brewpi/tasks/sud.py

import asyncio
from tasks import ATask
from ws.message import MsgIo
from utils.value import ChangedFloat
from components import APid, AStirrer
from components.plant import APlant
from components.sud import Sud, SudState


class SudTask(ATask):
	def __init__(self, sud: Sud, tc: APid, stirrer: AStirrer, pot: APlant, dt, interval, msg_handler: MsgIo,
			forecast_estimator=None):
		ATask.__init__(self, interval)
		self.sud = sud
		self.tc = tc
		self.stirrer = stirrer
		self.pot = pot
		# Simulated seconds per tick, vs. interval's wall-clock seconds per
		# tick - same dt/interval split Pot/TempController/Stirrer already
		# use internally. Their warp-induced speedup falls out naturally
		# from ticking real physics at simulated dt; Sud has no physics of
		# its own, so hold_remaining must be ticked by dt explicitly to get
		# the same speedup instead of running in real time.
		self.dt = dt
		self.msg_handler = msg_handler
		# Predicts a schedule's actual duration by simulating it with the
		# same plant/controller machinery this server uses for real - see
		# components/sud_forecast.py. Optional only so tests/demos that
		# build a SudTask without one still work; the server always passes
		# one.
		self.forecast_estimator = forecast_estimator
		msg_handler.set_recv_handler(self.recv)

	def apply_plant_params(self, step):
		"""Keeps the real plant's and the controller's internal model's
		lumped (M, C) in sync with the step's grain_mass/water_mass, since
		those vary over the course of a brew (malt going in, water boiling
		off) - mirrors demo_sud.py's apply_plant_params()."""
		params = self.sud.derive_plant_params(step.get('grain_mass', 0), step.get('water_mass', 0))
		self.pot.set_thermal_params(params['M'], params['C'])
		if hasattr(self.tc, 'set_model_params'):
			self.tc.set_model_params(params['M'], params['C'])

	def apply_stirrer(self, phase):
		stirrer_cfg = phase.get('stirrer', {})
		speed = stirrer_cfg.get('speed', 0)
		interval_time = stirrer_cfg.get('interval_time', 0)
		on_ratio = stirrer_cfg.get('on_ratio', 1.0)
		if interval_time > 0:
			self.stirrer.set_cycle_time(interval_time)
			self.stirrer.set_duty_cycle(on_ratio)
		else:
			self.stirrer.set_cycle_time(1.0)
			self.stirrer.set_duty_cycle(1.0 if speed > 0 else 0.0)
		self.stirrer.set_speed(speed)

	def on_step_changed(self, step):
		ramp = step.get('ramp') if step else None
		hold = step.get('hold') if step else None
		# Every step ramps to 'temperature' first, then optionally holds -
		# self.sud.state tells us which phase is currently active; it's
		# already up to date by the time this callback fires, both on a
		# full step transition and on the ramp->hold phase switch within
		# one step (components/sud.py's temp_reached()).
		ramping = self.sud.state == SudState.RAMPING
		phase = ramp if ramping else hold

		if step is not None:
			self.apply_plant_params(step)
			if ramping and step['temperature'] is not None:
				self.tc.set_theta_soll(step['temperature'])
				self.tc.set_heatrate_soll(ramp['rate'])
			self.apply_stirrer(phase)

		asyncio.create_task(self.send({'Step': {
			'Index': self.sud.index,
			'Type': 'ramp' if ramping else 'hold' if hold is not None else None,
			'Descr': step.get('descr') if step else None,
			'Temp': step.get('temperature') if step else None,
			'Rate': ramp.get('rate') if ramp else None,
			'Duration': hold.get('duration') if (hold is not None and not ramping) else None,
			'WaitForUser': step.get('user_wait_for_continue', False) if step else None,
		}}))
		asyncio.create_task(self.send_remaining_forecast())

	def on_state_changed(self, value):
		asyncio.create_task(self.send({'State': str(value)}))

		if value in (SudState.DONE, SudState.IDLE):
			self.stirrer.set_duty_cycle(1.0)
			self.stirrer.set_speed(0)
			# A finished/stopped run no longer owns the controller - hand
			# control back to manual mode (off by default there too).
			self.tc.set_enabled(False)
		else:
			# Any other state (RAMPING/HOLDING/WAIT_USER/PAUSED) means a
			# run is in progress and needs the controller actively driving
			# the heater.
			self.tc.set_enabled(True)

	def on_user_message_changed(self, value):
		asyncio.create_task(self.send({'UserMessage': value}))

	def on_hold_remaining_changed(self, value):
		asyncio.create_task(self.send({'HoldRemaining': value}))

	def on_elapsed_changed(self, value):
		asyncio.create_task(self.send({'Elapsed': value}))

	async def send_forecast(self, doc):
		if self.forecast_estimator is None:
			return
		# Runs the simulation in a worker thread - it's CPU-bound and can
		# take a couple hundred ms for a long schedule, which would
		# otherwise stall every other task (heater, sensor, ...) for that
		# whole window.
		loop = asyncio.get_event_loop()
		t, theta = await loop.run_in_executor(None, self.forecast_estimator.estimate, doc)
		await self.send({'Forecast': {'T': t, 'Theta': theta}})

	def remaining_schedule(self):
		"""The not-yet-done part of the running schedule - the current
		step's already-finished phase is dropped, and its still-to-run
		phase is left for SudForecastEstimator to size from the live
		start_theta/hold_remaining it's seeded with, rather than the
		step's nominal start. Mirrors client/brewpi_gui.py's
		Window._remaining_schedule(), which does the same thing
		client-side for its own (less accurate) naive fallback."""
		schedule = self.sud.schedule
		index = self.sud.index
		if not schedule or not (0 <= index < len(schedule)):
			return []
		current = schedule[index]
		rest = schedule[index + 1:]
		if self.sud.state == SudState.WAIT_USER:
			return rest
		if self.sud.state == SudState.HOLDING:
			# Keep the rest of the current (already fully-resolved) step -
			# grain_mass/water_mass/etc. - SudForecastEstimator re-resolves
			# each step against an empty default.step, so a bare
			# {'hold': {...}} here would leave those None instead of
			# inherited, breaking derive_plant_params(). The ramp phase is
			# already done, so drop 'temperature' (not 'ramp' - every step
			# always carries a 'ramp' dict now, dropping it would leave
			# 'rate' missing the moment this synthetic step is re-resolved):
			# without a 'temperature' of its own, the rebuilt step pushes
			# no new target, start_theta already seeds the simulation at
			# the target anyway, so it resolves out of its (now synthetic)
			# ramp phase in a tick or two regardless. Override the hold's
			# duration to what's actually left.
			remaining_minutes = max(self.sud.hold_remaining, 0.0) / 60.0
			synthetic = {k: v for k, v in current.items() if k != 'temperature'}
			synthetic['hold'] = {**current.get('hold', {}), 'duration': remaining_minutes}
			return [synthetic] + rest
		return [current] + rest

	async def send_remaining_forecast(self):
		"""Like send_forecast(), but for the remaining steps only, seeded
		from the live current temperature - the dynamic forecast's
		projected-remainder line (GUI's SudForecastPlot.line_projected)
		uses this instead of its own naive abs(delta)/rate estimate
		whenever it's available."""
		if self.forecast_estimator is None:
			return
		remaining = self.remaining_schedule()
		if not remaining:
			return
		doc = {
			'Name': self.sud.name,
			'Description': self.sud.description,
			'pot_mass': self.sud.pot_mass,
			'pot_material': self.sud.pot_material,
			'steps': remaining,
		}
		start_theta = self.tc.get_theta_ist()
		loop = asyncio.get_event_loop()
		t, theta = await loop.run_in_executor(None, self.forecast_estimator.estimate, doc, start_theta)
		await self.send({'RemainingForecast': {'T': t, 'Theta': theta}})

	async def recv(self, data):
		for pair in data.items():
			if 'Start' in pair[0]:
				self.sud.start()
			elif 'Confirm' in pair[0]:
				self.sud.confirm()
			elif 'Pause' in pair[0]:
				self.sud.pause()
			elif 'Stop' in pair[0]:
				self.sud.stop()
			elif 'Save' in pair[0]:
				doc = self.sud.save()
				await self.send({'Json': doc})
				await self.send_forecast(doc)
			elif 'Load' in pair[0]:
				if self.sud.load(pair[1]):
					await self.send({'Name': self.sud.name, 'Description': self.sud.description})
					await self.send({'Json': pair[1]})
					await self.send_forecast(pair[1])
				else:
					# Sud.load() refuses while a run is in progress (state
					# not IDLE/DONE) - tell the client why instead of
					# silently dropping the request. The client has no
					# business pre-emptively guessing this itself from its
					# own (replicated, laggy) view of the state.
					await self.send({'Error': 'Cannot load a new schedule while a run is in progress - stop it first.'})

	async def send(self, data):
		await self.msg_handler.send(data)

	async def on_process(self):
		print("{}: Started with interval {} s".format(self.msg_handler.get_key(), self.interval))

		self.sud.set_on_changed('step', self.on_step_changed)
		self.sud.set_on_changed('state', self.on_state_changed)
		self.sud.set_on_changed('user_message', self.on_user_message_changed)
		self.sud.set_on_changed('hold_remaining', ChangedFloat(self.on_hold_remaining_changed, prec=0).set)
		self.sud.set_on_changed('elapsed', ChangedFloat(self.on_elapsed_changed, prec=1).set)

		asyncio.create_task(self.send({'Name': self.sud.name, 'Description': self.sud.description}))

		while True:
			if self.sud.state == SudState.RAMPING and self.tc.is_holding():
				self.sud.temp_reached()
			self.sud.tick(self.dt)
			await asyncio.sleep(self.interval)