR ||
|
||
Instruct == DUAL_READ) &&
|
||
((HOLDNeg_in && ~QUAD) || QUAD)) ||
|
||
((Instruct == QUAD_READ) && QUAD))
|
||
begin
|
||
Address_in[addr_cnt] = SI_in;
|
||
addr_cnt = addr_cnt + 1;
|
||
if (addr_cnt == 3*BYTE)
|
||
begin
|
||
for (i=23;i>=23-HiAddrBit;i=i-1)
|
||
begin
|
||
addr_bytes[23-i] = Address_in[i];
|
||
end
|
||
Address = addr_bytes;
|
||
change_addr = 1'b1;
|
||
#1 change_addr = 1'b0;
|
||
bus_cycle_state = DUMMY_BYTES;
|
||
end
|
||
end
|
||
else if (Instruct == DH_READ &&
|
||
((HOLDNeg_in && ~QUAD) || QUAD))
|
||
begin
|
||
if (SOIn !== 1'b0 && SOIn !== 1'b1)
|
||
begin
|
||
mpm_mode = 0;
|
||
bus_cycle_state = STAND_BY;
|
||
end
|
||
else
|
||
begin
|
||
Address_in[2*addr_cnt] = SOIn;
|
||
Address_in[2*addr_cnt+1] = SI_in;
|
||
read_cnt = 0;
|
||
addr_cnt = addr_cnt + 1;
|
||
if (addr_cnt == 12)
|
||
begin
|
||
addr_cnt = 0;
|
||
for (i=23;i>=23-HiAddrBit;i=i-1)
|
||
begin
|
||
addr_bytes[23-i] = Address_in[i];
|
||
end
|
||
Address = addr_bytes;
|
||
change_addr = 1'b1;
|
||
#1 change_addr = 1'b0;
|
||
bus_cycle_state = MODE_BYTE;
|
||
end
|
||
end
|
||
end
|
||
else if (Instruct == QH_READ)
|
||
begin
|
||
if(QUAD)
|
||
begin
|
||
if (SOIn !== 1'b0 && SOIn !== 1'b1)
|
||
begin
|
||
mpm_mode = 0;
|
||
bus_cycle_state = STAND_BY;
|
||
end
|
||
else
|
||
begin
|
||
Address_in[4*addr_cnt] = HOLDNeg_in;
|
||
Address_in[4*addr_cnt+1] = WPNeg_in;
|
||
Address_in[4*addr_cnt+2] = SOIn;
|
||
Address_in[4*addr_cnt+3] = SI_in;
|
||
read_cnt = 0;
|
||
addr_cnt = addr_cnt + 1;
|
||
if (addr_cnt == 6)
|
||
begin
|
||
addr_cnt = 0;
|
||
for (i=23;i>=23-HiAddrBit;i=i-1)
|
||
begin
|
||
addr_bytes[23-i] = Address_in[i];
|
||
end
|
||
Address = addr_bytes;
|
||
change_addr = 1'b1;
|
||
#1 change_addr = 1'b0;
|
||
bus_cycle_state = MODE_BYTE;
|
||
end
|
||
end
|
||
end
|
||
else
|
||
begin
|
||
bus_cycle_state = STAND_BY;
|
||
end
|
||
end
|
||
else if ((HOLDNeg_in && ~QUAD) || QUAD)
|
||
begin
|
||
Address_in[addr_cnt] = SI_in;
|
||
addr_cnt = addr_cnt + 1;
|
||
if (addr_cnt == 3*BYTE)
|
||
begin
|
||
for (i=23;i>=23-HiAddrBit;i=i-1)
|
||
begin
|
||
addr_bytes[23-i] = Address_in[i];
|
||
end
|
||
Address = addr_bytes;
|
||
change_addr = 1'b1;
|
||
#1 change_addr = 1'b0;
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
end
|
||
end
|
||
|
||
MODE_BYTE :
|
||
begin
|
||
if((Instruct == DH_READ) &&
|
||
((HOLDNeg_in && ~QUAD) || QUAD))
|
||
begin
|
||
mode_in[2*mode_cnt] = SOIn;
|
||
mode_in[2*mode_cnt+1] = SI_in;
|
||
mode_cnt = mode_cnt + 1;
|
||
if (mode_cnt == BYTE/2)
|
||
begin
|
||
mode_cnt = 0;
|
||
for (i=7;i>=7-BYTE;i=i-1)
|
||
begin
|
||
mode_bytes[i] = mode_in[7-i];
|
||
end
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
end
|
||
else if((Instruct == QH_READ) && QUAD)
|
||
begin
|
||
mode_in[4*mode_cnt] = HOLDNeg_in;
|
||
mode_in[4*mode_cnt+1] = WPNeg_in;
|
||
mode_in[4*mode_cnt+2] = SOIn;
|
||
mode_in[4*mode_cnt+3] = SI_in;
|
||
mode_cnt = mode_cnt + 1;
|
||
if (mode_cnt == BYTE/4)
|
||
begin
|
||
mode_cnt = 0;
|
||
for (i=7;i>=7-BYTE;i=i-1)
|
||
begin
|
||
mode_bytes[i] = mode_in[7-i];
|
||
end
|
||
bus_cycle_state = DUMMY_BYTES;
|
||
end
|
||
end
|
||
dummy_cnt = 0;
|
||
end
|
||
|
||
DUMMY_BYTES :
|
||
begin
|
||
if(QUAD && (Instruct == QUAD_READ ||
|
||
Instruct == QH_READ))
|
||
begin
|
||
dummy_cnt = dummy_cnt + 1;
|
||
if ((dummy_cnt == BYTE) && Instruct == QUAD_READ)
|
||
bus_cycle_state = DATA_BYTES;
|
||
else if ((dummy_cnt == BYTE/2) &&
|
||
Instruct == QH_READ)
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
else if((HOLDNeg_in && ~QUAD) || QUAD)
|
||
begin
|
||
dummy_cnt = dummy_cnt + 1;
|
||
if (dummy_cnt == BYTE && (Instruct == FAST_READ ||
|
||
Instruct == OTPR || Instruct == DUAL_READ))
|
||
bus_cycle_state = DATA_BYTES;
|
||
else if (dummy_cnt == 3*BYTE)
|
||
bus_cycle_state = DATA_BYTES;
|
||
end
|
||
end
|
||
|
||
DATA_BYTES :
|
||
begin
|
||
if(QUAD && Instruct == QPP)
|
||
begin
|
||
quad_nybble = {HOLDNeg_in, WPNeg_in, SOIn, SI_in};
|
||
if (data_cnt > 511)
|
||
begin
|
||
//In case of quad mode and QPP,
|
||
//if more than 512 bytes are sent to the device
|
||
for (i=0;i<=510;i=i+1)
|
||
begin
|
||
quad_data_in[i] = quad_data_in[i+1];
|
||
end
|
||
quad_data_in[511] = quad_nybble;
|
||
data_cnt = data_cnt + 1;
|
||
end
|
||
else
|
||
begin
|
||
if( quad_nybble !== 4'bZZZZ)
|
||
begin
|
||
quad_data_in[data_cnt] = quad_nybble;
|
||
end
|
||
data_cnt = data_cnt + 1;
|
||
end
|
||
end
|
||
else if ((HOLDNeg_in && ~QUAD) || QUAD)
|
||
begin
|
||
if (data_cnt > 2047)
|
||
//In case of serial mode and PP, if more than 256
|
||
//bytes are sent to the device
|
||
begin
|
||
if (bit_cnt == 0)
|
||
begin
|
||
for (i=0;i<=(255*BYTE-1);i=i+1)
|
||
begin
|
||
Data_in[i] = Data_in[i+8];
|
||
end
|
||
end
|
||
Data_in[2040 + bit_cnt] = SI_in;
|
||
bit_cnt = bit_cnt + 1;
|
||
if (bit_cnt == 8)
|
||
begin
|
||
bit_cnt = 0;
|
||
end
|
||
data_cnt = data_cnt + 1;
|
||
end
|
||
else
|
||
begin
|
||
Data_in[data_cnt] = SI_in;
|
||
data_cnt = data_cnt + 1;
|
||
bit_cnt = 0;
|
||
end
|
||
end
|
||
end
|
||
endcase
|
||
end
|
||
end
|
||
if (falling_edge_SCK_ipd)
|
||
begin
|
||
if ((bus_cycle_state == DATA_BYTES) && (~CSNeg_ipd))
|
||
begin
|
||
if (((Instruct == READ || Instruct == FAST_READ ||
|
||
Instruct == DUAL_READ || Instruct == DH_READ ||
|
||
Instruct == RES_READ_ES || Instruct == RDID ||
|
||
Instruct == RDSR || Instruct == READ_ID ||
|
||
Instruct == RCR || Instruct == OTPR) &&
|
||
((HOLDNeg_in && ~QUAD) || QUAD)) ||
|
||
((Instruct == QUAD_READ || Instruct == QH_READ) && QUAD))
|
||
begin
|
||
read_out = 1'b1;
|
||
#1 read_out = 1'b0;
|
||
end
|
||
end
|
||
end
|
||
if (rising_edge_CSNeg_ipd)
|
||
begin
|
||
if ((bus_cycle_state != DATA_BYTES) &&
|
||
(bus_cycle_state != DUMMY_BYTES))
|
||
bus_cycle_state = STAND_BY;
|
||
else
|
||
begin
|
||
if (bus_cycle_state == DATA_BYTES)
|
||
begin
|
||
if (mpm_mode && (mode_bytes[7:4] == 4'b1010) &&
|
||
(Instruct == DH_READ || Instruct == QH_READ))
|
||
bus_cycle_state = ADDRESS_BYTES;
|
||
else
|
||
begin
|
||
mpm_mode = 0;
|
||
bus_cycle_state = STAND_BY;
|
||
end
|
||
if (Instruct == QPP)
|
||
begin
|
||
if (data_cnt > 0)
|
||
begin
|
||
if ((data_cnt % 2) == 0)
|
||
begin
|
||
write = 0;
|
||
for(i=0;i<=255;i=i+1)
|
||
begin
|
||
for(j=1;j>=0;j=j-1)
|
||
begin
|
||
Quad_slv = quad_data_in[(i*2)+(1-j)];
|
||
for(k=3;k>=0;k=k-1)
|
||
begin
|
||
Byte_slv[4*j+k] = Quad_slv[k];
|
||
end
|
||
end
|
||
WByte[i] = Byte_slv;
|
||
end
|
||
if (data_cnt > 512)
|
||
Byte_number = 255;
|
||
else
|
||
Byte_number = data_cnt/2 -1;
|
||
end
|
||
end
|
||
end
|
||
if ((HOLDNeg_in && ~QUAD) || QUAD)
|
||
begin
|
||
case (Instruct)
|
||
WRDI,
|
||
WREN,
|
||
DP,
|
||
BE,
|
||
SE,
|
||
P4E,
|
||
P8E,
|
||
CLSR:
|
||
begin
|
||
if (data_cnt == 0)
|
||
write = 1'b0;
|
||
end
|
||
|
||
RES_READ_ES:
|
||
begin
|
||
write = 1'b0;
|
||
end
|
||
|
||
WRR :
|
||
begin
|
||
if((HOLDNeg_in && ~QUAD) || QUAD)
|
||
begin
|
||
if (data_cnt == 8)
|
||
begin
|
||
write = 0;
|
||
cfg_write = 1'b0;
|
||
for(i=0;i<=7;i=i+1)
|
||
begin
|
||
Status_reg_in[i]=
|
||
Data_in[7-i];
|
||
end
|
||
end
|
||
else if (data_cnt == 16)
|
||
begin
|
||
write = 0;
|
||
cfg_write = 1'b1;
|
||
for(i=0;i<=7;i=i+1)
|
||
begin
|
||
Status_reg_in[i]=
|
||
Data_in[7-i];
|
||
Sec_conf_reg_in[i]=
|
||
Data_in[15-i];
|
||
end
|
||
end
|
||
end
|
||
end
|
||
|
||
PP :
|
||
begin
|
||
if (data_cnt > 0)
|
||
begin
|
||
if ((data_cnt % 8) == 0)
|
||
begin
|
||
write = 1'b0;
|
||
for (i=0;i<=255;i=i+1)
|
||
begin
|
||
for (j=7;j>=0;j=j-1)
|
||
begin
|
||
Byte_slv[j] =
|
||
Data_in[(i*8) + (7-j)];
|
||
end
|
||
WByte[i] = Byte_slv;
|
||
end
|
||
if (data_cnt > 256*BYTE)
|
||
Byte_number = 255;
|
||
else
|
||
Byte_number = ((data_cnt/8) - 1);
|
||
end
|
||
end
|
||
end
|
||
|
||
OTPP :
|
||
begin
|
||
if (data_cnt == 8)
|
||
begin
|
||
write = 1'b0;
|
||
for (j=7;j>=0;j=j-1)
|
||
begin
|
||
Byte_slv[j] = Data_in[7-j];
|
||
end
|
||
WOTPByte = Byte_slv;
|
||
end
|
||
end
|
||
endcase
|
||
end
|
||
end
|
||
else
|
||
if (bus_cycle_state == DUMMY_BYTES)
|
||
begin
|
||
bus_cycle_state = STAND_BY;
|
||
if (((HOLDNeg_in && ~QUAD) || QUAD) &&
|
||
(Instruct == RES_READ_ES) && (dummy_cnt == 0))
|
||
write = 1'b0;
|
||
end
|
||
end
|
||
end
|
||
end
|
||
|
||
// /////////////////////////////////////////////////////////////////////////
|
||
// // Timing control for the Program Operations
|
||
// // start
|
||
// /////////////////////////////////////////////////////////////////////////
|
||
|
||
event pdone_event;
|
||
|
||
always @(PSTART)
|
||
begin
|
||
if (PSTART && PDONE)
|
||
if (Sec_Prot[SA] == 1'b0)
|
||
begin
|
||
PDONE = 1'b0;
|
||
->pdone_event;
|
||
end
|
||
end
|
||
|
||
always @(pdone_event)
|
||
begin:pdone_process
|
||
PDONE = 1'b0;
|
||
#tdevice_PP PDONE = 1'b1;
|
||
end
|
||
|
||
// /////////////////////////////////////////////////////////////////////////
|
||
// // Timing control for the Write Status Register Operation
|
||
// // start
|
||
// /////////////////////////////////////////////////////////////////////////
|
||
|
||
event wdone_event;
|
||
|
||
always @(WSTART)
|
||
begin
|
||
if (WSTART && WDONE)
|
||
begin
|
||
WDONE = 1'b0;
|
||
->wdone_event;
|
||
end
|
||
end
|
||
|
||
always @(wdone_event)
|
||
begin:wdone_process
|
||
WDONE = 1'b0;
|
||
#tdevice_WR WDONE = 1'b1;
|
||
end
|
||
|
||
// /////////////////////////////////////////////////////////////////////////
|
||
// // Timing control for the Erase Operations
|
||
// /////////////////////////////////////////////////////////////////////////
|
||
time duration_erase;
|
||
|
||
event edone_event;
|
||
|
||
always @(ESTART)
|
||
begin: erase
|
||
if (ESTART && EDONE)
|
||
begin
|
||
if (Instruct == BE)
|
||
begin
|
||
duration_erase = tdevice_BE;
|
||
end
|
||
else if (Instruct == P4E || Instruct == P8E)
|
||
begin
|
||
duration_erase = tdevice_PE;
|
||
end
|
||
else
|
||
begin
|
||
duration_erase = tdevice_SE;
|
||
end
|
||
|
||
EDONE = 1'b0;
|
||
->edone_event;
|
||
end
|
||
end
|
||
|
||
always @(edone_event)
|
||
begin : edone_process
|
||
EDONE = 1'b0;
|
||
#duration_erase EDONE = 1'b1;
|
||
end
|
||
// /////////////////////////////////////////////////////////////////////////
|
||
// // Main Behavior Process
|
||
// // combinational process for next state generation
|
||
// /////////////////////////////////////////////////////////////////////////
|
||
|
||
reg rising_edge_PDONE = 1'b0;
|
||
reg rising_edge_EDONE = 1'b0;
|
||
reg rising_edge_WDONE = 1'b0;
|
||
reg rising_edge_DP_out = 1'b0;
|
||
reg falling_edge_write = 1'b0;
|
||
integer i;
|
||
integer j;
|
||
|
||
always @(falling_edge_write or rising_edge_PDONE or rising_edge_WDONE
|
||
or rising_edge_EDONE or rising_edge_DP_out)
|
||
begin: StateGen1
|
||
if (falling_edge_write)
|
||
begin
|
||
case (current_state)
|
||
IDLE :
|
||
begin
|
||
if (~write)
|
||
begin
|
||
if ((Instruct == WRR) && WEL)
|
||
begin
|
||
if (~(Status_reg[7] && ~WPNeg_in && ~QUAD))
|
||
//HPM is disabled when the Quad I/O Mode is enabled
|
||
//(Quad bit = 1 in the Configuration Register)
|
||
next_state = WRITE_SR;
|
||
end
|
||
|
||
else if ((Instruct == PP || Instruct == QPP) &&
|
||
WEL)
|
||
begin
|
||
sect = Address / 24'h10000;
|
||
if (Sec_Prot[sect] == 1'b0)
|
||
next_state = PAGE_PG;
|
||
end
|
||
|
||
else if (Instruct == OTPP && WEL)
|
||
begin
|
||
if(Address == 256 || Address == 257 ||
|
||
((Address >= 258 && Address <= 273) &&
|
||
PR_LOCK1[(Address-258)/8] == 1'b1)
|
||
|| Address == 274
|
||
|| Address == 275 || ((Address >= 276 &&
|
||
Address <= 531) && PR_LOCK2[(Address-276)/16]
|
||
==1'b1) || Address == 532 || Address == 533 ||
|
||
((Address >= 534 && Address <= 767)
|
||
&& PR_LOCK3[(Address-534)/16] == 1'b1))
|
||
next_state = OTP_PG;
|
||
end
|
||
|
||
else if (Instruct == SE && WEL)
|
||
begin
|
||
sect = Address / 24'h10000;
|
||
if (Sec_Prot[sect] == 1'b0)
|
||
next_state = SECTOR_ER;
|
||
end
|
||
|
||
else if (Instruct == P4E && WEL)
|
||
begin
|
||
sect = Address / 24'h10000;
|
||
if (Sec_Prot[sect] == 1'b0 && (((sect == 0 ||
|
||
sect == 1) && ~TBPARM) || ((sect == SecNum ||
|
||
sect == SecNum-1) && TBPARM)))
|
||
next_state = P4_ER;
|
||
end
|
||
|
||
else if (Instruct == P8E && WEL)
|
||
begin
|
||
sect = Address / 24'h10000;
|
||
if (Sec_Prot[sect] == 1'b0 && (((sect == 0 ||
|
||
sect == 1) && ~TBPARM) || ((sect == SecNum ||
|
||
sect == SecNum-1) && TBPARM)))
|
||
next_state = P8_ER;
|
||
end
|
||
|
||
else if (Instruct == BE && WEL)
|
||
begin
|
||
if (Status_reg[2]==1'b0 && Status_reg[3]==1'b0 &&
|
||
Status_reg[4]==1'b0)
|
||
next_state = BULK_ER;
|
||
end
|
||
else if (Instruct == DP)
|
||
next_state = DP_DOWN_WAIT;
|
||
else
|
||
next_state = IDLE;
|
||
end
|
||
end
|
||
|
||
DP_DOWN :
|
||
begin
|
||
if (~write)
|
||
begin
|
||
if (Instruct == RES_READ_ES)
|
||
next_state = IDLE;
|
||
end
|
||
end
|
||
|
||
endcase
|
||
end
|
||
|
||
if (rising_edge_PDONE)
|
||
begin
|
||
if (current_state==PAGE_PG || current_state==OTP_PG)
|
||
begin
|
||
next_state = IDLE;
|
||
end
|
||
end
|
||
|
||
if (rising_edge_WDONE)
|
||
begin
|
||
if (current_state==WRITE_SR)
|
||
begin
|
||
next_state = IDLE;
|
||
end
|
||
end
|
||
|
||
if (rising_edge_EDONE)
|
||
begin
|
||
if (current_state==SECTOR_ER || current_state==BULK_ER
|
||
|| current_state==P4_ER || current_state==P8_ER)
|
||
begin
|
||
next_state = IDLE;
|
||
end
|
||
end
|
||
|
||
if (rising_edge_DP_out)
|
||
begin
|
||
if (current_state==DP_DOWN_WAIT)
|
||
next_state = DP_DOWN;
|
||
end
|
||
|
||
end
|
||
|
||
///////////////////////////////////////////////////////////////////////////
|
||
//FSM Output generation and general functionality
|
||
///////////////////////////////////////////////////////////////////////////
|
||
reg rising_edge_read_out = 1'b0;
|
||
reg rising_edge_RES_out = 1'b0;
|
||
reg Instruct_event = 1'b0;
|
||
reg change_addr_event = 1'b0;
|
||
reg rising_edge_powered = 1'b0;
|
||
reg current_state_event = 1'b0;
|
||
|
||
integer WData [0:255];
|
||
integer WOTPData;
|
||
integer Addr;
|
||
integer Addr_tmp;
|
||
|
||
always @(oe_event)
|
||
begin
|
||
oe = 1'b1;
|
||
#1 oe = 1'b0;
|
||
end
|
||
|
||
always @(rising_edge_read_out or Instruct_event or
|
||
change_addr_event or oe or current_state_event or
|
||
falling_edge_write or EDONE or WDONE or PDONE or
|
||
CSNeg_ipd or rising_edge_RES_out or rising_edge_powered or
|
||
rising_edge_DP_out)
|
||
begin: Functionality
|
||
integer i,j;
|
||
|
||
if (rising_edge_read_out)
|
||
begin
|
||
if (PoweredUp == 1'b1)
|
||
->oe_event;
|
||
end
|
||
|
||
if (Instruct_event)
|
||
begin
|
||
read_cnt = 0;
|
||
rd_fast = 1'b1;
|
||
rd_slow = 1'b0;
|
||
rd_jedec = 1'b0;
|
||
dual = 1'b0;
|
||
if (current_state == DP_DOWN_WAIT)
|
||
begin
|
||
if (DP_in == 1'b1)
|
||
begin
|
||
$display ("Command results can be corrupted");
|
||
end
|
||
end
|
||
if (Instruct == DH_READ || Instruct == QH_READ)
|
||
begin
|
||
mpm_mode = 1;
|
||
end
|
||
end
|
||
|
||
if (rising_edge_powered)
|
||
begin
|
||
//The Configuration Register FREEZE bit is cleared.
|
||
Sec_conf_reg[0] = 1'b0;
|
||
|
||
//The WEL bit resets (disables writes) on power-up
|
||
Status_reg[1] = 1'b0;
|
||
|
||
if (BPNV == 1)
|
||
begin
|
||
//When BPNV is set to ‘1’,the BP2-0 bits in the Status Register
|
||
//are volatile and will be reset to binary 111 after power on reset.
|
||
Status_reg[4] = 1'b1;// BP2
|
||
Status_reg[3] = 1'b1;// BP1
|
||
Status_reg[2] = 1'b1;// BP0
|
||
change_BP = 1'b1;
|
||
#1 change_BP = 1'b0;
|
||
end
|
||
end
|
||
|
||
if (change_addr_event)
|
||
begin
|
||
read_addr = Address;
|
||
end
|
||
|
||
if (oe || current_state_event)
|
||
begin
|
||
case (current_state)
|
||
IDLE :
|
||
begin
|
||
if (oe && ~RES_in)
|
||
begin
|
||
if (Instruct == RDSR)
|
||
begin
|
||
//Read Status Register
|
||
SOut_zd = Status_reg[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
read_cnt = 0;
|
||
end
|
||
if (Instruct == RCR)
|
||
begin
|
||
//Read Security Conf. Register
|
||
SOut_zd = Sec_conf_reg[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
read_cnt = 0;
|
||
end
|
||
else if (Instruct == READ || Instruct == FAST_READ)
|
||
begin
|
||
//Read Memory array
|
||
if (Instruct == READ)
|
||
begin
|
||
rd_fast = 1'b0;
|
||
rd_jedec = 1'b0;
|
||
rd_slow = 1'b1;
|
||
end
|
||
data_out[7:0] = Mem[read_addr];
|
||
SOut_zd = data_out[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
begin
|
||
read_cnt = 0;
|
||
if (read_addr == AddrRANGE)
|
||
read_addr = 0;
|
||
else
|
||
read_addr = read_addr + 1;
|
||
end
|
||
end
|
||
else if (Instruct == DUAL_READ || Instruct == DH_READ)
|
||
begin
|
||
//Read Memory array
|
||
rd_fast = 1'b0;
|
||
rd_slow = 1'b0;
|
||
rd_jedec = 1'b0;
|
||
dual = 1'b1;
|
||
data_out[7:0] = Mem[read_addr];
|
||
SOut_zd = data_out[7-2*read_cnt];
|
||
SIOut_zd = data_out[6-2*read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 4)
|
||
begin
|
||
read_cnt = 0;
|
||
if (read_addr == AddrRANGE)
|
||
read_addr = 0;
|
||
else
|
||
read_addr = read_addr + 1;
|
||
end
|
||
end
|
||
else if (Instruct == QUAD_READ || Instruct == QH_READ)
|
||
begin
|
||
//Read Memory array
|
||
rd_fast = 1'b0;
|
||
rd_slow = 1'b0;
|
||
rd_jedec = 1'b0;
|
||
dual = 1'b1;
|
||
data_out[7:0] = Mem[read_addr];
|
||
HOLDNegOut_zd = data_out[7-4*read_cnt];
|
||
WPNegOut_zd = data_out[6-4*read_cnt];
|
||
SOut_zd = data_out[5-4*read_cnt];
|
||
SIOut_zd = data_out[4-4*read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 2)
|
||
begin
|
||
read_cnt = 0;
|
||
if (read_addr == AddrRANGE)
|
||
read_addr = 0;
|
||
else
|
||
read_addr = read_addr + 1;
|
||
end
|
||
end
|
||
else if (Instruct == OTPR)
|
||
begin
|
||
if(read_addr>=OTPLoAddr && read_addr<=OTPHiAddr)
|
||
begin
|
||
//Read OTP Memory array
|
||
rd_fast = 1'b1;
|
||
rd_slow = 1'b0;
|
||
rd_jedec = 1'b0;
|
||
dual = 1'b0;
|
||
data_out = OTPMem[read_addr];
|
||
SOut_zd = data_out[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
begin
|
||
read_cnt = 0;
|
||
read_addr = read_addr + 1;
|
||
end
|
||
end
|
||
else
|
||
begin
|
||
//OTP Read operation will not wrap to the
|
||
//starting address after the OTP address is at
|
||
//its maximum;
|
||
//instead, the data will be indeterminate.
|
||
SOut_zd = 1'bX;
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
read_cnt = 0;
|
||
end
|
||
end
|
||
else if (Instruct == RDID)
|
||
begin
|
||
// Read ID
|
||
rd_fast = 1'b0;
|
||
rd_slow = 1'b0;
|
||
rd_jedec = 1'b1;
|
||
dual = 1'b0;
|
||
ident_out = {Manuf_ID,DeviceID,ExtendedBytes,
|
||
ReservedBytes,ReservedBytes,
|
||
ReservedBytes,CFI_array_tmp};
|
||
SOut_zd = ident_out[647-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 648)
|
||
read_cnt = 0;
|
||
end
|
||
else if (Instruct == READ_ID)
|
||
begin
|
||
// --Read Manufacturer and Device ID
|
||
if (read_addr % 2 == 0)
|
||
begin
|
||
data_out[7:0] = Manuf_ID;
|
||
SOut_zd = data_out[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
begin
|
||
read_cnt = 0;
|
||
read_addr = read_addr + 1;
|
||
end
|
||
end
|
||
else if (read_addr % 2 == 1)
|
||
begin
|
||
data_out[7:0] = ES;
|
||
SOut_zd = data_out[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
begin
|
||
read_cnt = 0;
|
||
read_addr = 0;
|
||
end
|
||
end
|
||
end
|
||
end
|
||
else if (oe && RES_in)
|
||
begin
|
||
$display ("Command results can be corrupted");
|
||
SOut_zd = 1'bX;
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
read_cnt = 0;
|
||
end
|
||
end
|
||
|
||
WRITE_SR,
|
||
SECTOR_ER,
|
||
BULK_ER,
|
||
P4_ER,
|
||
P8_ER,
|
||
OTP_PG,
|
||
PAGE_PG :
|
||
begin
|
||
if (oe && Instruct == RDSR)
|
||
begin
|
||
//Read Status Register
|
||
SOut_zd = Status_reg[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
read_cnt = 0;
|
||
end
|
||
if (oe && Instruct == RCR)
|
||
begin
|
||
//Read Security Conf. Register
|
||
SOut_zd = Sec_conf_reg[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
read_cnt = 0;
|
||
end
|
||
end
|
||
DP_DOWN :
|
||
begin
|
||
if (oe && Instruct == RES_READ_ES)
|
||
begin
|
||
// Read ID
|
||
data_out[7:0] = ES;
|
||
SOut_zd = data_out[7-read_cnt];
|
||
read_cnt = read_cnt + 1;
|
||
if (read_cnt == 8)
|
||
read_cnt = 0;
|
||
end
|
||
end
|
||
|
||
endcase
|
||
end
|
||
|
||
if (falling_edge_write)
|
||
begin
|
||
case (current_state)
|
||
IDLE :
|
||
begin
|
||
if (~write)
|
||
begin
|
||
if (RES_in == 1'b1 && Instruct != DP)
|
||
begin
|
||
$display ("Command results can be corrupted");
|
||
end
|
||
if (Instruct == WREN)
|
||
Status_reg[1] = 1'b1;
|
||
else if (Instruct == WRDI)
|
||
Status_reg[1] = 1'b0;
|
||
else if (Instruct == WRR && WEL)
|
||
begin
|
||
if (~(Status_reg[7] && ~WPNeg_in && ~QUAD))
|
||
begin
|
||
WSTART = 1'b1;
|
||
WSTART <= #1 1'b0;
|
||
Status_reg[0] = 1'b1;
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[1] = 0;
|
||
end
|
||
end
|
||
else if ((Instruct == PP || Instruct == QPP) &&
|
||
WEL)
|
||
begin
|
||
sect = Address / 24'h10000;
|
||
if (Sec_Prot[sect] == 1'b0)
|
||
begin
|
||
PSTART = 1'b1;
|
||
PSTART <= #1 1'b0;
|
||
initial_config = 1;
|
||
Status_reg[0] = 1'b1; //WIP
|
||
Addr = Address;
|
||
Addr_tmp = Address;
|
||
SA = sect;
|
||
wr_cnt = Byte_number;
|
||
for (i=0;i<=wr_cnt;i=i+1)
|
||
begin
|
||
if (Viol != 1'b0)
|
||
WData[i] = -1;
|
||
else
|
||
WData[i] = WByte[i];
|
||
end
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
end
|
||
else if (Instruct == OTPP && WEL)
|
||
begin
|
||
if(Address == 256 || Address == 257 ||
|
||
((Address >= 258 && Address <= 273) &&
|
||
PR_LOCK1[(Address-258)/8] == 1'b1)
|
||
|| Address == 274
|
||
|| Address == 275 || ((Address >= 276 &&
|
||
Address <= 531) && PR_LOCK2[(Address-276)/16]
|
||
==1'b1) || Address == 532 || Address == 533 ||
|
||
((Address >= 534 && Address <= 767)
|
||
&& PR_LOCK3[(Address-534)/16] == 1'b1))
|
||
begin
|
||
PSTART = 1'b1;
|
||
PSTART <= #1 1'b0;
|
||
Status_reg[0] = 1'b1; //WIP
|
||
Addr = Address;
|
||
if (Viol != 1'b0 )
|
||
WOTPData = -1;
|
||
else
|
||
WOTPData = WOTPByte;
|
||
end
|
||
else if (Address < 100 || Address > 767 )
|
||
begin
|
||
Status_reg[6] = 1'b1;
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
end
|
||
else if (Instruct == SE && WEL)
|
||
begin
|
||
sect = Address / 24'h10000;
|
||
if (Sec_Prot[sect] == 1'b0)
|
||
begin
|
||
ESTART = 1'b1;
|
||
ESTART <= #1 1'b0;
|
||
initial_config = 1;
|
||
Status_reg[0] = 1'b1;
|
||
Addr = Address;
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
end
|
||
else if (Instruct == BE && WEL)
|
||
begin
|
||
if(Status_reg[2]==1'b0 && Status_reg[3]==1'b0 &&
|
||
Status_reg[4]==1'b0)
|
||
begin
|
||
ESTART = 1'b1;
|
||
ESTART <= #1 1'b0;
|
||
initial_config = 1;
|
||
Status_reg[0] = 1'b1;
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
end
|
||
else if (Instruct == P4E && WEL)
|
||
begin
|
||
sect = Address / 24'h10000;
|
||
if (((sect == 0 ||
|
||
sect == 1) && ~TBPARM) || ((sect == SecNum ||
|
||
sect == SecNum-1) && TBPARM))
|
||
begin
|
||
if (Sec_Prot[sect] == 1'b0)
|
||
begin
|
||
ESTART = 1'b1;
|
||
ESTART <= #1 1'b0;
|
||
initial_config = 1;
|
||
Status_reg[0] = 1'b1;
|
||
Addr = Address;
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[5] = 1'b1;
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
end
|
||
else if (Instruct == P8E && WEL)
|
||
begin
|
||
sect = Address / 24'h10000;
|
||
if (((sect == 0 ||
|
||
sect == 1) && ~TBPARM) || ((sect == SecNum ||
|
||
sect == SecNum-1) && TBPARM))
|
||
begin
|
||
if (Sec_Prot[sect] == 1'b0)
|
||
begin
|
||
ESTART = 1'b1;
|
||
ESTART <= #1 1'b0;
|
||
initial_config = 1;
|
||
Status_reg[0] = 1'b1;
|
||
Addr = Address;
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
end
|
||
else
|
||
begin
|
||
Status_reg[5] = 1'b1;
|
||
Status_reg[1] = 1'b0;
|
||
end
|
||
end
|
||
else if (Instruct == CLSR)
|
||
begin
|
||
Status_reg[5] = 1'b0;
|
||
Status_reg[6] = 1'b0;
|
||
end
|
||
else if (Instruct == DP)
|
||
begin
|
||
RES_in <= 1'b0;
|
||
DP_in = 1'b1;
|
||
end
|
||
else if (Instruct == RES_READ_ES)
|
||
begin
|
||
RES_in <= 1'b1;
|
||
end
|
||
end
|
||
|
||
end
|
||
|
||
DP_DOWN :
|
||
begin
|
||
if (~write)
|
||
begin
|
||
if (Instruct == RES_READ_ES)
|
||
RES_in = #1 1'b1;
|
||
end
|
||
end
|
||
|
||
endcase
|
||
end
|
||
|
||
if(current_state_event || EDONE)
|
||
begin
|
||
case (current_state)
|
||
|
||
SECTOR_ER :
|
||
begin
|
||
ADDRHILO_SEC(AddrLo, AddrHi, Addr);
|
||
for (i=AddrLo;i<=AddrHi;i=i+1)
|
||
begin
|
||
Mem[i] = -1;
|
||
end
|
||
if (EDONE)
|
||
begin
|
||
Status_reg[0] = 1'b0;
|
||
Status_reg[1] = 1'b0;
|
||
for (i=AddrLo;i<=AddrHi;i=i+1)
|
||
begin
|
||
Mem[i] = MaxData;
|
||
end
|
||
end
|
||
end
|
||
BULK_ER :
|
||
begin
|
||
for (i=0;i<=AddrRANGE;i=i+1)
|
||
begin
|
||
Mem[i] = -1;
|
||
end
|
||
|
||
if (EDONE)
|
||
begin
|
||
Status_reg[0] = 1'b0;
|
||
Status_reg[1] = 1'b0;
|
||
for (i=0;i<=AddrRANGE;i=i+1)
|
||
begin
|
||
Mem[i] = MaxData;
|
||
end
|
||
end
|
||
end
|
||
P4_ER :
|
||
begin
|
||
ADDRHILO_PB4(AddrLo, AddrHi, Addr);
|
||
for (i=AddrLo;i<=AddrHi;i=i+1)
|
||
begin
|
||
Mem[i] = -1;
|
||
end
|
||
if (EDONE)
|
||
begin
|
||
Status_reg[0] = 1'b0;
|
||
Status_reg[1] = 1'b0;
|
||
for (i=AddrLo;i<=AddrHi;i=i+1)
|
||
begin
|
||
Mem[i] = MaxData;
|
||
end
|
||
end
|
||
end
|
||
P8_ER :
|
||
begin
|
||
ADDRHILO_PB8(AddrLo, AddrHi, Addr);
|
||
for (i=AddrLo;i<=AddrHi;i=i+1)
|
||
begin
|
||
Mem[i] = -1;
|
||
end
|
||
if (EDONE)
|
||
begin
|
||
Status_reg[0] = 1'b0;
|
||
Status_reg[1] = 1'b0;
|
||
for (i=AddrLo;i<=AddrHi;i=i+1)
|
||
begin
|
||
Mem[i] = MaxData;
|
||
end
|
||
end
|
||
end
|
||
endcase
|
||
end
|
||
|
||
if(current_state_event || WDONE)
|
||
begin
|
||
if (current_state == WRITE_SR)
|
||
begin
|
||
if (WDONE)
|
||
begin
|
||
Status_reg[0] = 1'b0;//WIP
|
||
Status_reg[1] = 1'b0;//WEL
|
||
//SRWD bit
|
||
Status_reg[7] = Status_reg_in[7];//MSB first
|
||
|
||
if (FREEZE == 0)
|
||
begin
|
||
//The Freeze Bit, when set to 1, locks the current
|
||
//state of the BP2-0 bits in Status Register,
|
||
//the TBPROT and TBPARM bits in the Config Register
|
||
//As long as the FREEZE bit remains cleared to logic
|
||
//'0', the other bits of the Configuration register
|
||
//including FREEZE are writeable.
|
||
Status_reg[4] = Status_reg_in[4];// BP2
|
||
Status_reg[3] = Status_reg_in[3];// BP1
|
||
Status_reg[2] = Status_reg_in[2];// BP0
|
||
|
||
if (cfg_write)
|
||
begin
|
||
Sec_conf_reg[0] = Sec_conf_reg_in[0];// FREEZE
|
||
|
||
if (TBPARM == 1'b0 && initial_config == 1'b0)
|
||
begin
|
||
Sec_conf_reg[2] = Sec_conf_reg_in[2];//TBPARM
|
||
end
|
||
|
||
if (TBPROT == 1'b0 && initial_config == 1'b0)
|
||
begin
|
||
Sec_conf_reg[5] = Sec_conf_reg_in[5];//TBPROT
|
||
end
|
||
end
|
||
|
||
change_BP = 1'b1;
|
||
#1 change_BP = 1'b0;
|
||
end
|
||
|
||
if (cfg_write)
|
||
begin
|
||
Sec_conf_reg[1] = Sec_conf_reg_in[1];// QUAD
|
||
|
||
if (BPNV == 1'b0)
|
||
begin
|
||
Sec_conf_reg[3] = Sec_conf_reg_in[3];//BPNV
|
||
end
|
||
end
|
||
|
||
end
|
||
end
|
||
end
|
||
|
||
if(current_state_event || PDONE)
|
||
begin
|
||
if (current_state == PAGE_PG)
|
||
begin
|
||
ADDRHILO_PG(AddrLo, AddrHi, Addr);
|
||
cnt = 0;
|
||
|
||
for (i=0;i<=wr_cnt;i=i+1)
|
||
begin
|
||
new_int = WData[i];
|
||
old_int = Mem[Addr + i - cnt];
|
||
if (new_int > -1)
|
||
begin
|
||
new_bit = new_int;
|
||
if (old_int > -1)
|
||
begin
|
||
old_bit = old_int;
|
||
for(j=0;j<=7;j=j+1)
|
||
if (~old_bit[j])
|
||
new_bit[j]=1'b0;
|
||
new_int=new_bit;
|
||
end
|
||
|
||
WData[i]= new_int;
|
||
end
|
||
else
|
||
begin
|
||
WData[i] = -1;
|
||
end
|
||
|
||
Mem[Addr + i -cnt] = - 1;
|
||
|
||
if ((Addr + i) == AddrHi)
|
||
begin
|
||
Addr = AddrLo;
|
||
cnt = i + 1;
|
||
end
|
||
end
|
||
|
||
cnt = 0;
|
||
|
||
if (PDONE)
|
||
begin
|
||
Status_reg[0] = 1'b0;//wip
|
||
Status_reg[1] = 1'b0;// wel
|
||
for (i=0;i<=wr_cnt;i=i+1)
|
||
begin
|
||
Mem[Addr_tmp + i - cnt] = WData[i];
|
||
if ((Addr_tmp + i) == AddrHi)
|
||
begin
|
||
Addr_tmp = AddrLo;
|
||
cnt = i + 1;
|
||
end
|
||
end
|
||
end
|
||
end
|
||
end
|
||
|
||
if(current_state_event || PDONE)
|
||
begin
|
||
if (current_state == OTP_PG)
|
||
begin
|
||
new_int = WOTPData;
|
||
old_int = OTPMem[Addr];
|
||
if (new_int > -1)
|
||
begin
|
||
new_bit = new_int;
|
||
if (old_int > -1)
|
||
begin
|
||
old_bit = old_int;
|
||
for(j=0;j<=7;j=j+1)
|
||
begin
|
||
if (~old_bit[j])
|
||
new_bit[j] = 1'b0;
|
||
end
|
||
new_int = new_bit;
|
||
end
|
||
WOTPData = new_int;
|
||
end
|
||
else
|
||
begin
|
||
WOTPData = -1;
|
||
end
|
||
OTPMem[Addr] = -1;
|
||
if (PDONE)
|
||
begin
|
||
Status_reg[0] = 1'b0;
|
||
Status_reg[1] = 1'b0;
|
||
OTPMem[Addr] = WOTPData;
|
||
PR_LOCK1 = {OTPMem[257],OTPMem[256]};
|
||
|
||
PR_LOCK1[15:8] = OTPMem[257];
|
||
PR_LOCK1[7:0] = OTPMem[256];
|
||
PR_LOCK2[15:8] = OTPMem[275];
|
||
PR_LOCK2[7:0] = OTPMem[274];
|
||
PR_LOCK3[15:8] = OTPMem[533];
|
||
PR_LOCK3[7:0] = OTPMem[532];
|
||
end
|
||
end
|
||
end
|
||
|
||
//Output Disable Control
|
||
if (CSNeg_ipd )
|
||
begin
|
||
SIOut_zd = 1'bZ;
|
||
HOLDNegOut_zd = 1'bZ;
|
||
WPNegOut_zd = 1'bZ;
|
||
SOut_zd = 1'bZ;
|
||
end
|
||
|
||
if (rising_edge_RES_out)
|
||
begin
|
||
if(RES_out)
|
||
begin
|
||
RES_in = 1'b0;
|
||
end
|
||
end
|
||
|
||
if (rising_edge_DP_out)
|
||
begin
|
||
if (current_state == DP_DOWN_WAIT)
|
||
begin
|
||
DP_in = 1'b0;
|
||
end
|
||
end
|
||
|
||
end
|
||
|
||
always @(change_BP)
|
||
begin
|
||
if (change_BP)
|
||
begin
|
||
case (Status_reg[4:2])
|
||
3'b000 :
|
||
begin
|
||
Sec_Prot = 256'h0;
|
||
end
|
||
|
||
3'b001 :
|
||
begin
|
||
if (~Sec_conf_reg[5])
|
||
begin
|
||
Sec_Prot[SecNum : (SecNum+1)*63/64] = 2'b11;
|
||
Sec_Prot[(SecNum+1)*63/64 - 1 : 0] = 126'h0;
|
||
end
|
||
else
|
||
begin
|
||
Sec_Prot[(SecNum+1)/64 - 1 : 0] = 2'b11;
|
||
Sec_Prot[SecNum : (SecNum+1)/64] = 126'h0;
|
||
end
|
||
end
|
||
|
||
3'b010 :
|
||
begin
|
||
if (~Sec_conf_reg[5])
|
||
begin
|
||
Sec_Prot[SecNum : (SecNum+1)*31/32] = 4'hF;
|
||
Sec_Prot[(SecNum+1)*31/32 - 1 : 0] = 124'h0;
|
||
end
|
||
else
|
||
begin
|
||
Sec_Prot[(SecNum+1)/32 - 1 : 0] = 4'hF;
|
||
Sec_Prot[SecNum : (SecNum+1)/32] = 124'h0;
|
||
end
|
||
end
|
||
|
||
3'b011 :
|
||
begin
|
||
if (~Sec_conf_reg[5])
|
||
begin
|
||
Sec_Prot[SecNum : (SecNum+1)*15/16] = 8'hFF;
|
||
Sec_Prot[(SecNum+1)*15/16 - 1 : 0] = 120'h0;
|
||
end
|
||
else
|
||
begin
|
||
Sec_Prot[(SecNum+1)/16 - 1 : 0] = 8'hFF;
|
||
Sec_Prot[SecNum : (SecNum+1)/16] = 120'h0;
|
||
end
|
||
end
|
||
|
||
3'b100 :
|
||
begin
|
||
if (~Sec_conf_reg[5])
|
||
begin
|
||
Sec_Prot[SecNum : (SecNum+1)*7/8] = 16'hFFFF;
|
||
Sec_Prot[(SecNum+1)*7/8 - 1 : 0] = 112'h0;
|
||
end
|
||
else
|
||
begin
|
||
Sec_Prot[(SecNum+1)/8 - 1 : 0] = 16'hFFFF;
|
||
Sec_Prot[SecNum : (SecNum+1)/8] = 112'h0;
|
||
end
|
||
end
|
||
|
||
3'b101 :
|
||
begin
|
||
if (~Sec_conf_reg[5])
|
||
begin
|
||
Sec_Prot[SecNum : (SecNum+1)*3/4]
|
||
= 32'hFFFFFFFF;
|
||
Sec_Prot[(SecNum+1)*3/4 - 1 : 0] = 96'h0;
|
||
end
|
||
else
|
||
begin
|
||
Sec_Prot[(SecNum+1)/4 - 1 : 0]
|
||
= 32'hFFFFFFFF;
|
||
Sec_Prot[SecNum : (SecNum+1)/4] = 96'h0;
|
||
end
|
||
end
|
||
|
||
3'b110 :
|
||
begin
|
||
if (~Sec_conf_reg[5])
|
||
begin
|
||
Sec_Prot[SecNum : (SecNum+1)/2]
|
||
= 64'hFFFFFFFFFFFFFFFF;
|
||
Sec_Prot[(SecNum+1)/2 - 1 : 0] = 64'h0;
|
||
end
|
||
else
|
||
begin
|
||
Sec_Prot[(SecNum+1)/2 - 1 : 0]
|
||
= 64'hFFFFFFFFFFFFFFFF;
|
||
Sec_Prot[SecNum : (SecNum+1)/2] = 64'h0;
|
||
end
|
||
end
|
||
|
||
3'b111 :
|
||
begin
|
||
Sec_Prot = 128'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;
|
||
end
|
||
|
||
endcase
|
||
end
|
||
end
|
||
|
||
assign fast_rd = rd_fast;
|
||
assign rd = rd_slow;
|
||
assign rd_jid = rd_jedec;
|
||
|
||
always @(SOut_zd or HOLDNeg_in or SIOut_zd)
|
||
begin
|
||
if (~HOLDNeg_in && ~QUAD)
|
||
begin
|
||
hold_mode = 1'b1;
|
||
SIOut_z = 1'bZ;
|
||
SOut_z = 1'bZ;
|
||
end
|
||
else
|
||
begin
|
||
if (hold_mode)
|
||
begin
|
||
SIOut_z <= #(tpd_HOLDNeg_SO) SIOut_zd;
|
||
SOut_z <= #(tpd_HOLDNeg_SO) SOut_zd;
|
||
hold_mode = 1'b0;
|
||
end
|
||
else
|
||
begin
|
||
SIOut_z = SIOut_zd;
|
||
SOut_z = SOut_zd;
|
||
hold_mode = 1'b0;
|
||
end
|
||
end
|
||
end
|
||
|
||
// Procedure ADDRHILO_SEC
|
||
task ADDRHILO_SEC;
|
||
inout AddrLOW;
|
||
inout AddrHIGH;
|
||
input Addr;
|
||
integer AddrLOW;
|
||
integer AddrHIGH;
|
||
integer Addr;
|
||
integer sector;
|
||
begin
|
||
sector = Addr / 20'h10000;
|
||
AddrLOW = sector * 20'h10000;
|
||
AddrHIGH = sector * 20'h10000 + 16'hFFFF;
|
||
end
|
||
endtask
|
||
|
||
// Procedure ADDRHILO_PG
|
||
task ADDRHILO_PG;
|
||
inout AddrLOW;
|
||
inout AddrHIGH;
|
||
input Addr;
|
||
integer AddrLOW;
|
||
integer AddrHIGH;
|
||
integer Addr;
|
||
integer page;
|
||
begin
|
||
|
||
page = Addr / 16'h100;
|
||
AddrLOW = page * 16'h100;
|
||
AddrHIGH = page * 16'h100 + 8'hFF;
|
||
|
||
end
|
||
endtask
|
||
|
||
// Procedure ADDRHILO_PB4
|
||
task ADDRHILO_PB4;
|
||
inout AddrLOW;
|
||
inout AddrHIGH;
|
||
input Addr;
|
||
integer AddrLOW;
|
||
integer AddrHIGH;
|
||
integer Addr;
|
||
integer sector;
|
||
begin
|
||
sector = Addr / 20'h10000;
|
||
if (sector == 0 || sector == 1 ||
|
||
sector == SecNum || sector == SecNum-1)
|
||
begin
|
||
AddrLOW = (Address/(SecSize_4+1))*(SecSize_4+1);
|
||
AddrHIGH = (Address/(SecSize_4+1))*(SecSize_4+1) + SecSize_4;
|
||
end
|
||
end
|
||
endtask
|
||
|
||
// Procedure ADDRHILO_PB8
|
||
task ADDRHILO_PB8;
|
||
inout AddrLOW;
|
||
inout AddrHIGH;
|
||
input Addr;
|
||
integer AddrLOW;
|
||
integer AddrHIGH;
|
||
integer Addr;
|
||
integer sector;
|
||
begin
|
||
sector = Addr / 20'h10000;
|
||
if (sector == 0 || sector == SecNum-1)
|
||
begin
|
||
AddrLOW = (Address/(SecSize_8+1))*(SecSize_8+1);
|
||
AddrHIGH = (Address/(SecSize_8+1))*(SecSize_8+1) + SecSize_8;
|
||
end
|
||
if (sector == 1)
|
||
begin
|
||
AddrLOW = (Address/(SecSize_8+1))*(SecSize_8+1);
|
||
AddrHIGH = (Address/(SecSize_8+1))*(SecSize_8+1) + SecSize_8;
|
||
if (AddrHIGH > 20'h1FFFF)
|
||
AddrHIGH = 20'h1FFFF;
|
||
end
|
||
if (sector == SecNum)
|
||
begin
|
||
AddrLOW = (Address/(SecSize_8+1))*(SecSize_8+1);
|
||
AddrHIGH = (Address/(SecSize_8+1))*(SecSize_8+1) + SecSize_8;
|
||
if (AddrHIGH > 24'h7FFFFF)
|
||
AddrHIGH = 24'h7FFFFF;
|
||
end
|
||
end
|
||
endtask
|
||
|
||
always @(negedge CSNeg_ipd)
|
||
begin
|
||
falling_edge_CSNeg_ipd = 1'b1;
|
||
#1 falling_edge_CSNeg_ipd = 1'b0;
|
||
end
|
||
|
||
always @(posedge SCK_ipd)
|
||
begin
|
||
rising_edge_SCK_ipd = 1'b1;
|
||
#1 rising_edge_SCK_ipd = 1'b0;
|
||
end
|
||
|
||
always @(negedge SCK_ipd)
|
||
begin
|
||
falling_edge_SCK_ipd = 1'b1;
|
||
#1 falling_edge_SCK_ipd = 1'b0;
|
||
end
|
||
|
||
always @(posedge CSNeg_ipd)
|
||
begin
|
||
rising_edge_CSNeg_ipd = 1'b1;
|
||
#1 rising_edge_CSNeg_ipd = 1'b0;
|
||
end
|
||
|
||
always @(negedge write)
|
||
begin
|
||
falling_edge_write = 1'b1;
|
||
#1 falling_edge_write = 1'b0;
|
||
end
|
||
|
||
always @(posedge PDONE)
|
||
begin
|
||
rising_edge_PDONE = 1'b1;
|
||
#1 rising_edge_PDONE = 1'b0;
|
||
end
|
||
|
||
always @(posedge WDONE)
|
||
begin
|
||
rising_edge_WDONE = 1'b1;
|
||
#1 rising_edge_WDONE = 1'b0;
|
||
end
|
||
|
||
always @(posedge EDONE)
|
||
begin
|
||
rising_edge_EDONE = 1'b1;
|
||
#1 rising_edge_EDONE = 1'b0;
|
||
end
|
||
|
||
always @(posedge DP_out)
|
||
begin
|
||
rising_edge_DP_out = 1'b1;
|
||
#1 rising_edge_DP_out = 1'b0;
|
||
end
|
||
|
||
always @(posedge RES_out)
|
||
begin
|
||
rising_edge_RES_out = 1'b1;
|
||
#1 rising_edge_RES_out = 1'b0;
|
||
end
|
||
|
||
always @(posedge read_out)
|
||
begin
|
||
rising_edge_read_out = 1'b1;
|
||
#1 rising_edge_read_out = 1'b0;
|
||
end
|
||
|
||
always @(posedge PoweredUp)
|
||
begin
|
||
rising_edge_powered = 1'b1;
|
||
#1 rising_edge_powered = 1'b0;
|
||
end
|
||
|
||
always @(Instruct)
|
||
begin
|
||
Instruct_event = 1'b1;
|
||
#1 Instruct_event = 1'b0;
|
||
end
|
||
|
||
always @(change_addr)
|
||
begin
|
||
change_addr_event = 1'b1;
|
||
#1 change_addr_event = 1'b0;
|
||
end
|
||
|
||
always @(current_state)
|
||
begin
|
||
current_state_event = 1'b1;
|
||
#1 current_state_event = 1'b0;
|
||
end
|
||
|
||
endmodule |