jensandClaude Sonnet 4.6
88357b31f6
PyQt5.Qwt isn't pip-installable; it only existed via the apt package python3-pyqt5.qwt, so pip-installing client/requirements.txt's plain PyPI PyQt5 always crashed with "No module named 'PyQt5.Qwt'". Qwt was only used for 3 QwtSlider widgets (Slider_temp_soll, Slider_pwr_soll, Slider_speed_soll). Swap them for stock QSlider in brewpi.ui, regenerate brewpi_win.py via pyuic5, and update brewpi_gui.py's setLowerBound/setUpperBound calls to QSlider's integer-only setMinimum/setMaximum. The GUI now runs from a plain `pip install -r client/requirements.txt` venv with no system PyQt5 packages required. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
129 lines
5.4 KiB
Markdown
129 lines
5.4 KiB
Markdown
# BrewPi
|
|
|
|
A Python-based controller for automating the mash/brewing process of beer: it
|
|
holds a pot of liquid at target temperatures (or ramps it at a target heating
|
|
rate) according to a configurable mash schedule, drives a heater and stirrer,
|
|
and exposes live control/telemetry over a WebSocket so a desktop GUI (or any
|
|
other client) can monitor and steer the brew.
|
|
|
|
The project began as a simulation/control-theory playground (Kalman filter +
|
|
Smith-predictor temperature control, pot heat-diffusion model, see
|
|
[`docs/NonLinMPC.pdf`](docs/NonLinMPC.pdf)) and has grown real-hardware
|
|
backends for an induction hob and an RTD temperature probe.
|
|
|
|
## Architecture
|
|
|
|
```
|
|
brewpi/brewpi.py Server entry point: wires sensor, pot/plant,
|
|
heater, temperature controller and stirrer
|
|
together, runs them as asyncio tasks, and
|
|
serves state/commands over a WebSocket.
|
|
|
|
client/brewpi_gui.py PyQt5 desktop client (brewpi.ui) that connects
|
|
to the server's WebSocket, displays live
|
|
temperature/power/state, and lets the user set
|
|
target temperature, heat rate, stirrer speed,
|
|
and switch the heater/stirrer on or off.
|
|
|
|
components/ Pluggable building blocks behind factories:
|
|
pid/ temperature controllers (PID, Smith
|
|
predictor + Kalman filter) and the math
|
|
model used for prediction
|
|
plant/ pot heat-diffusion model used in simulation
|
|
sensor/ temperature sensors: simulated, or a real
|
|
MAX31865 RTD amplifier over SPI
|
|
actor/ heater and stirrer drivers: simulated, a
|
|
Hendi induction hob (serial protocol), or a
|
|
Pololu 1376 stirrer motor controller
|
|
|
|
tasks/ Async tasks (one per component) that poll
|
|
hardware/sim state at a fixed interval and
|
|
publish changes through the message dispatcher.
|
|
|
|
ws/ Minimal WebSocket pub/sub layer: server
|
|
(single- and multi-user), client, and a
|
|
keyed message dispatcher (e.g. "Sensor",
|
|
"Heater", "TempCtrl", "Stirrer", "Pot").
|
|
|
|
tracer.py Logs traced variables to .mat files (for
|
|
offline analysis/tuning in MATLAB/Octave,
|
|
see results.m / results_tc.m).
|
|
|
|
sude/ Mash schedules ("Sud" = brew/wort), each a
|
|
JSON list of temperature rests ("Rasten")
|
|
with target temperature, heat rate, and
|
|
optional pause for user confirmation.
|
|
|
|
config.json.templ Configuration template (real hardware).
|
|
config.json.sim Configuration template for simulation mode.
|
|
```
|
|
|
|
### Data flow
|
|
|
|
The server (`brewpi/brewpi.py`) loads `config.json`, builds the configured
|
|
sensor/heater/stirrer/controller via factories (`*Factory.create(name, ...)`)
|
|
based on the `Controller` section (`sensor_name`, `heater_name`,
|
|
`stirrer_name`, `pid_type`, or `"sim"` for any of them), and connects their
|
|
outputs to each other's inputs via `set_on_changed` callbacks, e.g.:
|
|
|
|
- sensor temperature → temperature controller's `theta_ist`
|
|
- temperature controller output `y` → heater power
|
|
- heater effective power → pot model power (simulation only)
|
|
|
|
Each component runs inside its own `ATask` at a configurable interval
|
|
(`Controller.dt`, scaled by `sim_warp_factor`) and pushes state changes onto a
|
|
keyed WebSocket channel that any connected client can subscribe to and send
|
|
commands back on (e.g. `{"TempCtrl": {"Soll": {"Temp": 65}}}`).
|
|
|
|
## Requirements
|
|
|
|
- Python 3.8+
|
|
- Server (`brewpi/requirements.txt`): `numpy`, `scipy`, `websockets`, `dpath`,
|
|
and `pyserial`/`spidev` if using real hardware backends.
|
|
- Client (`client/requirements.txt`): `PyQt5`.
|
|
|
|
Install with:
|
|
|
|
```bash
|
|
pip install -r brewpi/requirements.txt
|
|
pip install -r client/requirements.txt
|
|
```
|
|
|
|
## Running
|
|
|
|
1. Copy a config template to `config.json` next to `brewpi.py` and adjust it.
|
|
Use `config.json.sim` to run entirely in simulation (no hardware needed),
|
|
or `config.json.templ` as a starting point for real hardware (set the
|
|
heater/stirrer serial ports and sensor type).
|
|
2. Start the server:
|
|
|
|
```bash
|
|
cd brewpi
|
|
./brewpi.py
|
|
```
|
|
|
|
This serves the WebSocket on `ws://0.0.0.0:8765`.
|
|
3. Start the GUI client and connect to the server's URI:
|
|
|
|
```bash
|
|
cd client
|
|
./brewpi_gui.py
|
|
```
|
|
|
|
`brewpi/brewpi.sh` shows how this is wired up to run under a `virtualenvwrapper`
|
|
environment (`$WORKON_HOME`/`$BREWPI_HOME`) on a Raspberry Pi-style deployment.
|
|
|
|
## Mash schedules
|
|
|
|
Files under `sude/` describe a brew's mash schedule: pot weight, malt/water
|
|
weights, stirrer speed/duty, and a list of temperature rests, each with a
|
|
target temperature, heating rate, and whether to pause for user confirmation
|
|
before continuing (e.g. to add malt or check gravity).
|
|
|
|
## Logging & analysis
|
|
|
|
`tracer.py` (and `tasks/tracer.py`) periodically dump traced signals
|
|
(temperatures, heat rates, heater power) to `logs/*.mat` files, which can be
|
|
loaded in MATLAB/Octave — see `results.m` and `results_tc.m` — to evaluate
|
|
and tune the controller.
|