changed: change_filament_gcode

system/KlipperS1Pro/machine/KlipperS1Pro_klipper.json

@@ -140,8 +140,9 @@
     "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 X0 Y10 F3000\nG1 Z1.0 F240\nG1 X100 F5000\nG1 Z0.28 F240\nG1 X2.0 E10 F1500 ; prime the nozzle\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X3.3 Y140 F5000\nG92 E0\nG1 X3.3 Y20 E10 F1200 ; prime the nozzle\nG92 E0\n",
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "change_filament_gcode": "M600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-    "machine_pause_gcode": "PAUSE",
+    "machine_pause_gcode": "M25",
     "scan_first_layer": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"