Closed-loop (default, checkbox checked): TC has exclusive control over
the heater; temp-soll and heatrate-soll sliders are active; direct
heater power entry is disabled. TC now stays enabled at server startup
and whenever closed-loop mode is active — SudTask no longer disables it
on IDLE/DONE, so adjusting temp-soll manually with no sud running
immediately drives the heater via the TC.
Open-loop (checkbox unchecked, only selectable when paused/stopped):
TC is disconnected from the heater; only the heater-power slider is
active. Switching back to closed-loop resets power_soll to 0 and
re-enables the TC.
On play, the mode is automatically reset to closed-loop.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SH2D4LRuCnhLSzoYerAfJX
Shows remaining time for the current step and the entire sud in large
accent-coloured monospace text to the right of the transport buttons,
matching the per-step plate colour. Hidden until a step is active.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SH2D4LRuCnhLSzoYerAfJX
Remove one-time sync guards (initialPowerSync, initialSpeedSync) so heater
power and stirrer speed sliders track the server's ist readbacks on every
push, not just on first connect. Also remove the zero-out on sud
stop/pause: with continuous ist tracking the animation and slider always
agree, and the zero-out caused them to diverge when the server kept sending
non-zero values during a pause.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SH2D4LRuCnhLSzoYerAfJX
- Remove tab system (nav#tabs, tab-btn, tab-content) from HTML/CSS/JS
- Permanent 3-column grid: manual controls (left, 16em) | LCD+pot (center) | progress (right, fills remaining)
- LCD panel stacks above pot SVG in center column, both hidden until connected
- Step plates no longer max-width capped, fill the right column
- Slider labels moved above the slider+readout row via flex-direction: column
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DF16nV2ispNw1C9SbvqbRQ
Mirrors PyQt client which seeds doubleSpinBox_pot_temp from the
remembered ambient on startup. In the browser there is no persistence,
so the first AmbientTemp message from the server is used instead.
Flag resets on reconnect so it re-syncs if the server restarts.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DF16nV2ispNw1C9SbvqbRQ
During a running sud, all four manual sliders (temp soll, heat rate,
heater power, stirrer speed) are disabled for user input but update
their positions continuously from server pushes. They re-enable when
the sud stops or is paused, or on disconnect. Browser client also
resets initial-sync flags on reconnect so sliders re-sync correctly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DF16nV2ispNw1C9SbvqbRQ
Removing the Enabled else-if branch in a previous commit left the Soll
if-block unclosed, crashing app.js at parse time so no JS ran at all.
Also adds: onerror handler surfaces connection failures in the status
label; try/catch for invalid URL; 'Connecting…' feedback; localhost
fallback when location.hostname is empty (file:// open); wider host
input field.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DF16nV2ispNw1C9SbvqbRQ
Drops the tc-enable, heater-activate and stirrer-activate checkboxes
and all associated state, signal connections, initial-sync flags, and
channel-handler logic. Regenerates main_window.py from the updated .ui.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DF16nV2ispNw1C9SbvqbRQ
Replace clip-rect height manipulation with translate-scale-translate SVG
transform on fire-group, pivoting at the fixed base coordinate y=248.
Eliminates base-hopping caused by fill-box bounding-box drift from
individual flame flicker animations. Clip rect is now static (guards
against flicker overshoot above the pot bottom). Minimum visible flame
size floored at the scale corresponding to 1200W.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JLR2133M2PyjiYq584i2G7
sudStepIndex was reset to null in updateSudForecast whenever
isNewSchedule=true (i.e. on every fresh page load). If the Step
message arrived before Json in the global-state replay, or in a
separate message, the schedule would be rebuilt but the index
would be null, leaving grain mass as 0 with no subsequent Step
to restore it.
Step messages are the authoritative source for the current index,
so the reset is removed. The Step handler always overwrites it.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JLR2133M2PyjiYq584i2G7
Water fill height now reflects water_mass + grain_mass*0.7 (grain
displacement). A small blue tick and label on the left pot wall shows
the utilized volume in litres, hidden when the pot is unconfigured.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JLR2133M2PyjiYq584i2G7
- Stirrer starts at speed 0 (was 50) so blades don't spin on connect
- Grain particles only levitate when stirrer is running
- Fire size driven by PowerSet (soll) instead of Power (ist)
- Split animation-play-state out of stirrer shorthand for reliable pausing
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JLR2133M2PyjiYq584i2G7
Replace scaleY group transform with a dynamic clipPath that reveals
flame height proportional to heater power. Base at y=256 stays fixed;
only the tips grow with intensity. Includes flicker overshoot buffer.
Fire paths shifted +8px down, viewBox extended to 265.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DGKe8JzTM2Gr1fdx9wYXTi
35 particles distributed across full pot height, clipped to dynamic
water area via water-clip-rect updated alongside water fill level.
Particle opacity transitions on grain_mass changes per step.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DGKe8JzTM2Gr1fdx9wYXTi
- SVG fire group with 3 layered flame paths (red/orange/yellow gradients)
- CSS keyframe flicker animations with different timings per flame layer
- JS controls fire opacity and scaleY proportional to heater power
- Fix buildStep() reading grain_mass/water_mass from nested step.pot
instead of flat step keys, matching the JSON structure
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DGKe8JzTM2Gr1fdx9wYXTi
- Add volumen field to all sud JSON pot entries (30 L)
- Fix parseSudDoc to read from nested doc.pot (was using stale flat keys)
- SVG widget shows transparent rectangular pot with stirrer, thermometer
with live temperature, and water fill level (water_mass/volumen) when
a sud is loaded; no water shown when no sud is loaded
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DGKe8JzTM2Gr1fdx9wYXTi
- Browser: OK button sends Confirm without closing dialog; Escape blocked;
dialog closes when state leaves WAIT_USER (server-driven).
- PyQt: non-blocking QDialog replaces blocking QMessageBox; OK sends Confirm
without closing; dialog closed by server state change or on disconnect.
- ws_client.py: remove deprecated loop= params from websockets.connect() and
asyncio.ensure_future() (same fix already applied to ws_server.py) so the
PyQt client can actually connect with websockets >= 10.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Tqxrk8uj4M3w3d3eXm3xK8
Mirrors client/brewpi_gui.py's actionPause: btn-sud-pause sends
{"Sud": {"Pause": true}} and is only enabled while actually running
(not idle, not already paused), matching update_sud_actions()'s
enabled/disabled logic - Start already doubles as Resume while paused,
so no separate Resume control is needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0189FkmyJkY77HqsNomr1DwV
Ports show_user_message() from client/brewpi_gui.py: a plain <dialog>
pops with the step's user_message the instant WAIT_USER is newly
entered (tracked via a prevState comparison in onSudChanged()'s State
branch), and sends {"Sud": {"Confirm": true}} on the dialog's close
event - covers both the OK button and Escape dismissal.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0189FkmyJkY77HqsNomr1DwV
Ports on_action_sud_new/_save/_load() and on_action_sud_start/_stop()
from client/brewpi_gui.py: Load/Save stand in for the native file
dialogs with <input type="file">/FileReader and a Blob/<a download>,
New sends the same hardcoded empty-doc Load, and Start/Stop are gated
by updateSudActions() mirroring update_sud_actions()'s enabled/disabled
logic. Also fixes the status line's step number being one below what
the Progress tab's plates show for the same step (same bug just fixed
in the desktop client).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0189FkmyJkY77HqsNomr1DwV
A new HTML/CSS/JS client, added next to client/brewpi_gui.py rather
than replacing it, speaking the exact same WebSocket pub/sub protocol
- no server-side protocol changes needed. server/brewpi.py gains a
--http-port (default 8080) stdlib http.server.ThreadingHTTPServer,
in its own daemon thread and deliberately decoupled from the existing
asyncio WebSocket server, serving web/ statically.
v1 covers the Manual tab (direct heater/stirrer/controller control)
and the new Progress tab - the two most actionable surfaces, neither
needing a charting library. web/app.js ports the relevant logic from
brewpi_gui.py directly: components/sud.py's _build_step()/
_merge_defaults() for resolving the raw schedule doc, and the
StepPlate/_update_step_plates()/update_status_step_label() logic
behind the Progress tab and status line.
Deliberately deferred rather than stubbed (see web/TODO.md for the
full parity backlog against the Qt GUI): Sud control actions (Start/
Pause/Stop/Confirm), the Automatic tab's forecast plot and the Plot
tab's live strip charts, Sud file management, and auth (matching the
WebSocket server's own existing lack of it).
No new Python dependencies - functools/threading/http.server are all
stdlib.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019qvu5giu7gvRCyEWzf2Vpx
jensandClaude Sonnet 4.6