Initial import

git-svn-id: http://moon:8086/svn/software/trunk/libsrc/xerces-c-3.0.0@1 b431acfa-c32f-4a4a-93f1-934dc6c82436

projects/Win32/BCC.551/Xerces-all/CreateDOMDocument/CreateDOMDocument.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\CreateDOMDocument.exe
+OBJFILES = $(TARGETPATH)\obj\CreateDOMDocument.obj
+RESFILES = 
+MAINSOURCE = CreateDOMDocument.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\CreateDOMDocument;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;WIN32_LEAN_AND_MEAN;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\CreateDOMDocument;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/DOMCount/DOMCount.mak

@@ -0,0 +1,141 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\DOMCount.exe
+OBJFILES = $(TARGETPATH)\obj\DOMCount.obj
+RESFILES = 
+MAINSOURCE = DOMCount.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\DOMCount;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\DOMCount;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/DOMMemTest/DOMMemTest.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\DOMMemTest.exe
+OBJFILES = $(TARGETPATH)\obj\DOMMemTest.obj
+RESFILES = 
+MAINSOURCE = DOMMemTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\DOM\DOMMemTest;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\DOM\DOMMemTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/DOMPrint/DOMPrint.mak

@@ -0,0 +1,144 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\DOMPrint.exe
+OBJFILES = $(TARGETPATH)\obj\DOMPrint.obj \
+    $(TARGETPATH)\obj\DOMTreeErrorReporter.obj \
+    $(TARGETPATH)\obj\DOMPrintFilter.obj \
+    $(TARGETPATH)\obj\DOMPrintErrorHandler.obj
+RESFILES = 
+MAINSOURCE = DOMPrint.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\DOMPrint
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;WIN32_LEAN_AND_MEAN;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\DOMPrint;..\..\..\..\..\src
+LIBPATH = ..\..\..\..\..\samples\src\DOMPrint
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/DOMRangeTest/DOMRangeTest.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\RangeTest.exe
+OBJFILES = $(TARGETPATH)\obj\RangeTest.obj
+RESFILES = 
+MAINSOURCE = RangeTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\DOM\RangeTest;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\DOM\RangeTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/DOMTest/DOMTest.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\DOMTest.exe
+OBJFILES = $(TARGETPATH)\obj\DTest.obj
+RESFILES = 
+MAINSOURCE = DTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\DOM\DOMTest;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\DOM\DOMTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/DOMTraversal/DOMTraversal.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\DOMTraversalTest.exe
+OBJFILES = $(TARGETPATH)\obj\Traversal.obj
+RESFILES = 
+MAINSOURCE = Traversal.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\DOM\Traversal;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\DOM\Traversal;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/DOMTypeInfoTest/DOMTypeInfoTest.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\DOMTypeInfoTest.exe
+OBJFILES = $(TARGETPATH)\obj\TypeInfo.obj
+RESFILES = 
+MAINSOURCE = TypeInfo.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\DOM\TypeInfo;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;WIN32_LEAN_AND_MEAN;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\DOM\TypeInfo;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/EncodingTest/EncodingTest.mak

@@ -0,0 +1,141 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\EncodingTest.exe
+OBJFILES = $(TARGETPATH)\obj\EncodingTest.obj
+RESFILES = 
+MAINSOURCE = EncodingTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\EncodingTest;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\EncodingTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/EnumVal/EnumVal.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\EnumVal.exe
+OBJFILES = $(TARGETPATH)\obj\EnumVal.obj
+RESFILES = 
+MAINSOURCE = EnumVal.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\EnumVal;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\EnumVal;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/InitTermTest/InitTermTest.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\InitTermTest.exe
+OBJFILES = $(TARGETPATH)\obj\InitTermTest.obj
+RESFILES = 
+MAINSOURCE = InitTermTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\InitTermTest;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\InitTermTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/MakeBuildDirs.bat

@@ -0,0 +1,8 @@
+REM CommandInterpreter: %COMSPEC%
+
+REM -- Create the Xerces-C target directories for the Borland C++Builder 5 or Borland C++ 5.5.1 projects
+
+mkdir %0\..\..\..\..\..\Build
+mkdir %0\..\..\..\..\..\Build\Win32
+mkdir %0\..\..\..\..\..\Build\Win32\BCC.551
+mkdir %0\..\..\..\..\..\Build\Win32\BCC.551\obj

projects/Win32/BCC.551/Xerces-all/MemHandlerTest/MemHandlerTest.cpp

@@ -0,0 +1,20 @@
+
+#pragma hdrstop
+
+//---------------------------------------------------------------------------
+
+//---------------------------------------------------------------------------
+
+#ifdef NEVER_COMPILE
+#include <stdio.h>
+
+// Dummy entry point to satisfy the BCB IDE
+int main(int argc, char* argv[])
+{
+	printf("*** Compile XercesC Library with Deprecated DOM API for this test\n");
+	return 0;
+}
+#endif
+
+// The real entry point is in the Samples folder
+//#include <MemoryMonitor.cpp>

projects/Win32/BCC.551/Xerces-all/MemHandlerTest/MemHandlerTest.mak

@@ -0,0 +1,140 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\MemHandlerTest.exe
+OBJFILES = $(TARGETPATH)\obj\MemoryMonitor.obj $(TARGETPATH)\obj\MemHandlerTest.obj
+RESFILES = 
+MAINSOURCE = MemHandlerTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\..\..\..\..\tests\src\MemHandlerTest
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT;WIN32_LEAN_AND_MEAN;
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\MemHandlerTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/MemParse/MemParse.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\MemParse.exe
+OBJFILES = $(TARGETPATH)\obj\MemParse.obj \
+           $(TARGETPATH)\obj\MemParseHandlers.obj
+RESFILES = 
+MAINSOURCE = MemParse.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\MemParse
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\MemParse;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/NetAccessorTest/NetAccessorTest.mak

@@ -0,0 +1,141 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\NetAccessorTest.exe
+OBJFILES = $(TARGETPATH)\obj\NetAccessorTest.obj
+RESFILES = 
+MAINSOURCE = NetAccessorTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\NetAccessorTest
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\NetAccessorTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/PParse/PParse.mak

@@ -0,0 +1,143 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\PParse.exe
+OBJFILES = $(TARGETPATH)\obj\PParse.obj \
+           $(TARGETPATH)\obj\PParseHandlers.obj
+RESFILES = 
+MAINSOURCE = PParse.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\PParse
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\PParse;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/PSVIWriter/PSVIWriter.mak

@@ -0,0 +1,143 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\PSVIWriter.exe
+OBJFILES = $(TARGETPATH)\obj\PSVIWriter.obj \
+    $(TARGETPATH)\obj\PSVIWriterHandlers.obj
+RESFILES = 
+MAINSOURCE = PSVIWriter.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\PSVIWriter
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL;WIN32_LEAN_AND_MEAN
+INCLUDEPATH = ..\..\..\..\..\samples\src\PSVIWriter;..\..\..\..\..\src
+LIBPATH = ..\..\..\..\..\samples\src\PSVIWriter
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/Redirect/Redirect.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\Redirect.exe
+OBJFILES = $(TARGETPATH)\obj\Redirect.obj \
+           $(TARGETPATH)\obj\RedirectHandlers.obj
+RESFILES = 
+MAINSOURCE = Redirect.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\Redirect
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\Redirect;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/SAX2Count/SAX2Count.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\SAX2Count.exe
+OBJFILES = $(TARGETPATH)\obj\SAX2Count.obj \
+    $(TARGETPATH)\obj\SAX2CountHandlers.obj
+RESFILES = 
+MAINSOURCE = SAX2Count.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\SAX2Count
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\SAX2Count;..\..\..\..\..\src
+LIBPATH = ..\..\..\..\..\samples\src\SAX2Count
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zi
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/SAX2Print/SAX2Print.mak

@@ -0,0 +1,143 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\SAX2Print.exe
+OBJFILES = $(TARGETPATH)\obj\SAX2Print.obj \
+    $(TARGETPATH)\obj\SAX2PrintHandlers.obj \
+	$(TARGETPATH)\obj\SAX2FilterHandlers.obj
+RESFILES = 
+MAINSOURCE = SAX2Print.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\SAX2Print
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\SAX2Print;..\..\..\..\..\src
+LIBPATH = ..\..\..\..\..\samples\src\SAX2Print
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/SAXCount/SAXCount.mak

@@ -0,0 +1,141 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\SAXCount.exe
+OBJFILES = $(TARGETPATH)\obj\SAXCount.obj \
+    $(TARGETPATH)\obj\SAXCountHandlers.obj
+RESFILES = 
+MAINSOURCE = SAXCount.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\SAXCount
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\SAXCount;..\..\..\..\..\src
+LIBPATH = ..\..\..\..\..\samples\src\SAXCount
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/SAXPrint/SAXPrint.mak

@@ -0,0 +1,141 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\SAXPrint.exe
+OBJFILES = $(TARGETPATH)\obj\SAXPrint.obj \
+    $(TARGETPATH)\obj\SAXPrintHandlers.obj
+RESFILES = 
+MAINSOURCE = SAXPrint.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\SAXPrint
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\SAXPrint;..\..\..\..\..\src
+LIBPATH = ..\..\..\..\..\samples\src\SAXPrint
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -5 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -D"" -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/SCMPrint/SCMPrint.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\SCMPrint.exe
+OBJFILES = $(TARGETPATH)\obj\SCMPrint.obj
+RESFILES = 
+MAINSOURCE = SCMPrint.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\SCMPrint
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\SCMPrint;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/SEnumVal/SEnumVal.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\SEnumVal.exe
+OBJFILES = $(TARGETPATH)\obj\SEnumVal.obj
+RESFILES = 
+MAINSOURCE = SEnumVal.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\SEnumVal
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\SEnumVal;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/StdInParse/StdInParse.mak

@@ -0,0 +1,143 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\StdInParse.exe
+OBJFILES = $(TARGETPATH)\obj\StdInParse.obj \
+           $(TARGETPATH)\obj\StdInParseHandlers.obj
+RESFILES = 
+MAINSOURCE = StdInParse.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\samples\src\StdInParse
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\samples\src\StdInParse;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/ThreadTest/ThreadTest.mak

@@ -0,0 +1,140 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\ThreadTest.exe
+OBJFILES = $(TARGETPATH)\obj\ThreadTest.obj
+RESFILES = 
+MAINSOURCE = ThreadTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\ThreadTest
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\ThreadTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/XSValueTest/XSValueTest.mak

@@ -0,0 +1,142 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\XSValueTest.exe
+OBJFILES = $(TARGETPATH)\obj\XSValueTest.obj
+RESFILES = 
+MAINSOURCE = XSValueTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\XSValueTest
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\XSValueTest;..\..\..\..\..\src
+LIBPATH = 
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/XSerializerTest/XSerializerTest.mak

@@ -0,0 +1,143 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\XSerializerTest.exe
+OBJFILES = $(TARGETPATH)\obj\XSerializerTest.obj \
+    $(TARGETPATH)\obj\XSerializerHandlers.obj
+RESFILES = 
+MAINSOURCE = XSerializerTest.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES = $(TARGETPATH)\xerces-bor_$(XERCESVER).lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = ..\..\..\..\..\tests\src\XSerializerTest
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+USERDEFINES = _DEBUG;XERCES_NO_CONFIGURE_SUPPORT
+SYSDEFINES = _NO_VCL;NO_STRICT;_VIS_NOLIB;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\tests\src\XSerializerTest;..\..\..\..\..\src
+LIBPATH = ..\..\..\..\..\tests\src\XSerializerTest
+WARNINGS= 
+# ---------------------------------------------------------------------------
+CFLAG1 = -Od -w -g0 -Tkh30000 -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM -tWC
+IDLCFLAGS = -src_suffix cpp -boa
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHN -M
+RFLAGS = 
+AFLAGS = /mx /w2 /zd
+LFLAGS = -I$(TARGETPATH)\obj -ap -Tpe -x -Gn -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/Xerces-all.mak

@@ -0,0 +1,172 @@
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+default: all
+#------------------------------------------------------------------------------
+# Rules for building from command prompt
+
+MakeBuildDirs: MakeBuildDirs.bat
+  call $**
+
+MAKEN = $(ROOT)\bin\$(MAKE) -$(MAKEFLAGS) -f
+PROJECTNAMES = XercesLib DOMCount DOMPrint SAXCount SAXPrint SAX2Count SAX2Print \
+  DOMTest DOMMemTest DOMRangeTest DOMTraversal EncodingTest InitTermTest \
+  ThreadTest MemHandlerTest XSerializerTest PSVIWriter SCMPrint MemParse Redirect \
+  StdInParse PParse EnumVal SEnumVal CreateDOMDocument XSValueTest \
+  DOMTypeInfoTest NetAccessorTest
+
+!include ..\..\..\..\version.incl
+XERCESVER=$(VER)
+
+buildall: clearall $(PROJECTNAMES)
+all: $(PROJECTNAMES)
+clearall:
+  del /q ..\..\..\..\Build\Win32\BCC.551\*.* ..\..\..\..\Build\Win32\BCC.551\obj\*.*
+
+XercesLib: XercesLib\XercesLib.mak
+  cd $<
+  copy ..\..\..\..\..\src\xercesc\util\Xerces_autoconf_config.borland.hpp ..\..\..\..\..\src\xercesc\util\Xerces_autoconf_config.hpp
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER) -DWITHASM=$(WITHASM)
+  cd ..
+
+DOMPrint: DOMPrint\DOMPrint.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+DOMCount: DOMCount\DOMCount.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+SAXCount: SAXCount\SAXCount.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+SAXPrint: SAXPrint\SAXPrint.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+SAX2Count: SAX2Count\SAX2Count.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+SAX2Print: SAX2Print\SAX2Print.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+DOMTest: DOMTest\DOMTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+DOMMemTest: DOMMemTest\DOMMemTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+DOMRangeTest: DOMRangeTest\DOMRangeTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+DOMTraversal: DOMTraversal\DOMTraversal.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+EncodingTest: EncodingTest\EncodingTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+InitTermTest: InitTermTest\InitTermTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+ThreadTest: ThreadTest\ThreadTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+MemHandlerTest: MemHandlerTest\MemHandlerTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+XSerializerTest: XSerializerTest\XSerializerTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+PSVIWriter: PSVIWriter\PSVIWriter.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+SCMPrint: SCMPrint\SCMPrint.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+MemParse: MemParse\MemParse.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+Redirect: Redirect\Redirect.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+StdInParse: StdInParse\StdInParse.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+PParse: PParse\PParse.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+EnumVal: EnumVal\EnumVal.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+SEnumVal: SEnumVal\SEnumVal.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+CreateDOMDocument: CreateDOMDocument\CreateDOMDocument.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+XSValueTest: XSValueTest\XSValueTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+DOMTypeInfoTest: DOMTypeInfoTest\DOMTypeInfoTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+NetAccessorTest: NetAccessorTest\NetAccessorTest.mak
+  cd $<
+  $(MAKEN) $<.mak -DXERCESVER=$(XERCESVER)
+  cd ..
+
+

projects/Win32/BCC.551/Xerces-all/XercesLib/XercesLib.cpp

@@ -0,0 +1,28 @@
+//---------------------------------------------------------------------------
+#pragma hdrstop
+#include <windows.h>
+//---------------------------------------------------------------------------
+//   Important note about DLL memory management when your DLL uses the
+//   static version of the RunTime Library:
+//
+//   If your DLL exports any functions that pass String objects (or structs/
+//   classes containing nested Strings) as parameter or function results,
+//   you will need to add the library MEMMGR.LIB to both the DLL project and
+//   any other projects that use the DLL.  You will also need to use MEMMGR.LIB
+//   if any other projects which use the DLL will be perfomring new or delete
+//   operations on any non-TObject-derived classes which are exported from the
+//   DLL. Adding MEMMGR.LIB to your project will change the DLL and its calling
+//   EXE's to use the BORLNDMM.DLL as their memory manager.  In these cases,
+//   the file BORLNDMM.DLL should be deployed along with your DLL.
+//
+//   To avoid using BORLNDMM.DLL, pass string information using "char *" or
+//   ShortString parameters.
+//
+//   If your DLL uses the dynamic version of the RTL, you do not need to
+//   explicitly add MEMMGR.LIB as this will be done implicitly for you
+//---------------------------------------------------------------------------
+int WINAPI DllEntryPoint(HINSTANCE hinst, unsigned long reason, void*)
+{
+	return 1;
+}
+//---------------------------------------------------------------------------

projects/Win32/BCC.551/Xerces-all/XercesLib/XercesLib.mak

@@ -0,0 +1,445 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+TARGETPATH=..\..\..\..\..\Build\Win32\BCC.551
+PROJECT = $(TARGETPATH)\xerces-bor_$(XERCESVER).dll
+OBJFILES = $(TARGETPATH)\obj\XercesLib.obj \
+    $(TARGETPATH)\obj\InMemMsgLoader.obj \
+    $(TARGETPATH)\obj\Win32TransService.obj \
+    $(TARGETPATH)\obj\BinHTTPURLInputStream.obj \
+    $(TARGETPATH)\obj\WinSockNetAccessor.obj \
+    $(TARGETPATH)\obj\BinHTTPInputStreamCommon.obj \
+    $(TARGETPATH)\obj\ASCIIRangeFactory.obj \
+    $(TARGETPATH)\obj\BlockRangeFactory.obj \
+    $(TARGETPATH)\obj\BMPattern.obj \
+    $(TARGETPATH)\obj\CharToken.obj \
+    $(TARGETPATH)\obj\ClosureToken.obj \
+    $(TARGETPATH)\obj\ConcatToken.obj \
+    $(TARGETPATH)\obj\Match.obj \
+    $(TARGETPATH)\obj\Op.obj \
+    $(TARGETPATH)\obj\OpFactory.obj \
+    $(TARGETPATH)\obj\ParenToken.obj \
+    $(TARGETPATH)\obj\ParserForXMLSchema.obj \
+    $(TARGETPATH)\obj\RangeFactory.obj \
+    $(TARGETPATH)\obj\RangeToken.obj \
+    $(TARGETPATH)\obj\RangeTokenMap.obj \
+    $(TARGETPATH)\obj\RegularExpression.obj \
+    $(TARGETPATH)\obj\RegxParser.obj \
+    $(TARGETPATH)\obj\RegxUtil.obj \
+    $(TARGETPATH)\obj\StringToken.obj \
+    $(TARGETPATH)\obj\Token.obj \
+    $(TARGETPATH)\obj\TokenFactory.obj \
+    $(TARGETPATH)\obj\UnicodeRangeFactory.obj \
+    $(TARGETPATH)\obj\UnionToken.obj \
+    $(TARGETPATH)\obj\XMLRangeFactory.obj \
+    $(TARGETPATH)\obj\XMLUniCharacter.obj \
+    $(TARGETPATH)\obj\Base64.obj \
+    $(TARGETPATH)\obj\BinFileInputStream.obj \
+    $(TARGETPATH)\obj\BinInputStream.obj \
+    $(TARGETPATH)\obj\BinMemInputStream.obj \
+    $(TARGETPATH)\obj\BitSet.obj \
+    $(TARGETPATH)\obj\HeaderDummy.obj \
+    $(TARGETPATH)\obj\HexBin.obj \
+    $(TARGETPATH)\obj\KVStringPair.obj \
+    $(TARGETPATH)\obj\Mutexes.obj \
+    $(TARGETPATH)\obj\PlatformUtils.obj \
+    $(TARGETPATH)\obj\PSVIUni.obj \
+    $(TARGETPATH)\obj\QName.obj \
+    $(TARGETPATH)\obj\StringPool.obj \
+    $(TARGETPATH)\obj\TransService.obj \
+    $(TARGETPATH)\obj\XML256TableTranscoder.obj \
+    $(TARGETPATH)\obj\XML88591Transcoder.obj \
+    $(TARGETPATH)\obj\XMLAbstractDoubleFloat.obj \
+    $(TARGETPATH)\obj\XMLASCIITranscoder.obj \
+    $(TARGETPATH)\obj\XMLBigDecimal.obj \
+    $(TARGETPATH)\obj\XMLBigInteger.obj \
+    $(TARGETPATH)\obj\XMLChTranscoder.obj \
+    $(TARGETPATH)\obj\XMLDateTime.obj \
+    $(TARGETPATH)\obj\XMLDouble.obj \
+    $(TARGETPATH)\obj\XMLEBCDICTranscoder.obj \
+    $(TARGETPATH)\obj\XMLException.obj \
+    $(TARGETPATH)\obj\XMLFloat.obj \
+    $(TARGETPATH)\obj\XMLIBM1140Transcoder.obj \
+    $(TARGETPATH)\obj\XMLNumber.obj \
+    $(TARGETPATH)\obj\XMLString.obj \
+    $(TARGETPATH)\obj\XMLStringTokenizer.obj \
+    $(TARGETPATH)\obj\XMLUCS4Transcoder.obj \
+    $(TARGETPATH)\obj\XMLUni.obj \
+    $(TARGETPATH)\obj\XMLUri.obj \
+    $(TARGETPATH)\obj\XMLURL.obj \
+    $(TARGETPATH)\obj\XMLUTF16Transcoder.obj \
+    $(TARGETPATH)\obj\XMLUTF8Transcoder.obj \
+    $(TARGETPATH)\obj\XMLWin1252Transcoder.obj \
+    $(TARGETPATH)\obj\LocalFileInputSource.obj \
+    $(TARGETPATH)\obj\MemBufInputSource.obj \
+    $(TARGETPATH)\obj\StdInInputSource.obj \
+    $(TARGETPATH)\obj\URLInputSource.obj \
+    $(TARGETPATH)\obj\XMLAttDef.obj \
+    $(TARGETPATH)\obj\XMLAttr.obj \
+    $(TARGETPATH)\obj\XMLBuffer.obj \
+    $(TARGETPATH)\obj\XMLBufferMgr.obj \
+    $(TARGETPATH)\obj\XMLContentModel.obj \
+    $(TARGETPATH)\obj\XMLElementDecl.obj \
+    $(TARGETPATH)\obj\XMLEntityDecl.obj \
+    $(TARGETPATH)\obj\XMLFormatter.obj \
+    $(TARGETPATH)\obj\XMLNotationDecl.obj \
+    $(TARGETPATH)\obj\XMLRecognizer.obj \
+    $(TARGETPATH)\obj\XMLValidator.obj \
+    $(TARGETPATH)\obj\ElemStack.obj \
+    $(TARGETPATH)\obj\ReaderMgr.obj \
+    $(TARGETPATH)\obj\VecAttributesImpl.obj \
+    $(TARGETPATH)\obj\VecAttrListImpl.obj \
+    $(TARGETPATH)\obj\XMLReader.obj \
+    $(TARGETPATH)\obj\XMLScanner.obj \
+    $(TARGETPATH)\obj\SAX2XMLReaderImpl.obj \
+    $(TARGETPATH)\obj\SAX2XMLFilterImpl.obj \
+    $(TARGETPATH)\obj\SAXParser.obj \
+    $(TARGETPATH)\obj\DOMAttrImpl.obj \
+    $(TARGETPATH)\obj\DOMAttrMapImpl.obj \
+    $(TARGETPATH)\obj\DOMAttrNSImpl.obj \
+    $(TARGETPATH)\obj\DOMCDATASectionImpl.obj \
+    $(TARGETPATH)\obj\DOMCharacterDataImpl.obj \
+    $(TARGETPATH)\obj\DOMChildNode.obj \
+    $(TARGETPATH)\obj\DOMCommentImpl.obj \
+    $(TARGETPATH)\obj\DOMDeepNodeListImpl.obj \
+    $(TARGETPATH)\obj\DOMDocumentFragmentImpl.obj \
+    $(TARGETPATH)\obj\DOMDocumentImpl.obj \
+    $(TARGETPATH)\obj\DOMDocumentTypeImpl.obj \
+    $(TARGETPATH)\obj\DOMStringPool.obj \
+    $(TARGETPATH)\obj\DOMElementImpl.obj \
+    $(TARGETPATH)\obj\DOMElementNSImpl.obj \
+    $(TARGETPATH)\obj\DOMEntityImpl.obj \
+    $(TARGETPATH)\obj\DOMEntityReferenceImpl.obj \
+    $(TARGETPATH)\obj\DOMNamedNodeMapImpl.obj \
+    $(TARGETPATH)\obj\DOMNodeIDMap.obj \
+    $(TARGETPATH)\obj\DOMNodeImpl.obj \
+    $(TARGETPATH)\obj\DOMNodeIteratorImpl.obj \
+    $(TARGETPATH)\obj\DOMNodeListImpl.obj \
+    $(TARGETPATH)\obj\DOMNodeVector.obj \
+    $(TARGETPATH)\obj\DOMNotationImpl.obj \
+    $(TARGETPATH)\obj\DOMParentNode.obj \
+    $(TARGETPATH)\obj\DOMProcessingInstructionImpl.obj \
+    $(TARGETPATH)\obj\DOMRangeImpl.obj \
+    $(TARGETPATH)\obj\DOMTextImpl.obj \
+    $(TARGETPATH)\obj\DOMTreeWalkerImpl.obj \
+    $(TARGETPATH)\obj\Dummy.obj \
+    $(TARGETPATH)\obj\InputSource.obj \
+    $(TARGETPATH)\obj\SAXException.obj \
+    $(TARGETPATH)\obj\SAXParseException.obj \
+    $(TARGETPATH)\obj\sax2Dummy.obj \
+    $(TARGETPATH)\obj\AllContentModel.obj \
+    $(TARGETPATH)\obj\CMAny.obj \
+    $(TARGETPATH)\obj\CMBinaryOp.obj \
+    $(TARGETPATH)\obj\CMUnaryOp.obj \
+    $(TARGETPATH)\obj\ContentLeafNameTypeVector.obj \
+    $(TARGETPATH)\obj\ContentSpecNode.obj \
+    $(TARGETPATH)\obj\DFAContentModel.obj \
+    $(TARGETPATH)\obj\GrammarResolver.obj \
+    $(TARGETPATH)\obj\MixedContentModel.obj \
+    $(TARGETPATH)\obj\SimpleContentModel.obj \
+    $(TARGETPATH)\obj\AbstractNumericFacetValidator.obj \
+    $(TARGETPATH)\obj\AbstractNumericValidator.obj \
+    $(TARGETPATH)\obj\AbstractStringValidator.obj \
+    $(TARGETPATH)\obj\AnySimpleTypeDatatypeValidator.obj \
+    $(TARGETPATH)\obj\AnyURIDatatypeValidator.obj \
+    $(TARGETPATH)\obj\Base64BinaryDatatypeValidator.obj \
+    $(TARGETPATH)\obj\BooleanDatatypeValidator.obj \
+    $(TARGETPATH)\obj\DateDatatypeValidator.obj \
+    $(TARGETPATH)\obj\DateTimeValidator.obj \
+    $(TARGETPATH)\obj\DateTimeDatatypeValidator.obj \
+    $(TARGETPATH)\obj\DatatypeValidator.obj \
+    $(TARGETPATH)\obj\DatatypeValidatorFactory.obj \
+    $(TARGETPATH)\obj\DayDatatypeValidator.obj \
+    $(TARGETPATH)\obj\DecimalDatatypeValidator.obj \
+    $(TARGETPATH)\obj\DoubleDatatypeValidator.obj \
+    $(TARGETPATH)\obj\DurationDatatypeValidator.obj \
+    $(TARGETPATH)\obj\ENTITYDatatypeValidator.obj \
+    $(TARGETPATH)\obj\FloatDatatypeValidator.obj \
+    $(TARGETPATH)\obj\HexBinaryDatatypeValidator.obj \
+    $(TARGETPATH)\obj\IDDatatypeValidator.obj \
+    $(TARGETPATH)\obj\IDREFDatatypeValidator.obj \
+    $(TARGETPATH)\obj\ListDatatypeValidator.obj \
+    $(TARGETPATH)\obj\MonthDatatypeValidator.obj \
+    $(TARGETPATH)\obj\MonthDayDatatypeValidator.obj \
+    $(TARGETPATH)\obj\NameDatatypeValidator.obj \
+    $(TARGETPATH)\obj\NCNameDatatypeValidator.obj \
+    $(TARGETPATH)\obj\NOTATIONDatatypeValidator.obj \
+    $(TARGETPATH)\obj\QNameDatatypeValidator.obj \
+    $(TARGETPATH)\obj\StringDatatypeValidator.obj \
+    $(TARGETPATH)\obj\TimeDatatypeValidator.obj \
+    $(TARGETPATH)\obj\UnionDatatypeValidator.obj \
+    $(TARGETPATH)\obj\YearDatatypeValidator.obj \
+    $(TARGETPATH)\obj\YearMonthDatatypeValidator.obj \
+    $(TARGETPATH)\obj\DTDAttDef.obj \
+    $(TARGETPATH)\obj\DTDAttDefList.obj \
+    $(TARGETPATH)\obj\DTDElementDecl.obj \
+    $(TARGETPATH)\obj\DTDGrammar.obj \
+    $(TARGETPATH)\obj\DTDScanner.obj \
+    $(TARGETPATH)\obj\DTDValidator.obj \
+    $(TARGETPATH)\obj\ComplexTypeInfo.obj \
+    $(TARGETPATH)\obj\GeneralAttributeCheck.obj \
+    $(TARGETPATH)\obj\NamespaceScope.obj \
+    $(TARGETPATH)\obj\SchemaAttDef.obj \
+    $(TARGETPATH)\obj\SchemaAttDefList.obj \
+    $(TARGETPATH)\obj\SchemaElementDecl.obj \
+    $(TARGETPATH)\obj\SchemaGrammar.obj \
+    $(TARGETPATH)\obj\SchemaInfo.obj \
+    $(TARGETPATH)\obj\SchemaSymbols.obj \
+    $(TARGETPATH)\obj\SchemaValidator.obj \
+    $(TARGETPATH)\obj\SubstitutionGroupComparator.obj \
+    $(TARGETPATH)\obj\TraverseSchema.obj \
+    $(TARGETPATH)\obj\XercesAttGroupInfo.obj \
+    $(TARGETPATH)\obj\XercesElementWildcard.obj \
+    $(TARGETPATH)\obj\XercesGroupInfo.obj \
+    $(TARGETPATH)\obj\XUtil.obj \
+    $(TARGETPATH)\obj\FieldActivator.obj \
+    $(TARGETPATH)\obj\FieldValueMap.obj \
+    $(TARGETPATH)\obj\IC_Field.obj \
+    $(TARGETPATH)\obj\IC_Key.obj \
+    $(TARGETPATH)\obj\IC_KeyRef.obj \
+    $(TARGETPATH)\obj\IC_Selector.obj \
+    $(TARGETPATH)\obj\IC_Unique.obj \
+    $(TARGETPATH)\obj\IdentityConstraint.obj \
+    $(TARGETPATH)\obj\ValueStore.obj \
+    $(TARGETPATH)\obj\ValueStoreCache.obj \
+    $(TARGETPATH)\obj\XercesXPath.obj \
+    $(TARGETPATH)\obj\XPathMatcher.obj \
+    $(TARGETPATH)\obj\XPathMatcherStack.obj \
+    $(TARGETPATH)\obj\XPathSymbols.obj \
+    $(TARGETPATH)\obj\AbstractDOMParser.obj \
+    $(TARGETPATH)\obj\XercesDOMParser.obj \
+    $(TARGETPATH)\obj\DOMException.obj \
+    $(TARGETPATH)\obj\DefaultPanicHandler.obj \
+    $(TARGETPATH)\obj\PanicHandler.obj \
+    $(TARGETPATH)\obj\EncodingValidator.obj \
+    $(TARGETPATH)\obj\XSDErrorReporter.obj \
+    $(TARGETPATH)\obj\XSDDOMParser.obj \
+    $(TARGETPATH)\obj\XSDElementNSImpl.obj \
+    $(TARGETPATH)\obj\XSDLocator.obj \
+    $(TARGETPATH)\obj\DOMRangeException.obj \
+    $(TARGETPATH)\obj\DOMImplementationImpl.obj \
+    $(TARGETPATH)\obj\DOMImplementationListImpl.obj \
+    $(TARGETPATH)\obj\DOMImplementationRegistry.obj \
+    $(TARGETPATH)\obj\DOMStringListImpl.obj \
+    $(TARGETPATH)\obj\DOMLSParserImpl.obj \
+    $(TARGETPATH)\obj\DOMLSSerializerImpl.obj \
+    $(TARGETPATH)\obj\DOMLSInputImpl.obj \
+    $(TARGETPATH)\obj\DOMLSOutputImpl.obj \
+    $(TARGETPATH)\obj\DOMLSException.obj \
+    $(TARGETPATH)\obj\Wrapper4InputSource.obj \
+    $(TARGETPATH)\obj\Wrapper4DOMLSInput.obj \
+    $(TARGETPATH)\obj\DOMLocatorImpl.obj \
+    $(TARGETPATH)\obj\DOMErrorImpl.obj \
+    $(TARGETPATH)\obj\MemBufFormatTarget.obj \
+    $(TARGETPATH)\obj\StdOutFormatTarget.obj \
+    $(TARGETPATH)\obj\LocalFileFormatTarget.obj \
+    $(TARGETPATH)\obj\XMLChar.obj \
+    $(TARGETPATH)\obj\XMLMsgLoader.obj \
+    $(TARGETPATH)\obj\DGXMLScanner.obj \
+    $(TARGETPATH)\obj\IGXMLScanner.obj \
+    $(TARGETPATH)\obj\IGXMLScanner2.obj \
+    $(TARGETPATH)\obj\SGXMLScanner.obj \
+    $(TARGETPATH)\obj\WFXMLScanner.obj \
+    $(TARGETPATH)\obj\XMLScannerResolver.obj \
+    $(TARGETPATH)\obj\DOMTypeInfoImpl.obj \
+    $(TARGETPATH)\obj\DOMConfigurationImpl.obj \
+    $(TARGETPATH)\obj\XMemory.obj \
+    $(TARGETPATH)\obj\DOMNormalizer.obj \
+    $(TARGETPATH)\obj\MemoryManagerImpl.obj \
+    $(TARGETPATH)\obj\XMLGrammarPoolImpl.obj \
+    $(TARGETPATH)\obj\XMLDTDDescriptionImpl.obj \
+    $(TARGETPATH)\obj\XMLSchemaDescriptionImpl.obj \
+    $(TARGETPATH)\obj\PSVIAttribute.obj \
+    $(TARGETPATH)\obj\PSVIAttributeList.obj \
+    $(TARGETPATH)\obj\PSVIElement.obj \
+    $(TARGETPATH)\obj\PSVIItem.obj \
+    $(TARGETPATH)\obj\XSAnnotation.obj \
+    $(TARGETPATH)\obj\XSAttributeDeclaration.obj \
+    $(TARGETPATH)\obj\XSAttributeGroupDefinition.obj \
+    $(TARGETPATH)\obj\XSAttributeUse.obj \
+    $(TARGETPATH)\obj\XSComplexTypeDefinition.obj \
+    $(TARGETPATH)\obj\XSElementDeclaration.obj \
+    $(TARGETPATH)\obj\XSFacet.obj \
+    $(TARGETPATH)\obj\XSIDCDefinition.obj \
+    $(TARGETPATH)\obj\XSModel.obj \
+    $(TARGETPATH)\obj\XSModelGroup.obj \
+    $(TARGETPATH)\obj\XSModelGroupDefinition.obj \
+    $(TARGETPATH)\obj\XSMultiValueFacet.obj \
+    $(TARGETPATH)\obj\XSNamespaceItem.obj \
+    $(TARGETPATH)\obj\XSNotationDeclaration.obj \
+    $(TARGETPATH)\obj\XSObject.obj \
+    $(TARGETPATH)\obj\XSParticle.obj \
+    $(TARGETPATH)\obj\XSSimpleTypeDefinition.obj \
+    $(TARGETPATH)\obj\XSTypeDefinition.obj \
+    $(TARGETPATH)\obj\XSWildcard.obj \
+    $(TARGETPATH)\obj\XProtoType.obj \
+    $(TARGETPATH)\obj\XSerializeEngine.obj \
+    $(TARGETPATH)\obj\XTemplateSerializer.obj \
+    $(TARGETPATH)\obj\ValidationContextImpl.obj \
+    $(TARGETPATH)\obj\XMLRefInfo.obj \
+    $(TARGETPATH)\obj\XMLAttDefList.obj \
+    $(TARGETPATH)\obj\XMLGrammarDescription.obj \
+    $(TARGETPATH)\obj\Grammar.obj \
+    $(TARGETPATH)\obj\SynchronizedStringPool.obj \
+    $(TARGETPATH)\obj\DTDEntityDecl.obj \
+    $(TARGETPATH)\obj\XMLDTDDescription.obj \
+    $(TARGETPATH)\obj\XMLSchemaDescription.obj \
+    $(TARGETPATH)\obj\BinFileOutputStream.obj \
+    $(TARGETPATH)\obj\BinOutputStream.obj \
+    $(TARGETPATH)\obj\DOMXPathException.obj \
+    $(TARGETPATH)\obj\XSObjectFactory.obj \
+    $(TARGETPATH)\obj\XMLIBM1047Transcoder.obj \
+    $(TARGETPATH)\obj\XMLCanRepGroup.obj \
+    $(TARGETPATH)\obj\BinMemOutputStream.obj \
+    $(TARGETPATH)\obj\XSValue.obj \
+    $(TARGETPATH)\obj\IdentityConstraintHandler.obj \
+    $(TARGETPATH)\obj\XSAXMLScanner.obj \
+    $(TARGETPATH)\obj\XMLInitializer.obj \
+    $(TARGETPATH)\obj\WindowsFileMgr.obj \
+    $(TARGETPATH)\obj\WindowsMutexMgr.obj \
+    $(TARGETPATH)\obj\DOMXPathExpressionImpl.obj \
+    $(TARGETPATH)\obj\DOMXPathNSResolverImpl.obj \
+    $(TARGETPATH)\obj\DOMXPathResultImpl.obj \
+    $(TARGETPATH)\obj\XIncludeDOMDocumentProcessor.obj \
+    $(TARGETPATH)\obj\XIncludeLocation.obj \
+    $(TARGETPATH)\obj\XIncludeUtils.obj
+RESFILES = 
+MAINSOURCE = XercesLib.cpp
+RESDEPEN = $(RESFILES)
+LIBFILES =
+IDLFILES =
+IDLGENFILES =
+LIBRARIES =
+SPARELIBS =
+DEFFILE =
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\..\..\..\..\src\xercesc\dom;..\..\..\..\..\src\xercesc\dom\impl;..\..\..\..\..\src\xercesc\framework;..\..\..\..\..\src\xercesc\framework\psvi;..\..\..\..\..\src\xercesc\internal;..\..\..\..\..\src\xercesc\parsers;..\..\..\..\..\src\xercesc\sax;..\..\..\..\..\src\xercesc\sax2;..\..\..\..\..\src\xercesc\util;..\..\..\..\..\src\xercesc\util\MsgLoaders\InMemory;..\..\..\..\..\src\xercesc\util\NetAccessors;..\..\..\..\..\src\xercesc\util\NetAccessors\WinSock;..\..\..\..\..\src\xercesc\util\FileManagers;..\..\..\..\..\src\xercesc\util\MutexManagers;..\..\..\..\..\src\xercesc\util\regx;..\..\..\..\..\src\xercesc\util\Transcoders\Win32;..\..\..\..\..\src\xercesc\validators\common;..\..\..\..\..\src\xercesc\validators\datatype;..\..\..\..\..\src\xercesc\validators\DTD;..\..\..\..\..\src\xercesc\validators\schema;..\..\..\..\..\src\xercesc\validators\schema\identity;..\..\..\..\..\src\xercesc\xinclude;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;..\..\..\..\..\src\xercesc\util\Platforms\Win32
+!if !$d(WITHASM)
+XERCES_NO_ASM=;XERCES_NO_ASM
+!endif
+USERDEFINES = _DEBUG;XERCES_BUILDING_LIBRARY;XERCES_USE_FILEMGR_WINDOWS=1;XERCES_USE_MUTEXMGR_WINDOWS=1;XERCES_USE_NETACCESSOR_WINSOCK=1;XERCES_USE_MSGLOADER_INMEMORY=1;XERCES_USE_TRANSCODER_WINDOWS=1;XERCES_PATH_DELIMITER_BACKSLASH=1;HAVE_LIMITS_H=1;HAVE_SYS_TIMEB_H=1;HAVE_FTIME=1;HAVE_STRICMP=1;HAVE_STRNICMP=1;HAVE_WCSUPR=0;HAVE_WCSLWR=0;HAVE_WCSICMP=0;HAVE_WCSNICMP=0;$(XERCES_NO_ASM)
+SYSDEFINES = NO_STRICT;_NO_VCL;_RTLDLL
+INCLUDEPATH = ..\..\..\..\..\src;..\..\..\..\..\src\xercesc\dom;..\..\..\..\..\src\xercesc\framework;..\..\..\..\..\src\xercesc\framework\psvi;..\..\..\..\..\src\xercesc\internal;..\..\..\..\..\src\xercesc\parsers;..\..\..\..\..\src\xercesc\sax;..\..\..\..\..\src\xercesc\sax2;..\..\..\..\..\src\xercesc\util;..\..\..\..\..\src\xercesc\util\MsgLoaders\Win32;..\..\..\..\..\src\xercesc\util\NetAccessors;..\..\..\..\..\src\xercesc\util\NetAccessors\WinSock;..\..\..\..\..\src\xercesc\util\regx;..\..\..\..\..\src\xercesc\util\Transcoders\Win32;..\..\..\..\..\src\xercesc\validators\common;..\..\..\..\..\src\xercesc\validators\datatype;..\..\..\..\..\src\xercesc\validators\DTD;..\..\..\..\..\src\xercesc\validators\schema;..\..\..\..\..\src\xercesc\validators\schema\identity;..\..\..\..\..\src\xercesc\xinclude;
+LIBPATH = ..\..\..\..\..\src\xercesc\dom;..\..\..\..\..\src\xercesc\framework;..\..\..\..\..\src\xercesc\internal;..\..\..\..\..\src\xercesc\parsers;..\..\..\..\..\src\xercesc\sax;..\..\..\..\..\src\xercesc\sax2;..\..\..\..\..\src\xercesc\util;..\..\..\..\..\src\xercesc\util\MsgLoaders\Win32;..\..\..\..\..\src\xercesc\util\NetAccessors;..\..\..\..\..\src\xercesc\util\NetAccessors\WinSock;..\..\..\..\..\src\xercesc\util\regx;..\..\..\..\..\src\xercesc\util\Transcoders\Win32;..\..\..\..\..\src\xercesc\validators\common;..\..\..\..\..\src\xercesc\validators\datatype;..\..\..\..\..\src\xercesc\validators\DTD;..\..\..\..\..\src\xercesc\validators\schema;..\..\..\..\..\src\xercesc\validators\schema\identity;..\..\..\..\..\src\xercesc\xinclude;
+WARNINGS= -w-par
+# ---------------------------------------------------------------------------
+CFLAG1 = -tWD -Od -Vx -Ve -X- -r- -a8 -4 -b -k -y -v -vi- -c -tWM
+IDLCFLAGS =
+PFLAGS = -N2$(TARGETPATH)\obj \
+    -N0$(TARGETPATH)\obj -$YD -$W -$O- -v -JPHNE -M
+RFLAGS =
+AFLAGS = /mx /w2 /zd
+LFLAGS = -l"$(TARGETPATH)\" -I$(TARGETPATH)\obj \
+    -D"" -aa -Tpd -x -Gn -Gi -v
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+

projects/Win32/BCC.551/Xerces-all/readme.txt

@@ -0,0 +1,26 @@
+Sep 30, 2004 - Xerces C and Borland C++ Compiler v 5.6.2 (CBuilderX 1.0 Update 1)
+========================================================
+
+The Update 1 for CBuilderX 1.0 renames the make.exe found in the bin directory 
+to bmake.exe, and adds make.exe (from GNU). To be able to compile Xerces 
+rename bmake.exe back to make.exe
+
+Feb 27, 2003 - Xerces C and Borland C++ Compiler v 5.5.1
+========================================================
+
+ - changes for Xerces C 2.2.0
+
+How to build dll with Win95 support (tasm32 required, so only for BCB5):
+	make -f Xerces-all.mak -DWITHASM=Y
+
+Aug 23, 2002 - Xerces C and Borland C++ Compiler v 5.5.1
+========================================================
+
+Before build:
+	MakeBuildDirs.bat
+
+How to build dll (without deprecated DOM API) and tests:
+	make -f Xerces-all.mak
+
+Vitaly Prapirny (marl@mebius.net)
+