BrewPi

A Python-based controller for automating the mash/brewing process of beer: it holds a pot of liquid at target temperatures (or ramps it at a target heating rate) according to a configurable mash schedule, drives a heater and stirrer, and exposes live control/telemetry over a WebSocket so a desktop GUI (or any other client) can monitor and steer the brew.

The project began as a simulation/control-theory playground (Smith-predictor temperature control, pot transport-delay model, see docs/NonLinMPC.pdf) and has grown real-hardware backends for an induction hob and an RTD temperature probe.

Architecture

brewpi/brewpi.py            Server entry point: wires sensor, pot/plant,
                             heater, temperature controller and stirrer
                             together, runs them as asyncio tasks, and
                             serves state/commands over a WebSocket.

client/brewpi_gui.py        PyQt5 desktop client (brewpi.ui) that connects
                             to the server's WebSocket, displays live
                             temperature/power/state, and lets the user set
                             target temperature, heat rate, stirrer speed,
                             and switch the heater/stirrer on or off.

components/                 Pluggable building blocks behind factories:
  pid/                         temperature controllers: plain PID
                                ("Normal") or PID + Smith predictor
                                ("Smith", runs two internal pot models —
                                one with the plant's transport delay, one
                                without — to compensate for the dead time)
  plant/                       pot thermal model (transport-delay line)
                                used in simulation
  sensor/                      temperature sensors: simulated, or a real
                                MAX31865 RTD amplifier over SPI
  actor/                       heater and stirrer drivers: simulated, a
                                Hendi induction hob (serial protocol), or a
                                Pololu 1376 stirrer motor controller
  sud.py                       optional mash-schedule sequencer that steps
                                through a sude/*.json schedule and drives
                                the temperature controller from it

tasks/                       Async tasks (one per component) that poll
                             hardware/sim state at a fixed interval and
                             publish changes through the message dispatcher.

ws/                          Minimal WebSocket pub/sub layer: server
                             (single- and multi-user), client, and a
                             keyed message dispatcher (e.g. "Sensor",
                             "Heater", "TempCtrl", "Stirrer", "Pot", "Sud").

tracer.py                    Logs traced variables to .mat files (for
                             offline analysis/tuning in MATLAB/Octave,
                             see results.m / results_tc.m).

scripts/demos/               Standalone, eyeballed-plot demos (matplotlib)
                             exercising components/* in isolation — pid/,
                             plant/, and a full mash-schedule run in sud/.
                             Not used at runtime; run directly, e.g.
                             `python -m scripts.demos.sud.demo_sud`.

sude/                        Mash schedules ("Sud" = brew/wort), each a
                             JSON list of "heat"/"hold" steps with target
                             temperature/heat rate or hold duration,
                             per-step stirrer timing, and optional pause
                             for user confirmation.

config.json.templ            Configuration template (real hardware).
config.json.sim               Configuration template for simulation mode.

Data flow

The server (brewpi/brewpi.py) loads config.json, builds the configured sensor/heater/stirrer/controller via factories (*Factory.create(name, ...)) based on the Controller section (sensor_name, heater_name, stirrer_name, pid_type, or "sim" for any of them), and connects their outputs to each other's inputs via set_on_changed callbacks, e.g.:

• sensor temperature → temperature controller's theta_ist
• temperature controller output y → heater power
• heater effective power → pot model power (simulation only)

Each component runs inside its own ATask at a configurable interval (Controller.dt, scaled by sim_warp_factor) and pushes state changes onto a keyed WebSocket channel that any connected client can subscribe to and send commands back on (e.g. {"TempCtrl": {"Soll": {"Temp": 65}}}).

Requirements

• Python 3.8+
• Server (brewpi/requirements.txt): numpy, scipy, websockets, dpath, and pyserial/spidev if using real hardware backends.
• Client (client/requirements.txt): PyQt5.

Install with:

pip install -r brewpi/requirements.txt
pip install -r client/requirements.txt

Running

1. Copy a config template to config.json next to brewpi.py and adjust it. Use config.json.sim to run entirely in simulation (no hardware needed), or config.json.templ as a starting point for real hardware (set the heater/stirrer serial ports and sensor type).

2. Start the server:

   cd brewpi
   ./brewpi.py
   

   This serves the WebSocket on ws://0.0.0.0:8765.

3. Start the GUI client and connect to the server's URI:

   cd client
   ./brewpi_gui.py
   

brewpi/brewpi.sh shows how this is wired up to run under a virtualenvwrapper environment ($WORKON_HOME/$BREWPI_HOME) on a Raspberry Pi-style deployment.

Mash schedules

Files under sude/ describe a brew's mash schedule ("Sud"): pot_mass, pot_material (fixed for the whole brew), and a steps list, each either:

• a ramp — "ramp": {"rate": ..., "temp": ...} — ramp to temp at rate (°C/min), or
• a hold — "hold": {"duration": ...} — hold the current target for duration seconds (omit/0 for an immediate step).

Both ramp and hold carry a stirrer block (speed, interval_time, on_ratio): interval_time: 0 runs the stirrer continuously at speed; interval_time > 0 pulses it on a period of interval_time seconds, on for on_ratio * interval_time of it. A step may also set user_wait_for_continue: true (with an optional user_message to prompt the user with) to pause for confirmation once the step completes, e.g. to add malt or check gravity, instead of advancing immediately.

Each step also has its own grain_mass/water_mass (defaulted like everything else from default.step), since both change over the course of a brew — e.g. malt going in partway through, or water boiling off. Pass a step's grain_mass/water_mass to Sud.derive_plant_params() (together with the brew-wide pot_mass/pot_material) to get that step's lumped Pot M/C; scripts/demos/sud/demo_sud.py recomputes and re-applies these (via Pot.set_thermal_params()/TempController.set_model_params(), on both the real plant and the controller's Smith-predictor model) every time the current step changes, instead of deriving them once at startup.

The top-level default.step object gives every field above (including the nested ramp/hold/stirrer blocks) a default value; a step in steps only needs to specify the fields it overrides — anything it omits is filled in from default.step, recursively. A step is a ramp or a hold depending on which of those two keys it specifies; the other is not defaulted in.

Set the top-level sud config key to a path under sude/ (see config.json.sim/config.json.templ) to have the server step through it automatically: components/sud.py's Sud resolves each raw step against default.step and tracks the current (resolved) step, while tasks/sud.py's SudTask drives the temperature controller's theta_soll/heatrate_soll from ramp steps (advancing once theta_ist settles close to the target), counts down hold steps' duration, and applies each step's stirrer block (interval_time/on_ratio map directly onto the stirrer's cycle time/duty cycle). It exposes progress (current step, remaining hold time, state, any user_message) on the "Sud" WebSocket channel and accepts {"Sud": {"Start": true}} to begin the schedule and {"Sud": {"Confirm": true}} to acknowledge a pause and move to the next step. Omit sud from the config to run without schedule automation (manual theta_soll/heatrate_soll control via the GUI, as before).

Logging & analysis

tracer.py (and tasks/tracer.py) periodically dump traced signals (temperatures, heat rates, heater power) to logs/*.mat files, which can be loaded in MATLAB/Octave — see results.m and results_tc.m — to evaluate and tune the controller.