-----------------------------------------------------------------
Changes in release 12
-----------------------------------------------------------------
- reworked GCC-toolchain: Valid mips*-elf-binaries are now compiled and linked
  using a single mips*-elf-gcc command.
  To use: Copy $THIS_REALEASE/bsp/toolchain/specs to $MIPS_GCC_PREFIX/lib/gcc/mipsel-elf/$GCC_VERSION/,
  and see bsp/examples/Makefile gcc usage
  GCC-provided crt*-functions are now called without problems.
  In summary: The toolchain is now more compliant to the intentional use of GCC.
- mips_biu.vhd: Addresses 0xA0000000..0xBFFFFFFF are now un-dcached for memory-mapped I/O,
  which is now compliant to literature. 
- gpio_wb.vhd: Timer reset is now removed. This helps to keep current time in case of CPU reset.
- new bsp-example source: gunzip
- updated drawing 'mips_jbus_timing.pdf'
- added drawing 'memory_map.pdf' 
- moved COP0 from mips_pipeline.vhd to mips_top.vhd. Created new cop-interface for later COPz connection.
- added I/D-cache info (size and linesize) to upper 16 bits of PrID-Register.
  Example of reading cache info is done in bsp/examples/testbench::PrintCPUinfo()
- simplified instruction decoder in mips_instr.vhd. Now there are less warnings during synthesis.
  Removed idecode_rom.vhd from project as consequence.
- added cop0 instructions to invalidate I-cache and D-Cache
- added copz instructions lwcz and swcz
- gpio_wb.vhd: added 32 bit timer with interrupt and auto reload
- added debugger in libsys. New files are mipsdis.c/h and dbg.c/h
- exception handlers can now be registered to any exception type 
- bugfix: cop0 registers were not written during exception commit. Cop registers now behave like general registers.
- added pin 'eb' to mips_top.vhd to select CPU-endianess at reset time (eb = 0 : little-endian, eb = 1 : big-endian)
- Status register bit 'RE'= 1 (bit 25) reverses endianess in user-mode
- Status register bit 'TS' (TLB Shutdown, bit 21) is tied high to indicate the absence of a MMU.
- uart_wb.vhd: added interrupt enable

-----------------------------------------------------------------
Changes in release 11
-----------------------------------------------------------------
- bug-fix in mips_pipeline: pc_is_branch is now initialized at reset
  (fixes CPU unrecoverable state after reset)
- reverted "optimization" in mips_dcache, which behaved buggy during exceptions
- new example source: test_exception
- minor changes in libsys
- added async_port_timing in doc
- examples/testbench: date set now really works

-----------------------------------------------------------------
Changes in release 10b
-----------------------------------------------------------------
- fixed compiler bug (missing nop after lw) in bootloader,
  which caused exception during boot

-----------------------------------------------------------------
Changes in release 10a
-----------------------------------------------------------------
async_port_wb:
- added byte enable for async_port

bootloader.c
- fixed compiler bug (missing nop after lw)

mips-core
- SEL_O lines are also asserted correctly during reads

tools/romgen
- TCL-Jtage now compatible with Chipscope 10.1

mips_sys.c
- use byte enable for sram and flash


