diff --git a/lib/SDRAM/ddr_sdr_v1_5/src/sdr_phy_virtex4.vhd b/lib/SDRAM/ddr_sdr_v1_5/src/sdr_phy_virtex4.vhd
index 7d167f2..5dbcc71 100644
--- a/lib/SDRAM/ddr_sdr_v1_5/src/sdr_phy_virtex4.vhd
+++ b/lib/SDRAM/ddr_sdr_v1_5/src/sdr_phy_virtex4.vhd
@@ -65,7 +65,6 @@ architecture tech of sdram_phy is
 	signal data_reg_r		: unsigned(BUS_DATA_WIDTH-1 downto 0);
 	signal part_ctrl_reg	: part_ctrl_t;
 	signal we_reg			: std_logic;
-	signal read_en			: std_logic;
 	
 	signal clk0				: std_logic;
 	signal clk0_s			: std_logic;
@@ -151,20 +150,7 @@ DATA_DRIVE_GEN:
 	process(clk0)
 	begin
 		if falling_edge(clk0) then
-			drive 		<= we_reg;
-		end if;
-	end process;
-
-DQS_DRIVE_GEN:
-	process(clk0)
-	variable p : unsigned(1 downto 0);
-	begin
-		if rising_edge(clk0) then
-			if phy_ctrl.drive_en = '1' then
-				p := (others => '1');
-			else
-				p := p(p'left-1 downto 0) & '0';
-			end if;
+			drive 		<= phy_ctrl.drive_en;
 		end if;
 	end process;
 
@@ -239,7 +225,6 @@ misc_flags_and_data_out:
 		if rising_edge(clk0) then
 			if rst0 = '1' then
 				p					:= (others => '0');
-				read_en				<= '0';
 				phy_out.rd_data_we	<= '0';
 				phy_out.wr_data_re	<= '0';
 			else
@@ -252,7 +237,6 @@ misc_flags_and_data_out:
 				end if;	
 				phy_out.wr_data_re	<= phy_ctrl.we;
 				phy_out.rd_data_we	<= p(3);
-				read_en				<= p(1);
 				if phy_ctrl.re = '1' then
 					p := p(p'left-1 downto 0) & '1';
 				else
diff --git a/lib/SDRAM/ddr_sdr_v1_5/src/sdram_config_mt48lc16m16.vhd b/lib/SDRAM/ddr_sdr_v1_5/src/sdram_config_mt48lc16m16.vhd
index f397a38..77dac52 100644
--- a/lib/SDRAM/ddr_sdr_v1_5/src/sdram_config_mt48lc16m16.vhd
+++ b/lib/SDRAM/ddr_sdr_v1_5/src/sdram_config_mt48lc16m16.vhd
@@ -64,7 +64,7 @@ package sdram_config is
 	-- These values are for your SDRAM part (see datasheet) 
 	constant TCAS : positive	:= 2;			-- CAS latency [clocks]
 	constant TRP  : real		:= 20.0;		-- precharge command period [ns]
-	constant TRAS : real		:= 45.0;		-- active to precharge delay [ns]
+	constant TRAS : real		:= 50.0;		-- active to precharge delay [ns]
 	constant TRFC : real		:= 75.0;		-- auto refresh command period [ns]
 	constant TMRD : positive	:= 2;			-- load mode register command cylce time [clocks]
 	constant TRCD : real		:= 20.0;		-- active to read or write delay [ns]