From 01b998de2110dd90d6727ab85a52a6e6ef7a1910 Mon Sep 17 00:00:00 2001 From: Jens Ahrensfeld Date: Thu, 24 Jul 2014 06:46:07 +0000 Subject: [PATCH] - added - simulation clean git-svn-id: http://moon:8086/svn/vhdl/trunk@1067 cc03376c-175c-47c8-b038-4cd826a8556b --- lib/radio/decimator/CIC/sim/ModelSim SE .lnk | Bin 0 -> 1384 bytes lib/radio/decimator/CIC/sim/modelsim.ini | 784 +++++++++++++++++++ 2 files changed, 784 insertions(+) create mode 100644 lib/radio/decimator/CIC/sim/ModelSim SE .lnk create mode 100644 lib/radio/decimator/CIC/sim/modelsim.ini diff --git a/lib/radio/decimator/CIC/sim/ModelSim SE .lnk b/lib/radio/decimator/CIC/sim/ModelSim SE .lnk new file mode 100644 index 0000000000000000000000000000000000000000..e8bf5850b3601c98664fef5b133790abe51788a1 GIT binary patch literal 1384 zcmdT^T}V@57=GrFP%u*3MTxT!34o=u-|u_>p6}s&rwM?; zn86j8)K(n1#;uut>-;YFT*i!{cxWzX?EXswfU!FM|>N>wW zSIdmd^Pn5;2%-ypTm$HUA62kHrVr%PPj@@RZqZPrT*m%Qeez_{CyEdvC}$lAw@FxD zC%-b^XGXZYJ=oP73fqFQAYj+4PZLFdrKk?;D0=xo=rANn_)2z1IFURhP*R#r!$ti#|fki%HZn|KP}hfeWij zT$VDihv(vt(9H8X+O$-o8k6Kj#L~XHVv=J0YtcA$c-bU9V$IvaLz@4QR@90aJJU^& zjZx(dj1yQT! _ +; SVCoverpointExprVariablePrefix = expr + +[sccom] +; Enable use of SCV include files and library. Default is off. +; UseScv = 1 + +; Add C++ compiler options to the sccom command line by using this variable. +; CppOptions = -g + +; Use custom C++ compiler located at this path rather than the default path. +; The path should point directly at a compiler executable. +; CppPath = /usr/bin/g++ + +; Enable verbose messages from sccom. Default is off. +; SccomVerbose = 1 + +; sccom logfile. Default is no logfile. +; SccomLogfile = sccom.log + +; Enable use of SC_MS include files and library. Default is off. +; UseScMs = 1 + +[vsim] + +; vopt flow +; Set to turn on automatic optimization of a design. +; Default is on +VoptFlow = 1 + +; vopt automatic SDF +; If automatic design optimization is on, enables automatic compilation +; of SDF files. +; Default is on, uncomment to turn off. +; VoptAutoSDFCompile = 0 + +; Simulator resolution +; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100. +Resolution = ns + +; User time unit for run commands +; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the +; unit specified for Resolution. For example, if Resolution is 100ps, +; then UserTimeUnit defaults to ps. +; Should generally be set to default. +UserTimeUnit = default + +; Default run length +RunLength = 100 + +; Maximum iterations that can be run without advancing simulation time +IterationLimit = 5000 + +; Control PSL and Verilog Assume directives during simulation +; Set SimulateAssumeDirectives = 0 to disable assume being simulated as asserts +; Set SimulateAssumeDirectives = 1 to enable assume simulation as asserts +; SimulateAssumeDirectives = 1 + +; Control the simulation of PSL and SVA +; These switches can be overridden by the vsim command line switches: +; -psl, -nopsl, -sva, -nosva. +; Set SimulatePSL = 0 to disable PSL simulation +; Set SimulatePSL = 1 to enable PSL simulation (default) +; SimulatePSL = 1 +; Set SimulateSVA = 0 to disable SVA simulation +; Set SimulateSVA = 1 to enable concurrent SVA simulation (default) +; SimulateSVA = 1 + +; Directives to license manager can be set either as single value or as +; space separated multi-values: +; vhdl Immediately reserve a VHDL license +; vlog Immediately reserve a Verilog license +; plus Immediately reserve a VHDL and Verilog license +; nomgc Do not look for Mentor Graphics Licenses +; nomti Do not look for Model Technology Licenses +; noqueue Do not wait in the license queue when a license is not available +; viewsim Try for viewer license but accept simulator license(s) instead +; of queuing for viewer license (PE ONLY) +; noviewer Disable checkout of msimviewer and vsim-viewer license +; features (PE ONLY) +; noslvhdl Disable checkout of qhsimvh and vsim license features +; noslvlog Disable checkout of qhsimvl and vsimvlog license features +; nomix Disable checkout of msimhdlmix and hdlmix license features +; nolnl Disable checkout of msimhdlsim and hdlsim license features +; mixedonly Disable checkout of qhsimvh,qhsimvl,vsim,vsimvlog license +; features +; lnlonly Disable checkout of qhsimvh,qhsimvl,vsim,vsimvlog,msimhdlmix, +; hdlmix license features +; Single value: +; License = plus +; Multi-value: +; License = noqueue plus + +; Stop the simulator after a VHDL/Verilog immediate assertion message +; 0 = Note 1 = Warning 2 = Error 3 = Failure 4 = Fatal +BreakOnAssertion = 3 + +; VHDL assertion Message Format +; %S - Severity Level +; %R - Report Message +; %T - Time of assertion +; %D - Delta +; %I - Instance or Region pathname (if available) +; %i - Instance pathname with process +; %O - Process name +; %K - Kind of object path is to return: Instance, Signal, Process or Unknown +; %P - Instance or Region path without leaf process +; %F - File +; %L - Line number of assertion or, if assertion is in a subprogram, line +; from which the call is made +; %% - Print '%' character +; If specific format for assertion level is defined, use its format. +; If specific format is not defined for assertion level: +; - and if failure occurs during elaboration, use AssertionFormatBreakLine; +; - and if assertion triggers a breakpoint (controlled by BreakOnAssertion +; level), use AssertionFormatBreak; +; - otherwise, use AssertionFormat. +; AssertionFormatBreakLine = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F Line: %L\n" +; AssertionFormatBreak = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F\n" +; AssertionFormat = "** %S: %R\n Time: %T Iteration: %D%I\n" +; AssertionFormatNote = "** %S: %R\n Time: %T Iteration: %D%I\n" +; AssertionFormatWarning = "** %S: %R\n Time: %T Iteration: %D%I\n" +; AssertionFormatError = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F\n" +; AssertionFormatFail = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F\n" +; AssertionFormatFatal = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F\n" + +; Assertion File - alternate file for storing VHDL/PSL/Verilog assertion messages +; AssertFile = assert.log + + +; Simulation Breakpoint messages +; This flag controls the display of function names when reporting the location +; where the simulator stops do to a breakpoint or fatal error. +; Example w/function name: # Break in Process ctr at counter.vhd line 44 +; Example wo/function name: # Break at counter.vhd line 44 +ShowFunctions = 1 + + +; Default radix for all windows and commands. +; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned +DefaultRadix = symbolic + +; VSIM Startup command +; Startup = do startup.do + +; File for saving command transcript +TranscriptFile = transcript + +; File for saving command history +; CommandHistory = cmdhist.log + +; Specify whether paths in simulator commands should be described +; in VHDL or Verilog format. +; For VHDL, PathSeparator = / +; For Verilog, PathSeparator = . +; Must not be the same character as DatasetSeparator. +PathSeparator = / + +; Specify the dataset separator for fully rooted contexts. +; The default is ':'. For example: sim:/top +; Must not be the same character as PathSeparator. +DatasetSeparator = : + +; Specify a unique path separator for the Signal Spy set of functions. +; The default will be to use the PathSeparator variable. +; Must not be the same character as DatasetSeparator. +; SignalSpyPathSeparator = / + +; Disable VHDL assertion messages +; IgnoreNote = 1 +; IgnoreWarning = 1 +; IgnoreError = 1 +; IgnoreFailure = 1 + +; Disable System Verilog assertion messages +; Info and Warning are disabled by default +; IgnoreSVAInfo = 0 +; IgnoreSVAWarning = 0 +; IgnoreSVAError = 1 +; IgnoreSVAFatal = 1 + +; Default force kind. May be freeze, drive, deposit, or default +; or in other terms, fixed, wired, or charged. +; A value of "default" will use the signal kind to determine the +; force kind, drive for resolved signals, freeze for unresolved signals +; DefaultForceKind = freeze + +; If zero, open files when elaborated; otherwise, open files on +; first read or write. Default is 0. +; DelayFileOpen = 1 + +; Control VHDL files opened for write. +; 0 = Buffered, 1 = Unbuffered +UnbufferedOutput = 0 + +; Control the number of VHDL files open concurrently. +; This number should always be less than the current ulimit +; setting for max file descriptors. +; 0 = unlimited +ConcurrentFileLimit = 40 + +; Control the number of hierarchical regions displayed as +; part of a signal name shown in the Wave window. +; A value of zero tells VSIM to display the full name. +; The default is 0. +; WaveSignalNameWidth = 0 + +; Turn off warnings when changing VHDL constants and generics +; Default is 1 to generate warning messages +; WarnConstantChange = 0 + +; Turn off warnings from the std_logic_arith, std_logic_unsigned +; and std_logic_signed packages. +; StdArithNoWarnings = 1 + +; Turn off warnings from the IEEE numeric_std and numeric_bit packages. +; NumericStdNoWarnings = 1 + +; Control the format of the (VHDL) FOR generate statement label +; for each iteration. Do not quote it. +; The format string here must contain the conversion codes %s and %d, +; in that order, and no other conversion codes. The %s represents +; the generate_label; the %d represents the generate parameter value +; at a particular generate iteration (this is the position number if +; the generate parameter is of an enumeration type). Embedded whitespace +; is allowed (but discouraged); leading and trailing whitespace is ignored. +; Application of the format must result in a unique scope name over all +; such names in the design so that name lookup can function properly. +; GenerateFormat = %s__%d + +; Specify whether checkpoint files should be compressed. +; The default is 1 (compressed). +; CheckpointCompressMode = 0 + +; Specify whether to enable SystemVerilog DPI out-of-the-blue call. +; Out-of-the-blue call refers to a SystemVerilog export function call +; directly from a C function that don't have the proper context setup +; as done in DPI-C import C functions. When this is enabled, one can +; call a DPI export function (but not task) from any C code. +; The default is 0 (disabled). +; DpiOutOfTheBlue = 1 + +; List of dynamically loaded objects for Verilog PLI applications +; Veriuser = veriuser.sl + +; Specify default options for the restart command. Options can be one +; or more of: -force -nobreakpoint -nolist -nolog -nowave -noassertions +; DefaultRestartOptions = -force + +; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs +; (> 500 megabyte memory footprint). Default is disabled. +; Specify number of megabytes to lock. +; LockedMemory = 1000 + +; HP-UX 11.00 ONLY - Use /usr/lib/libCsup_v2.sl for shared object loading. +; This is necessary when C++ files have been compiled with aCC's -AA option. +; The default behavior is to use /usr/lib/libCsup.sl. +; UseCsupV2 = 1 + +; Turn on (1) or off (0) WLF file compression. +; The default is 1 (compress WLF file). +; WLFCompress = 0 + +; Specify whether to save all design hierarchy (1) in the WLF file +; or only regions containing logged signals (0). +; The default is 0 (save only regions with logged signals). +; WLFSaveAllRegions = 1 + +; WLF file time limit. Limit WLF file by time, as closely as possible, +; to the specified amount of simulation time. When the limit is exceeded +; the earliest times get truncated from the file. +; If both time and size limits are specified the most restrictive is used. +; UserTimeUnits are used if time units are not specified. +; The default is 0 (no limit). Example: WLFTimeLimit = {100 ms} +; WLFTimeLimit = 0 + +; WLF file size limit. Limit WLF file size, as closely as possible, +; to the specified number of megabytes. If both time and size limits +; are specified then the most restrictive is used. +; The default is 0 (no limit). +; WLFSizeLimit = 1000 + +; Specify whether or not a WLF file should be deleted when the +; simulation ends. A value of 1 will cause the WLF file to be deleted. +; The default is 0 (do not delete WLF file when simulation ends). +; WLFDeleteOnQuit = 1 + +; Specify whether or not a WLF file should be optimized during +; simulation. If set to 0, the WLF file will not be optimized. +; The default is 1, optimize the WLF file. +; WLFOptimize = 0 + +; Specify the name of the WLF file. +; The default is vsim.wlf +; WLFFilename = vsim.wlf + +; WLF reader cache size limit. Specifies the internal WLF file cache size, +; in megabytes, for EACH open WLF file. A value of 0 turns off the +; WLF cache. +; The default setting is enabled to 256M per open WLF file. +; WLFCacheSize = 1000 + +; Specify the WLF file event collapse mode. +; 0 = Preserve all events and event order. (same as -wlfnocollapse) +; 1 = Only record values of logged objects at the end of a simulator iteration. +; (same as -wlfcollapsedelta) +; 2 = Only record values of logged objects at the end of a simulator time step. +; (same as -wlfcollapsetime) +; The default is 1. +; WLFCollapseMode = 0 + +; Turn on/off undebuggable SystemC type warnings. Default is on. +; ShowUndebuggableScTypeWarning = 0 + +; Turn on/off unassociated SystemC name warnings. Default is off. +; ShowUnassociatedScNameWarning = 1 + +; Set SystemC default time unit. +; Set to fs, ps, ns, us, ms, or sec with optional +; prefix of 1, 10, or 100. The default is 1 ns. +; The ScTimeUnit value is honored if it is coarser than Resolution. +; If ScTimeUnit is finer than Resolution, it is set to the value +; of Resolution. For example, if Resolution is 100ps and ScTimeUnit is ns, +; then the default time unit will be 1 ns. However if Resolution +; is 10 ns and ScTimeUnit is ns, then the default time unit will be 10 ns. +ScTimeUnit = ns + +; Set the SCV relationship name that will be used to identify phase +; relations. If the name given to a transactor relation matches this +; name, the transactions involved will be treated as phase transactions +ScvPhaseRelationName = mti_phase + + +; Do not exit when executing sc_stop(). +; If this is enabled, the control will be returned to the user before exiting +; the simulation. This can make some cleanup tasks easier before kernel exits. +; The default is off. +; NoExitOnScStop = 1 + +; Run simulator in assertion debug mode. Default is off. +; AssertionDebug = 1 + +; Turn on/off PSL/SVA concurrent assertion pass enable. Default is on. +; AssertionPassEnable = 0 + +; Turn on/off PSL/SVA concurrent assertion fail enable. Default is on. +; AssertionFailEnable = 0 + +; Set PSL/SVA concurrent assertion pass limit. Default is -1. +; Any positive integer, -1 for infinity. +; AssertionPassLimit = 1 + +; Set PSL/SVA concurrent assertion fail limit. Default is -1. +; Any positive integer, -1 for infinity. +; AssertionFailLimit = 1 + +; Turn on/off PSL concurrent assertion pass log. Default is off. +; The flag does not affect SVA +; AssertionPassLog = 1 + +; Turn on/off PSL concurrent assertion fail log. Default is on. +; The flag does not affect SVA +; AssertionFailLog = 0 + +; Set action type for PSL/SVA concurrent assertion fail action. Default is continue. +; 0 = Continue 1 = Break 2 = Exit +; AssertionFailAction = 1 + +; Turn on/off code coverage +; CodeCoverage = 0 + +; Count all code coverage condition and expression truth table rows that match. +; CoverCountAll = 1 + +; Turn on/off all PSL/SVA cover directive enables. Default is on. +; CoverEnable = 0 + +; Turn on/off PSL/SVA cover log. Default is off. +; CoverLog = 1 + +; Set "at_least" value for all PSL/SVA cover directives. Default is 1. +; CoverAtLeast = 2 + +; Set "limit" value for all PSL/SVA cover directives. Default is -1. +; Any positive integer, -1 for infinity. +; CoverLimit = 1 + +; Specify the coverage database filename. Default is "" (i.e. database is NOT automatically saved on close). +; UCDBFilename = vsim.ucdb + +; Specify the maximum limit for the number of Cross (bin) products reported +; in XML and UCDB report against a Cross. A warning is issued if the limit +; is crossed. +; MaxReportRhsSVCrossProducts = 1000 + +; Specify the override for the "auto_bin_max" option for the Covergroups. +; If not specified then value from Covergroup "option" is used. +; SVCoverpointAutoBinMax = 64 + +; Specify the override for the value of "cross_num_print_missing" +; option for the Cross in Covergroups. If not specified then value +; specified in the "option.cross_num_print_missing" is used. This +; is a runtime option. NOTE: This overrides any "cross_num_print_missing" +; value specified by user in source file and any SVCrossNumPrintMissingDefault +; specified in modelsim.ini. +; SVCrossNumPrintMissing = 0 + +; Set weight for all PSL/SVA cover directives. Default is 1. +; CoverWeight = 2 + +; Check vsim plusargs. Default is 0 (off). +; 0 = Don't check plusargs +; 1 = Warning on unrecognized plusarg +; 2 = Error and exit on unrecognized plusarg +; CheckPlusargs = 1 + +; Load the specified shared objects with the RTLD_GLOBAL flag. +; This gives global visibility to all symbols in the shared objects, +; meaning that subsequently loaded shared objects can bind to symbols +; in the global shared objects. The list of shared objects should +; be whitespace delimited. This option is not supported on the +; Windows or AIX platforms. +; GlobalSharedObjectList = example1.so example2.so example3.so + +; Run the 0in tools from within the simulator. +; Default value set to 0. Please set it to 1 to invoke 0in. +; VsimZeroIn = 1 + +; Set the options to be passed to the 0in tools. +; Default value set to "". Please set it to appropriate options needed. +; VsimZeroInOptions = "" + +; Initial seed for the Random Number Generator (RNG) of the root thread (SystemVerilog). +; Sv_Seed = 0 + +; Maximum size of dynamic arrays that are resized during randomize(). +; The default is 1000. A value of 0 indicates no limit. +; SolveArrayResizeMax = 1000 + +; Error message severity when randomize() failure is detected (SystemVerilog). +; The default is 0 (no error). +; 0 = No error 1 = Warning 2 = Error 3 = Failure 4 = Fatal +; SolveFailSeverity = 0 + +; Enable/disable debug information for randomize() failures (SystemVerilog). +; The default is 0 (disabled). Set to 1 to enable. +; SolveFailDebug = 0 + +; When SolveFailDebug is enabled, this value specifies the maximum number of +; constraint subsets that will be tested for conflicts. +; The default is 0 (no limit). +; SolveFailDebugLimit = 0 + +; When SolveFailDebug is eanbled, this value specifies the maximum size of +; constraint subsets that will be tested for conflicts. +; The default value is 0 (no limit). +; SolveFailDebugMaxSet = 0 + +; Specify random sequence compatiblity with a prior letter release. This +; option is used to get the same random sequences during simulation as +; as a prior letter release. Only prior letter releases (of the current +; number release) are allowed. +; Note: To achieve the same random sequences, solver optimizations and/or +; bug fixes introduced since the specified release may be disabled - +; yielding the performance / behavior of the prior release. +; Default value set to "" (random compatibility not required). +; SolveRev = "" + +; Environment variable expansion of command line arguments has been depricated +; in favor shell level expansion. Universal environment variable expansion +; inside -f files is support and continued support for MGC Location Maps provide +; alternative methods for handling flexible pathnames. +; The following line may be uncommented and the value set to 1 to re-enable this +; deprecated behavior. The default value is 0. +; DeprecatedEnvironmentVariableExpansion = 0 + +; Retroactive Recording uses a limited number of private data channels in the WLF +; file. Too many channels degrade WLF performance. If the limit is reached, +; simulation ends with a fatal error. You may change this limit as needed, but be +; aware of the implications of too many channels. The value must be an integer +; greater than or equal to zero, where zero disables all retroactive recording. +; RetroChannelLimit = 20 + +; Options to give vopt when code coverage is turned on. +; Default is "+acc=lprnb -opt=-merge -opt=-suppressAlways" +; VoptCoverageOptions = +acc=lprnb -opt=-merge -opt=-suppressAlways + +[lmc] +; The simulator's interface to Logic Modeling's SmartModel SWIFT software +libsm = $MODEL_TECH/libsm.sl +; The simulator's interface to Logic Modeling's SmartModel SWIFT software (Windows NT) +; libsm = $MODEL_TECH/libsm.dll +; Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700) +; libswift = $LMC_HOME/lib/hp700.lib/libswift.sl +; Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000) +; libswift = $LMC_HOME/lib/ibmrs.lib/swift.o +; Logic Modeling's SmartModel SWIFT software (Sun4 Solaris) +; libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so +; Logic Modeling's SmartModel SWIFT software (Windows NT) +; libswift = $LMC_HOME/lib/pcnt.lib/libswift.dll +; Logic Modeling's SmartModel SWIFT software (Linux) +; libswift = $LMC_HOME/lib/x86_linux.lib/libswift.so + +; The simulator's interface to Logic Modeling's hardware modeler SFI software +libhm = $MODEL_TECH/libhm.sl +; The simulator's interface to Logic Modeling's hardware modeler SFI software (Windows NT) +; libhm = $MODEL_TECH/libhm.dll +; Logic Modeling's hardware modeler SFI software (HP 9000 Series 700) +; libsfi = /lib/hp700/libsfi.sl +; Logic Modeling's hardware modeler SFI software (IBM RISC System/6000) +; libsfi = /lib/rs6000/libsfi.a +; Logic Modeling's hardware modeler SFI software (Sun4 Solaris) +; libsfi = /lib/sun4.solaris/libsfi.so +; Logic Modeling's hardware modeler SFI software (Windows NT) +; libsfi = /lib/pcnt/lm_sfi.dll +; Logic Modeling's hardware modeler SFI software (Linux) +; libsfi = /lib/linux/libsfi.so + +[msg_system] +; Change a message severity or suppress a message. +; The format is: = [,...] +; Examples: +; note = 3009 +; warning = 3033 +; error = 3010,3016 +; fatal = 3016,3033 +; suppress = 3009,3016,3043 +; The command verror can be used to get the complete +; description of a message. + +; Control transcripting of elaboration/runtime messages. +; The default is to have messages appear in the transcript and +; recorded in the wlf file (messages that are recorded in the +; wlf file can be viewed in the MsgViewer). The other settings +; are to send messages only to the transcript or only to the +; wlf file. The valid values are +; both {default} +; tran {transcript only} +; wlf {wlf file only} +; msgmode = both