Callbacks were registered inside the async on_process() coroutine,
meaning they weren't active until the event loop started ticking.
Moving them to __init__ ensures they're wired up at construction time.
Also removes remaining debug prints from the affected task files.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Tqxrk8uj4M3w3d3eXm3xK8
btn_pot_reset always reset the simulated Pot to the ambient
temperature. Add doubleSpinBox_pot_temp next to it (shown/hidden
together, same as the button) so the user can dial in a different
starting temperature before committing it - it seeds from the same
remembered ambient value on startup but is otherwise independent and
not persisted.
tasks/pot.py's PotTask.recv() now resets the plant to whatever
temperature the 'Reset' message carries, falling back to ambient for
the bare True a caller might still send.
server/brewpi.py no longer pre-configures the real Pot's or Smith's model's
plant params at startup - there's no longer any generic baseline at all,
since the only source of truth is now a loaded Sud's own doc (applied via
tasks/sud.py's SudTask.apply_plant_params(), on Load and on every step).
Ambient temperature and PID gains stay configured at startup, since
they're independent of any Sud (global setting / hardware tuning, not
doc-derived).
Add Pot.is_configured() (already existed)/TempControllerBase.is_configured()/
TempController(Smith).is_configured(), and have tasks/pot.py's PotTask and
tasks/tempctrl.py's TcTask skip process() while not yet configured instead
of letting it raise - so plant and temp control are genuinely inert (not
crashing) until a Sud is loaded. "Normal" has no plant-model dependency,
so it stays active regardless.
Also refreshes README.md: removes stale tracer.py/.mat references (already
removed in an earlier commit), documents SudLogTask's JSON logs, the doc's
L/Td fields, and this inert-until-loaded behavior.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DkkuG48uHFCGKe6dPSERFk
New btn_pot_reset next to the ambient entry, sends {"Pot": {"Reset":
true}}; tasks/pot.py's PotTask.recv() (previously a no-op) now resets
the plant to its current ambient temperature (Pot.initial()) on that
command.
The button only appears when the server reports its Pot is simulated
(new "PlantSim" field on the System channel, derived from
config.json's previously-unused Controller.plant_name) - resetting a
simulated plant's temperature is meaningless for a real one.
jensandClaude Sonnet 4.6
jens