fixed machine_end_gcode

OrcaSlicer.conf

@@ -28,7 +28,7 @@
         "is_split_compound": false,
         "keyboard_supported": "none/alt/control/shift",
         "language": "en_US",
-        "last_backup_path": "/tmp/orcaslicer_model/Sun_Dec_07/17_01_26#2#42",
+        "last_backup_path": "/tmp/orcaslicer_model/Sun_Dec_07/20_49_09#2#42",
         "last_export_path": "/home/jens/Downloads",
         "legacy_networking": true,
         "linear_defletion": "0.003",
@@ -64,7 +64,7 @@
         "show_3d_navigator": true,
         "show_build_edgets": false,
         "show_daily_tips": true,
-        "show_gcode_window": false,
+        "show_gcode_window": true,
         "show_hints": true,
         "show_home_page": true,
         "show_model_mesh": false,
@@ -160,7 +160,7 @@
         {
             "curr_bed_type": "3",
             "filament": "Generic PLA @System",
-            "filament_colors": "#F9F06B",
+            "filament_colors": "#E7CFAC",
             "flush_volumes_matrix": "0.000000",
             "flush_volumes_vector": "140.000000|140.000000",
             "machine": "Creality Ender-3 S1 Pro 0.4 nozzle",
@@ -339,12 +339,12 @@
         },
         {
             "curr_bed_type": "3",
-            "filament": "Bambu PLA Wood @System",
+            "filament": "Generic PLA @System",
             "filament_colors": "#FFFFFF",
             "flush_volumes_matrix": "0.000000",
             "flush_volumes_vector": "140.000000|140.000000",
             "machine": "KlipperS1Pro 0.2 nozzle",
-            "process": "0.20mm Standard Test"
+            "process": "0.08mm"
         },
         {
             "curr_bed_type": "3",

system/KlipperS1Pro/machine/KlipperS1Pro_klipper.json

@@ -138,7 +138,7 @@
         "0x0"
     ],
     "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 X0 Y10 F3000\nG1 Z1.0 F240\nG1 X100 F5000\nG1 Z0.28 F240\nG1 X2.0 E10 F1500 ; prime the nozzle\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X3.3 Y140 F5000\nG92 E0\nG1 X3.3 Y20 E10 F1200 ; prime the nozzle\nG92 E0\n",
-    "machine_end_gcode": "PRINT_END",
+    "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",